Samsung UA46F7500 restarts after change region

Here is information about customize your F series firmware.

Intruder112
Posts: 3
Joined: Mon Jan 13, 2014 7:01 am

Samsung UA46F7500 restarts after change region

Post by Intruder112 »

Hi. My TV is Samsung UA46F7500. I entered Service menu and changed region and tuner model. After that Tv is restarting. Appears SMART TV logo, after 3 icons, then black screen and after 10 seconds TV rebooting. I've tried 12-15 sec pressing EXIT agter Left arrow and Enter but nothing. Then i tried reset EEPROM chip S24C51 by shorting pins SDA+SCL, SDA+VCC, SCL+VCC, GND+SDA, GND+SCL. When i short them SMART TV logo appears upside down, icons changes from 3 to 5, black screen and restarts. So i can't reset EEPROM. When i realese pins TV ceep restarting with normal logo and 3 icons again. How can i fix this issue.

Thank you veru much
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Samsung UA46F7500 restarts after change region

Post by juusso »

pin 4+5 OR 5+6 , but be sure you do everything according instruction on wiki.

now i see you do everything wrong. are you trying to burn your mainboard?

1. unplug TV from electricity
2. make short connection and don`t release
3. power to the wall and wait until LCD is on
4. release short circuit
5. power OFF using RC to stand by
6. info-menu-mute-power (or mute 1 8 2 power) and set proper values.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
Intruder112
Posts: 3
Joined: Mon Jan 13, 2014 7:01 am

Re: Samsung UA46F7500 restarts after change region

Post by Intruder112 »

Thank you for reply. I'll try.
Intruder112
Posts: 3
Joined: Mon Jan 13, 2014 7:01 am

Re: Samsung UA46F7500 restarts after change region

Post by Intruder112 »

juuso wrote:pin 4+5 OR 5+6 , but be sure you do everything according instruction on wiki.

now i see you do everything wrong. are you trying to burn your mainboard?

1. unplug TV from electricity
2. make short connection and don`t release
3. power to the wall and wait until LCD is on
4. release short circuit
5. power OFF using RC to stand by
6. info-menu-mute- (or mute 1 8 2 power) and set proper values.
Hi. You're quite right. My wrong is i did not released short circuit in time. I did everything as you advised and TV revived. Just i did not turned off TV because it entered service mode by itself after that i released short circuit.

Thank you very much Sir.
Herold
Posts: 2
Joined: Sat Mar 22, 2014 12:46 pm

Re: [solved]Samsung UA46F7500 restarts after change region

Post by Herold »

Hi,
I'm new in this forum. have the same issue. my question is, what do you mean with short connection. how i do it?
Thank you.
sdsp
Posts: 23
Joined: Mon Apr 14, 2014 10:20 pm

Re: [solved]Samsung UA46F7500 restarts after change region

Post by sdsp »

Thank you for your great forum!
Unfortunately i don't understand too, i have the same problem, please explain more, i just changed my local-set and that's happened to me!
Thank you in advance for any help.
H8000
Tshumfu
Posts: 3
Joined: Mon Sep 18, 2017 7:22 am

Re: [solved]Samsung UA46F7500 restarts after change region

Post by Tshumfu »

Hi I have F7500 I am having the same problem however when holding the wire I hear a clicking sounds after 30sec, 45sec, 60sec, I release the wire then it reboots and continues to do the same thing.

I assumed I am holding wires on the wrong pins when I place on the other side of the eprom the logo is upside down and when it restarts it just does the same thing.

I am unable to go standby mode and I assume that is the reason I cant go to the service menu.

Please help!!! WHAT AM I DOING WRONG?
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: [solved]Samsung UA46F7500 restarts after change region

Post by juusso »

Use IR method and send INFO+FACTORY while TV is on and you get directly to service menu. You can try any of available methods ( http://wiki.samygo.tv/index.php?title=H ... SPEED_keys ). Most simple is mobile phone with IR port + SRC app.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
Tshumfu
Posts: 3
Joined: Mon Sep 18, 2017 7:22 am

Re: Samsung UA46F7500 restarts after change region

Post by Tshumfu »

Hi I tried using the IR but my time is insufficient before the bootloop. It freezes and reboots or sometimes the screen turns blank then it clicks and reboots. Please help.
araya23
Posts: 1
Joined: Sun Jun 09, 2019 11:55 pm

Re: Samsung UA46F7500 restarts after change region

Post by araya23 »

juusso wrote: Mon Jan 13, 2014 12:52 pm pin 4+5 OR 5+6 , but be sure you do everything according instruction on wiki.

now i see you do everything wrong. are you trying to burn your mainboard?

1. unplug TV from electricity
2. make short connection and don`t release
3. power to the wall and wait until LCD is on
4. release short circuit
5. power OFF using RC to stand by
6. info-menu-mute-power (or mute 1 8 2 power) and set proper values.
Thanks to this post I was able to fix my Samsung UN50NU7090. First I tried VCC+SDA several times without success. GRD+SDA didn't work either. Fortunately, VCC+SCL did the trick for me. Also, the info in the wiki site on how to unbrick the TV by EEPROM reset was extremely helpful.(https://wiki.samygo.tv/index.php/UnBric ... set#EEPROM).

Thank you so much!

Post Reply

Return to “[F] Firmware”