Page 1 of 2

Boot Loop After Change Region

Posted: Fri Jan 20, 2017 11:58 am
by steppdroid
Hello,
After changing region in my Samsung SmartTv EU40F6320, tv went into boot loop... I see Logo power on after black screen , after 20 second restart in loop :( Please help!

MY Board:
MODEL: BN41-01958
SpoilerShow
Image
Image
Image

Re: Boot Loop After Change Region

Posted: Fri Jan 20, 2017 12:19 pm
by juusso
Eeprom reset may help. More info: http://wiki.samygo.tv/index.php5?title= ... M_location

IC901 is your chip, IMHO. it`s ATMLH348 2EC IC Memory.

update: BN41-01958A/BN41-01958B main EEprom: IC901 ATMLH348 2EC (24C256)

Re: Boot Loop After Change Region

Posted: Fri Jan 20, 2017 2:29 pm
by steppdroid
Thanks for a reply, for reset eeprom, connect EEPROM_GND with H_Reset?
SpoilerShow
Image

Re: Boot Loop After Change Region

Posted: Fri Jan 20, 2017 2:55 pm
by juusso
Pls consult wiki . I uploaded picture.

Your attached picture is wrong. Dont do short circuit between gnd and vcc.

Do short on SCL and gnd during tv boot up.

Re: Boot Loop After Change Region

Posted: Fri Jan 20, 2017 3:57 pm
by steppdroid
I just tried but nothing... :(

Re: Boot Loop After Change Region

Posted: Fri Jan 20, 2017 5:44 pm
by juusso
Many users havent got success from first try. You have to read procedure steps carefuly, and be quick and patient enough to repeat again and again.

To be sure- did you unplug tv from wall after you got no success?

Re: Boot Loop After Change Region

Posted: Sat Jan 21, 2017 10:33 am
by steppdroid
Hi , i sloved with this Guide https://forum.samygo.tv/viewtopic.php?f=66&t=11246
" Install jumper like a small wire into holes named eeprom_gnd and eeprom_sda"
Thank! :)

But now i have another problem! ahahha
In my smart Hub not find samsung apps...

In "Type" what code should I choose? After reset eeprom it was set to "NONE"
SpoilerShow
Image

Re: Boot Loop After Change Region

Posted: Sat Jan 21, 2017 10:42 am
by juusso
Yes, these holes are alternative, good it worked for you.

Need search for values in "Type"...

Try 40A2UF8E

Re: Boot Loop After Change Region

Posted: Sat Jan 21, 2017 10:52 am
by steppdroid
Do you think the choice of the "Type" affects smart Hub?

Re: Boot Loop After Change Region

Posted: Sat Jan 21, 2017 10:55 am
by juusso
No idea . You asked for type, i answered.

Try reset smarthub. Might help.

https://www.hideipvpn.com/setup/change- ... smart-hub/