[App] libFactory E/F/H

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

yogik
SamyGO Project Donor
Posts: 6
Joined: Fri Dec 12, 2014 10:13 am

Re: [App] libFactory E/F/H

Post by yogik »

I'm wrong English.

- I tried libFactory on UE48H6260 FW2606.2
https://ctrlv.it/id/38057/2175499139

I bought the TV in AT and I want to use it in SVK

After entering:

Code: Select all

/Mnt/opt/privateer/usr/bin/samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libFactory.so SET:20=0.194=7
SET: 20 = 0 performed
But SET: 194 = 7 did not

Why?

The "LocalSET" in service menu is hidden
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libFactory E/F/H

Post by zoelechat »

Because as told in 1st post in red bold it's unallowed:
1ST POST wrote:Only setting of values from sample usages below are allowed, to protect the innocent (and because of 2 bricks while testing...)
Don't readShow
If you want to set values outside 20,22,205,398 anyway...Show
You sure??Show
Really?Show
Use BRICKMODE arg, but only YOU take the responsibility. You're warned.
Know that worst case scenario is EEPROM reset needed (shortcut on mainboard etc=theoretically not true brick, but guaranteed pain in the ass!). Don't expect any support then because you were warned !!
To set Local Set, you have to unlock extended service menu, check wiki for how to.

Btw, beware that SET:values have to be COMMA separated, not dot!!!
I do NOT receive any PM. Please use forum.
Bizzmo
SamyGO Project Donor
Posts: 7
Joined: Sat Jan 09, 2016 10:33 pm

Re: [App] libFactory E/F/H

Post by Bizzmo »

I have a SAMSUNG UE55F7005 rooted and with Samygo activated.

I have extracted and uploaded libFactory.so in / mnt / opt / privater / usr / libso.

With TV ON, I use Putty to telnet and try to enter the extended service menu.

I have tried two different commands, However, nothing happens. Is this still working?

Code: Select all

1. samyGOso -d -A -B -l /mnt/opt/privateer/usr/libso/libFactory.so ENTERMENU

2. /mnt/opt/privateer/usr/bin/samyGOso -d -A -B -l /mnt/opt/privateer/usr/libso/libFactory.so ENTERMENU
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libFactory E/F/H

Post by zoelechat »

What does tell command output? and lib log?
I do NOT receive any PM. Please use forum.
Bizzmo
SamyGO Project Donor
Posts: 7
Joined: Sat Jan 09, 2016 10:33 pm

Re: [App] libFactory E/F/H

Post by Bizzmo »

zoelechat wrote: Fri Jul 28, 2017 8:59 pm What does tell command output? and lib log?
Hi Zoel

Putty (telnet) return no information when I run the two commands.

I also cannot find "Factory.log" un der /dvt/. It's missing.
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libFactory E/F/H

Post by zoelechat »

Then something's wrong with your terminal (samyGOso HAS output), nothing to do with lib. Try to not use Putty, use Windows Telnet client for example. On port 23 of course, if needed to remind it.
I do NOT receive any PM. Please use forum.
Bizzmo
SamyGO Project Donor
Posts: 7
Joined: Sat Jan 09, 2016 10:33 pm

Re: [App] libFactory E/F/H

Post by Bizzmo »

Thanks!

I did upgrade SamyGOso to the latest version(1.2.5), rebooted my TV and now it's working. I'm able to reach the extended service menu. Great addon!
bogdan0
SamyGO Project Donor
Posts: 20
Joined: Sun Jul 16, 2017 6:04 pm

Re: [App] libFactory E/F/H

Post by bogdan0 »

Thank you for your support!

Here is my extended log:
https://ctrlv.it/id/42963/3640440846
PS51F8500 (transformed from PN518500) T-FXPDEUC-1114.1

There are some lines where is written "failed". Is there anything that I should be worried?
https://ctrlv.it/id/42963/3640440846
PS51F8500 (from PN518500) T-FXPDEUC-1125 (from 1114.1) SamyGo, fixed HBOGO; Still learning this :D
zoelechat
SamyGO Moderator
Posts: 8615
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [App] libFactory E/F/H

Post by zoelechat »

bogdan0 wrote: Sat Sep 02, 2017 8:48 pm There are some lines where is written "failed". Is there anything that I should be worried?
No worry, it's expected and common to most multi-series libs.
I do NOT receive any PM. Please use forum.
mad_ady
SamyGO Project Donor
Posts: 268
Joined: Sun May 03, 2015 10:42 am

Re: [App] libFactory E/F/H

Post by mad_ady »

@zoelechat: I'm sorry, this is probably the wrong thread, but I think I remember that one of your libs (maybe this one) allowed me to get to extended service menu without the special remote codes. Can you point me in the right direction or update the wiki, please? https://wiki.samygo.tv/index.php?title= ... mple_steps
H6400, firmware 2602.2 downgraded to 2130

Post Reply

Return to “[F] Software”