Re: Boot Loop After Change Region
Posted: Sat Jan 21, 2017 11:02 am
I haven't 40A2UF8E 
I had already tried with smart Hub reset. but nothing
I had already tried with smart Hub reset. but nothing
Page 2 of 2
Re: Boot Loop After Change Region
Posted: Sat Jan 21, 2017 11:13 am
Ask someone with similar TV (F6xxx) to check their settings in SM for you. If rooted - with help of libFactory
Re: Boot Loop After Change Region
Posted: Sat Jan 21, 2017 11:16 am
Where find the firmware test ? T-MST12DEUC_0000 ?
edit: finded!!
https://forum.samygo.tv/viewtopic.php?f=63&t=11378
i try with downgrade to firmware test!
edit: finded!!
https://forum.samygo.tv/viewtopic.php?f=63&t=11378
i try with downgrade to firmware test!
Re: Boot Loop After Change Region
Posted: Sat Jan 21, 2017 11:59 am
at 30% of update i get : Update Failed. Grrrrrrrrrrrr
If I turn off the tv will be bricked?! :'(
If I turn off the tv will be bricked?! :'(
Re: Boot Loop After Change Region
Posted: Sat Jan 21, 2017 9:15 pm
Chek here viewtopic.php?f=52&t=11475#p97339
Re: Boot Loop After Change Region
Posted: Wed Jan 25, 2017 6:24 pm
Hi Juusso, now internet with the cable lan not work..
I have Wired Mac Fail, how slove this?
I have Wired Mac Fail, how slove this?
Re: Boot Loop After Change Region
Posted: Wed Jan 25, 2017 8:25 pm
Different models, but worth to try:
http://support-us.samsung.com/cyber/pop ... ][quote]If the connection is failing at the MAC Address, there will be no information in the MAC Address section of the Network Test. This error indicates an issue with the network adapter in the TV. To troubleshoot, perform the following:
Wired or Wi-Fi connection (No Linkstick):
If the MAC Address fails, perform a factory reset, and then run the network test again.
If the MAC Address continues to fail, the TV will require service.
If available, the TV may still function using the other type of connection. (If Wi-Fi fails, try a wired connection, or vice versa.)
[/quote][/spoiler]
http://support-us.samsung.com/cyber/pop ... idx=150764&
http://support-us.samsung.com/cyber/pop ... ][quote]If the connection is failing at the MAC Address, there will be no information in the MAC Address section of the Network Test. This error indicates an issue with the network adapter in the TV. To troubleshoot, perform the following:
Wired or Wi-Fi connection (No Linkstick):
If the MAC Address fails, perform a factory reset, and then run the network test again.
If the MAC Address continues to fail, the TV will require service.
If available, the TV may still function using the other type of connection. (If Wi-Fi fails, try a wired connection, or vice versa.)
[/quote][/spoiler]
http://support-us.samsung.com/cyber/pop ... idx=150764&
Re: Boot Loop After Change Region
Posted: Mon May 01, 2017 8:36 pm
same problem same tv but if use this method he said pleas go into service mode and setup blew options and Remote Control Don't Work ! pleas halp
Re: Boot Loop After Change Region
Posted: Tue Dec 12, 2017 2:08 pm
Hi.steppdroid wrote: ↑Sat Jan 21, 2017 10:33 am Hi , i sloved with this Guide https://forum.samygo.tv/viewtopic.php?f=66&t=11246
" Install jumper like a small wire into holes named eeprom_gnd and eeprom_sda"
Thank!
But now i have another problem! ahahha
In my smart Hub not find samsung apps...
In "Type" what code should I choose? After reset eeprom it was set to "NONE"
SpoilerShow
Sorry to trouble you. Did you manage to get any apps? I have the same problem...