Hello, some feedback,
I received an answer from Samsung with 3 Suggestions
(1) Format the HDD.
So, I made a copy of its contents, formatted the drive completely with another file system (NTFS instead of FAT32), and then copied the contents back on it.
Well...
NO CHANGE.
From my experiments I can conclude the following regarding how the Samsung software manages the thumbnails and last playing position:
- It keeps a table or database which classifies the entries by a HDD ID that is persistent.
- That table / database is capable of storing a fixed number of entries for which it stores the above mentioned data.
- Once the table is full, no new entries are stored and there is no mechanism of purging/deleting old entries.
- If you change the name of a file/video on your HDD (and plug it back into the TV (and play it)), it will simply add another entry for that HDD, if its "table" is not full yet.
The only solution I have so far (without trying to reset the TV) is to use a different HDD because then it would generate a new table linked to that new HDD ID.
They also suggested (2) and (3) but that would imply losing my settings.
So I took quick pictures of all my settings and went ahead...
(2) Reset the TV
1-Press the Source Button on the TV remote control and select TV.
2-Hold down the Exit Button on the TV remote control until you get a message saying ?Reset all settings back to default values".
3-Press OK to confirm the message, and the TV will turn off.
4-Turn TV back on and proceed with the Initial Setup Process.
---> IT WORKED !
Before the reset, I had formatted my HDD again (FAT32) and put a video that I had never played before, to confirm the problem was there: indeed, after playing, no thumbnail was generated, and no "resume" position was recorded.
Then I did the reset as described above. I reconfigured everything to my previous settings.
With the HDD still in place I played the same video and stopped after a few minutes, and there it was: thumbnail !
And when I pressed play I could again press "D" to resume where I left off.
Problem solved.
I am glad as I really didn't feel like risking the upgrade of (3)
(3) Update the firmware
Please follow the below link and steps:
http://www.samsung.com/uk/support/model/UE40C6000RKXXU
1. Kindly download the firmware file from Samsung website to your computer.
2. Then connect the USB Memory Drive to the USB port of your PC. Copy the file onto the USB Memory Drive.
3. After that go to the USB Memory Drive, and then double click the file.
4. Then Click the 'Install' button.
5. The file will be installed
6. Please Confirm that a folder containing the firmware files has been added to the USB memory drive.
7. Then please safely disconnect the USB memory drive by right clicking the green check mark on the Task-bar, and then left clicking ?Safely Remove'.
8. After that Insert the USB Memory Drive containing the firmware into the USB port of TV.
9. Now, kindly Press the MENU button, select Support, Software Upgrade and then 'By USB'.