Page 149 of 255

Re: [App] Rooting E/F on latest firmwares

Posted: Mon Sep 07, 2015 2:55 pm
by robert90
majklcze wrote:Now i need to get the OSCAM working :) can somebody point me where to start?
http://tanjasoft.com/how-to/install-osc ... -series-h/

Here you will find a manual and the necessary files. Costs a few euros , but works very well.

Re: [App] Rooting E/F on latest firmwares

Posted: Tue Sep 08, 2015 9:12 pm
by stefan81
Hi, i have a problem to install samygo on my F6500 Tv, i hope anyone can help me. I know that i don't update my TV firmware if samygo is installed on tv.
But i did it, because i had a problem with smart hub. Now i haven't problems with smart hub anymore, but i have now the problem, samygo does not work anymore.
I can install samy go on new firmware but it doesn't run. What can i do? Are there old samygo data on TV because new installation does not work? Helps to Reset the Tv on service men? ?
Now runs samy go never because I have made a firmware update? My Firmware is 2111. I have tried different usb sticks too, OTN is off, Lan Cable ok, fat format, fat32 format.

Re: [App] Rooting E/F on latest firmwares

Posted: Wed Sep 09, 2015 11:29 am
by sectroyer
stefan81 wrote:Hi, i have a problem to install samygo on my F6500 Tv, i hope anyone can help me. I know that i don't update my TV firmware if samygo is installed on tv.
But i did it, because i had a problem with smart hub. Now i haven't problems with smart hub anymore, but i have now the problem, samygo does not work anymore.
I can install samy go on new firmware but it doesn't run. What can i do? Are there old samygo data on TV because new installation does not work? Helps to Reset the Tv on service men? ?
Now runs samy go never because I have made a firmware update? My Firmware is 2111. I have tried different usb sticks too, OTN is off, Lan Cable ok, fat format, fat32 format.
Well I can tell you that prices of chickens went up :) Not sure about pork :) Let me know if you need any more info since obviously you do NOT want help with rooting since you did NOT read first post and/or did NOT follow instructions :P

Re: [App] Rooting E/F on latest firmwares

Posted: Wed Sep 09, 2015 5:56 pm
by stefan81
I'm sorry but my english is not very good I've probably misunderstood something.
I've actually tried everything like the 1st thread described but I do not get to run.
With the modified run.sh unfortunately no file is written to the stick.
20150909_180234.jpg
On the stick just a .cm00013 file is written
Is there because I did the firmware update is now no possibility more Samygo to get started?

Samy go is now even when I started the debug2 recopied and there was a log be created:
sam.log

Unfortunately after another reboot no longer functional

Re: [App] Rooting E/F on latest firmwares

Posted: Wed Sep 09, 2015 8:35 pm
by sectroyer
stefan81 wrote:I'm sorry but my english is not very good I've probably misunderstood something.
I've actually tried everything like the 1st thread described but I do not get to run.
With the modified run.sh unfortunately no file is written to the stick.
20150909_180234.jpg
On the stick just a .cm00013 file is written
Is there because I did the firmware update is now no possibility more Samygo to get started?

Samy go is now even when I started the debug2 recopied and there was a log be created:
sam.log

Unfortunately after another reboot no longer functional
Well the log looks like you are using "wifi" :) Also did you check telnet on port 5023 ? :)

Re: [App] Rooting E/F on latest firmwares

Posted: Wed Sep 09, 2015 8:46 pm
by stefan81
No i don't use wlan i use Lan!!! I used WLAN before i root the tv first, but i switched on lan before i made the root. Port 5023 don't work. When i root again,should i use the USB flash drive reformat and copy the 2 Folders on stick again, or can i use the old file system on stick?

Re: [App] Rooting E/F on latest firmwares

Posted: Wed Sep 09, 2015 8:56 pm
by sectroyer
stefan81 wrote:No i don't use wlan i use Lan!!! I used WLAN before i root the tv first, but i switched on lan before i made the root. Port 5023 don't work. When i root again,should i use the USB flash drive reformat and copy the 2 Folders on stick again, or can i use the old file system on stick?
Best is to use FAT formatted usb :) And if you change "sleep" and it stops working in 99.99% cases it means you are editing file incorrectly. If you "break" such it will NEVER work :)

Re: [App] Rooting E/F on latest firmwares

Posted: Wed Sep 09, 2015 9:05 pm
by stefan81
I don't have edit "sleep" because i have no ftp access to edit this!!! Or is this possible to edit on USB Stick?

Re: [App] Rooting E/F on latest firmwares

Posted: Wed Sep 09, 2015 9:08 pm
by zoelechat
1ST POST wrote:If no root at all, try to replace SamyGO-F-SM-MST-Fix/data/data.zip by this one on USB. This file already includes 'sleep 120' before autostart, so restart rooting procedure and wait at least 3-4 minutes before checking root.
You didn't read until the end, that's bad :)

Re: [App] Rooting E/F on latest firmwares

Posted: Wed Sep 09, 2015 9:22 pm
by RebornID
Make your Usb Stick new, with a small partition 1GB.
Sleep can you add in the "rcSGO"-File direct on your USB Stick. (Find File here: SamyGO-F-SM-MST-Fix -> data -> data.zip -> SamyGO)