SamyGO

connected to rpi like you showed me in attached photos?

yar, bought an usb extension cord, cut it and then connected like in pics. original rpi serial has TTL which doesnt work

@Tamagnun
just search wiki for 3.5 exlink.[/quote]

Yes, thank you, I'll do it in the future. At the moment I have stopped the serial output analysis "project": too many things to follow and understand at the same time!!
Also because I don't know what I will be able to do with the serial access...

I want to confirm that this works also on a F5000

bugficks wrote:levi, did you change anything else in service menu beside "uart:debug" and "watchdog:off" ? like setting "USB Serial: Off" to "On" ?

Hi, sorry for late reply, somehow i did not received notification on topic response...
No i didn't found any "USB Serial switch" in SM.

USB-Serial also works good. No need to removing rear cover and soldering pins to PCB.

One important issue is whether regular usb devices (pen drive's) still work on camera usb port when you set usb-serial to on? And if they don't work does it cause any problems when you (accidentally) plug usb stick in?

What i need to use the usb debug console? What a cable i need or what i must do to get access?
I have a UE46F6270 with FW 2110.1
I must kill a running background loop script.

Hello!
I have a UE22F5410AK.
What i need to use the debug console?

pro777 wrote: ↑Fri Aug 02, 2019 2:13 pm Hello!
I have a UE22F5410AK.

I confirm that the debugging console works when connected to the USB port with the following parameters: USB-Serial TTL 115200/8/n/1.