[ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)

Here are software that related with Samsung H series TVs.
Please don't create any new topic here unless you have software to post/release.
Post Reply

Serge
SamyGO Project Donor
Posts: 31
Joined: Fri Oct 09, 2015 8:14 pm

Re: [!!!] Rooting H on latest firmwares

Post by Serge »

2 Sectroyer help please
Can connect by ftp or telnet
Serge wrote:2 Sectroyer
sectroyer wrote:Your photo is very good but unfortunately you didn't follow first post (as well as my signature) on how to paste/attach log files so unfortunately I am NOT able to help you :) Good luck :)
Look please: can't connect to ftp or telent
p.s.all blocks and adn do all by instruction,


wifi_vendor.txt
SpoilerShow
2
insmod_qca.sh
SpoilerShow
echo " insmod_qca.sh begin"
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x16
echo " insmod_qca.sh end"
sam.log
SpoilerShow
+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sda1/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sda1/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
+ [ 8 -ne 0 ]
+ /bin/dmesg
+ /bin/grep antysfd
+ /bin/busybox tail -n 1
+ /bin/busybox cut -d ' -f 4
+ good_vermagic=0135, product SMP preempt mod_unload ARMv7
+ echo good vermagic='0135, product SMP preempt mod_unload ARMv7 '
good vermagic='0135, product SMP preempt mod_unload ARMv7 '
+ echo 0135, product SMP preempt mod_unload ARMv7
+ /bin/dmesg
+ /bin/busybox grep anty
antysfd: version magic '0177, product SMP preempt mod_unload ARMv7 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' should be '0135, product SMP preempt mod_unload ARMv7 '
+ chmod +x /tmp/ntkfree
Terminated
+ mknod /dtv/ntkaxis c 140 0
Terminated
+ /tmp/ntkfree
Terminated
+ cp /dtv/usb/sda1/SamyGO/samyGOso /tmp/
Terminated
+ cp /dtv/usb/sda1/SamyGO/libNetSwitch.so /tmp/
Terminated
+ chmod +x /tmp/samyGOso
Terminated
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sda1/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sda1
checking /dtv/usb/sda1
+ /bin/sleep 1
+ [ -e /dtv/usb/sda1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
Terminated
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
Terminated
+ cp /dtv/usb/sda1/SamyGO/samygo_telnetd /dtv/
Terminated
+ chmod +x /dtv/samygo_telnetd
Terminated
+ cp /dtv/usb/sda1/SamyGO/busybox /tmp/bin/
+ /dtv/samygo_telnetd 33
/dtv/usb/sda1/SamyGO/run1.sh: line 22: /dtv/samygo_telnetd: not found
Terminated
+ chmod +x /tmp/bin/busybox
Terminated
+ /tmp/bin/busybox --install -s /tmp/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 27: /tmp/bin/busybox: not found
+ sync
Terminated
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
Terminated
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
/dtv/usb/sda1/SamyGO/run1.sh: line 32: /tmp/bin/busybox: not found
Terminated
+ ln -s /dev/loop3 /tmp/loopnone
Terminated
+ sync
Terminated
+ [ -e /dtv/usb/sda1/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox --install -s /mnt/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 45: /tmp/bin/busybox: not found
+ sync
Terminated
+ rm /mnt/sam.log
Terminated
/dtv/usb/sda1/SamyGO/run1.sh: line 48: can't create /mnt/sam.log: Read-only file system
+ ls -la /mnt/*
/dtv/usb/sda1/SamyGO/run1.sh: line 49: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 50: can't create /mnt/sam.log: Read-only file system
+ echo Starting rcSGO from run1.sh
/dtv/usb/sda1/SamyGO/run1.sh: line 51: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 52: can't create /mnt/sam.log: Read-only file system
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt
You do not have the required permissions to view the files attached to this post.
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: [!!!] Rooting H on latest firmwares

Post by sectroyer »

Thanks for set of logs. Now helping you is simple. Please rename data_0x16.zip to data.zip and re-root. :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
Serge
SamyGO Project Donor
Posts: 31
Joined: Fri Oct 09, 2015 8:14 pm

Re: [!!!] Rooting H on latest firmwares

Post by Serge »

sectroyer wrote:Thanks for set of logs. Now helping you is simple. Please rename data_0x16.zip to data.zip and re-root. :)
and original data.zip delete?
Top
Serge
SamyGO Project Donor
Posts: 31
Joined: Fri Oct 09, 2015 8:14 pm

Re: [!!!] Rooting H on latest firmwares

Post by Serge »

IT'S WORKKKKK
run but was with some erros

but now i can enter telnet

Thank you very much
You do not have the required permissions to view the files attached to this post.
Top
wifi75
SamyGO Project Donor
Posts: 96
Joined: Tue Oct 20, 2015 8:25 pm

Re: [!!!] Rooting H on latest firmwares

Post by wifi75 »

I've UE55H6670 whit original firmware 2770 T-MST14DEUC2770.
For rooting is better try skype mode or this guide?
Top
viktor67
SamyGO Project Donor
Posts: 4
Joined: Tue Jan 20, 2015 11:59 am

Re: [!!!] Rooting H on latest firmwares

Post by viktor67 »

Can you help me

Code: Select all

insmod_qca.sh
echo " insmod_qca.sh begin"
echo 1 > /dtv/NET_OK
/bin/sh /mtd_rwarea/network/runSamyGO.sh &
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x37
echo " insmod_qca.sh end"

Code: Select all

network_type_info.txt
CurrentType=1

Code: Select all

wifi_vendor.txt
4
You do not have the required permissions to view the files attached to this post.
UE65HU8590,T-GFP9DEUC_1190
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: [!!!] Rooting H on latest firmwares

Post by sectroyer »

What you attached is NOT original file!!! :)Switch to wifi and reboot, lan, reboot, switch to wifi reboot :) Then re-root and re-atttach files :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
0dino
SamyGO Project Donor
Posts: 9
Joined: Mon Oct 19, 2015 4:07 pm

Re: [!!!] Rooting H on latest firmwares

Post by 0dino »

0dino wrote:hi there. im trying to root my UE48H6410 with 2770.0 firmware. im trying to follow the guide but i have some problems.

1st) "It seems that having both a recording device AND the rooting USB attached helps a lot.
To "create" a recording device: Shut down TV. Unplug usb with rooting data. Plug one of your free USB disks. Start TV and once it loads hit REC, it will ask if it can format the disk. Format and record something then shutdown TV, attach SECOND usb (the one with rooting data), start TV :)" when i plug the usb and hit rec i dont get message to format.

2nd) "Menu->System->General->Quickly Power OFF Samsung - this option must be OFF
Menu->System->General->Samsung Instant ON - this option must be OFF i dont have those setting in my menu.

3nd) "Launch ONLY ONCE InstallSamyGO-H from SmartHub (if it doesn't appear reboot TV). Sometimes it is necessary to connect USB WHILE TV IS OFF!!! Remember to MAKE A PHOTO of rooting app log!!!" how to launch an app from USB?

hope u can help me.
none can help me?
Top
Serge
SamyGO Project Donor
Posts: 31
Joined: Fri Oct 09, 2015 8:14 pm

Re: [!!!] Rooting H on latest firmwares

Post by Serge »

Next trouble
i can connect by telent

but can't by ftp
how i can fix it?
need any login and password? ( i try with anonymous as login)


SAMY.LOG
SpoilerShow
+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sda1/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sda1/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
+ [ 8 -ne 0 ]
+ /bin/dmesg
+ /bin/busybox tail -n 1
+ /bin/busybox cut -d ' -f 4
+ /bin/grep antysfd
+ good_vermagic=
+ echo good vermagic=''
good vermagic=''
+ echo
+ /bin/busybox grep anty
+ /bin/dmesg
+ chmod +x /tmp/ntkfree
Terminated
+ mknod /dtv/ntkaxis c 140 0
Terminated
+ /tmp/ntkfree
Terminated
+ cp /dtv/usb/sda1/SamyGO/samyGOso /tmp/
Terminated
+ cp /dtv/usb/sda1/SamyGO/libNetSwitch.so /tmp/
Terminated
+ chmod +x /tmp/samyGOso
Terminated
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sda1/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sda1
checking /dtv/usb/sda1
+ /bin/sleep 1
+ [ -e /dtv/usb/sda1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
Terminated
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
Terminated
+ cp /dtv/usb/sda1/SamyGO/samygo_telnetd /dtv/
Terminated
+ chmod +x /dtv/samygo_telnetd
Terminated
+ cp /dtv/usb/sda1/SamyGO/busybox+ /tmp/bin/
/dtv/samygo_telnetd 33
/dtv/usb/sda1/SamyGO/run1.sh: line 22: /dtv/samygo_telnetd: not found
Terminated
+ chmod +x /tmp/bin/busybox
Terminated
+ /tmp/bin/busybox --install -s /tmp/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 27: /tmp/bin/busybox: not found
+ sync
Terminated
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
Terminated
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
/dtv/usb/sda1/SamyGO/run1.sh: line 32: /tmp/bin/busybox: not found
Terminated
+ ln -s /dev/loop3 /tmp/loopnone
Terminated
+ sync
Terminated
+ [ -e /dtv/usb/sda1/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
/dtv/usb/sda1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox --install -s /mnt/bin
/dtv/usb/sda1/SamyGO/run1.sh: line 45: /tmp/bin/busybox: not found
+ sync
Terminated
+ rm /mnt/sam.log
Terminated
/dtv/usb/sda1/SamyGO/run1.sh: line 48: can't create /mnt/sam.log: Read-only file system
+ ls -la /mnt/*
/dtv/usb/sda1/SamyGO/run1.sh: line 49: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 50: can't create /mnt/sam.log: Read-only file system
+ echo Starting rcSGO from run1.sh
/dtv/usb/sda1/SamyGO/run1.sh: line 51: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sda1/SamyGO/run1.sh: line 52: can't create /mnt/sam.log: Read-only file system
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt
You do not have the required permissions to view the files attached to this post.
Top
Serge
SamyGO Project Donor
Posts: 31
Joined: Fri Oct 09, 2015 8:14 pm

Re: [!!!] Rooting H on latest firmwares

Post by Serge »

0dino wrote:
0dino wrote:hi there. im trying to root my UE48H6410 with 2770.0 firmware. im trying to follow the guide but i have some problems.

1st) "It seems that having both a recording device AND the rooting USB attached helps a lot.
To "create" a recording device: Shut down TV. Unplug usb with rooting data. Plug one of your free USB disks. Start TV and once it loads hit REC, it will ask if it can format the disk. Format and record something then shutdown TV, attach SECOND usb (the one with rooting data), start TV :)" when i plug the usb and hit rec i dont get message to format.

i have the same<its seems ok

2nd) "Menu->System->General->Quickly Power OFF Samsung - this option must be OFF
Menu->System->General->Samsung Instant ON - this option must be OFF i dont have those setting in my menu.
search well,may be in other folder

3nd) "Launch ONLY ONCE InstallSamyGO-H from SmartHub (if it doesn't appear reboot TV). Sometimes it is necessary to connect USB WHILE TV IS OFF!!! Remember to MAKE A PHOTO of rooting app log!!!" how to launch an app from USB?
lauch samsung app, and ther you see samygo icon ,push on it

hope u can help me.
none can help me?
Top

Post Reply

Return to “[H] Software”