[ROOT] Rooting E/F on latest firmwares

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

mazda6
SamyGO Project Donor
Posts: 23
Joined: Fri Aug 07, 2015 8:36 pm

Re: [App] Rooting E/F on latest firmwares

Post by mazda6 » Fri Aug 14, 2015 3:50 pm

Hello

( sry for my bad english)

my TV = UE 46 F 6510

software = T-MST12DEUC-2110.1

i try it with the instructions, but it doesn't work on my TV.
i have the same problem ( picture )
ftp with fillezilla dosnt work with the IP from the TV
You do not have the required permissions to view the files attached to this post.

sectroyer
Official SamyGO Developer
Posts: 5765
Joined: Wed May 04, 2011 5:10 pm

Re: [App] Rooting E/F on latest firmwares

Post by sectroyer » Fri Aug 14, 2015 9:41 pm

It DOES work on your TV and it even works great :) Your problem is either bad samyext4.img or you are using Wi-Fi/WLAN :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

mazda6
SamyGO Project Donor
Posts: 23
Joined: Fri Aug 07, 2015 8:36 pm

Re: [App] Rooting E/F on latest firmwares

Post by mazda6 » Fri Aug 14, 2015 10:45 pm

sectroyer wrote:It DOES work on your TV and it even works great :) Your problem is either bad samyext4.img or you are using Wi-Fi/WLAN :)
i have also tested it with LAN and the samyext4.img file i have from the first site downloaded ..where i can become a good file when this one is not good

sectroyer
Official SamyGO Developer
Posts: 5765
Joined: Wed May 04, 2011 5:10 pm

Re: [App] Rooting E/F on latest firmwares

Post by sectroyer » Fri Aug 14, 2015 11:23 pm

well you should post the image from the LAN try. Also you should try debug SamyGO_data :) Everything explained in first post :P Just instead of reading you decided to simply NOT try :P
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

mazda6
SamyGO Project Donor
Posts: 23
Joined: Fri Aug 07, 2015 8:36 pm

Re: [App] Rooting E/F on latest firmwares

Post by mazda6 » Sat Aug 15, 2015 7:36 pm

sectroyer wrote:well you should post the image from the LAN try. Also you should try debug SamyGO_data :) Everything explained in first post :P Just instead of reading you decided to simply NOT try :P
I do not sheep, did everything as Introduction. created folder SamyGO_data.zip from SamyGO.zip file samyext4.img, run.sh, run1.sh, data.zip desired term.
SamyGO-F-SM-MST-Fix USB pasted on USB
USB to TV smatrhub, instaliert Folder SamyGO-F-SM-MST-Fix
get the following screenImage television off and on again does not happen next
FTP connection unsuccessful (user, pass ??

sectroyer
Official SamyGO Developer
Posts: 5765
Joined: Wed May 04, 2011 5:10 pm

Re: [App] Rooting E/F on latest firmwares

Post by sectroyer » Sat Aug 15, 2015 7:41 pm

mazda6 wrote:
sectroyer wrote:well you should post the image from the LAN try. Also you should try debug SamyGO_data :) Everything explained in first post :P Just instead of reading you decided to simply NOT try :P
I do not sheep, did everything as Introduction. created folder SamyGO_data.zip from SamyGO.zip file samyext4.img, run.sh, run1.sh, data.zip desired term.
SamyGO-F-SM-MST-Fix USB pasted on USB
USB to TV smatrhub, instaliert Folder SamyGO-F-SM-MST-Fix
get the following screenImage television off and on again does not happen next
FTP connection unsuccessful (user, pass ??
See red NO in /dtv/SamyGO. You need to reroot and switch to cable. Also you did NOT do everything as explained in first post. Last point of instruction says:
In case of issues:
SPOILER: SHOW
It doesn't look you did read it :P
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

mazda6
SamyGO Project Donor
Posts: 23
Joined: Fri Aug 07, 2015 8:36 pm

Re: [App] Rooting E/F on latest firmwares

Post by mazda6 » Sat Aug 15, 2015 8:34 pm

sectroyer wrote:
mazda6 wrote:
sectroyer wrote:well you should post the image from the LAN try. Also you should try debug SamyGO_data :) Everything explained in first post :P Just instead of reading you decided to simply NOT try :P
I do not sheep, did everything as Introduction. created folder SamyGO_data.zip from SamyGO.zip file samyext4.img, run.sh, run1.sh, data.zip desired term.
SamyGO-F-SM-MST-Fix USB pasted on USB
USB to TV smatrhub, instaliert Folder SamyGO-F-SM-MST-Fix
get the following screenImage television off and on again does not happen next
FTP connection unsuccessful (user, pass ??
See red NO in /dtv/SamyGO. You need to reroot and switch to cable. Also you did NOT do everything as explained in first post. Last point of instruction says:
In case of issues:
SPOILER: SHOW
It doesn't look you did read it :P
and again i have no conection with ftp do i need user/password?
Image

sectroyer
Official SamyGO Developer
Posts: 5765
Joined: Wed May 04, 2011 5:10 pm

Re: [App] Rooting E/F on latest firmwares

Post by sectroyer » Sat Aug 15, 2015 8:37 pm

mazda6 wrote: and again i have no conection with ftp do i need user/password?
Image
No you do NOT need user/password. But you DO need to follow directions. Now your log looks better I am still not sure you are using LAN or Wi-Fi... Also please use debug SamyGO_Data etc. to get log :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

mazda6
SamyGO Project Donor
Posts: 23
Joined: Fri Aug 07, 2015 8:36 pm

Re: [App] Rooting E/F on latest firmwares

Post by mazda6 » Mon Aug 17, 2015 8:45 am

sectroyer wrote:
mazda6 wrote: and again i have no conection with ftp do i need user/password?
Image
No you do NOT need user/password. But you DO need to follow directions. Now your log looks better I am still not sure you are using LAN or Wi-Fi... Also please use debug SamyGO_Data etc. to get log :)

what should happen when the dasa TV turn off and on again, the widget automatically starters, dobijemli a message on the screen

thanks :(

sectroyer
Official SamyGO Developer
Posts: 5765
Joined: Wed May 04, 2011 5:10 pm

Re: [App] Rooting E/F on latest firmwares

Post by sectroyer » Mon Aug 17, 2015 10:24 am

mazda6 wrote: what should happen when the dasa TV turn off and on again, the widget automatically starters, dobijemli a message on the screen

thanks :(
Well users should read first post and use Debug SamyGO_data but they don't. Also users should NOT use Wi-Fi :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

Post Reply

Return to “[F] Software”