SamyGO

mihd wrote:

Borygo77 wrote:..

Try replace 3.8.13 with my 3.8.13 folder.
You made a mistakes in some files when replacing vermagic.
My zip only for fw T-NT14UDEUC-1008.5

Will give it a try as soon as I get up tomorrow morning! In bed already
Thanks for your time mihd!

mihd wrote:

Borygo77 wrote:..

Try replace 3.8.13 with my 3.8.13 folder.
You made a mistakes in some files when replacing vermagic.
My zip only for fw T-NT14UDEUC-1008.5

Replaced and nothing changed with Telnet and SSH, password rejected so access denied.

The only thing changed now is TV is not powering off. Just freezing for 3 seconds and then rebooting.
Attached logs from 2 last reboots as size is different
edit; Overwriting kernel modules with my ones fixed problem with reboots. Can power off TV now

edit 2: I think freezing when powering off is more related to libToolsMenu. Disabled it now and its OK with your new kernels modules.
Telnet and ssh still not working but Putty behaving different (crashing) when trying to connect via telnet

Attached last logs from 08:22

Ehhh (facepalm), I explained everything and you still waste time, I am tired of this topic and pointless "tests"....

Well I think we can stop talking about it.

Just found out that there is problem with DTS passthrough on this firmware. Going to update one by one and test which one has sound fixed.

Borygo77 wrote:Well I think we can stop talking about it.

Just found out that there is problem with DTS passthrough on this firmware. Going to update one by one and test which one has sound fixed.

Ahh, good so welcome network root Goodbye skype refueled

I tell it from the beginning: too old fw...
Experience tells how very early firmwares are just beta, believe me

Well then sectroyer have to change his signature

DO NOT EVER INSTALL FIRMWARE UPGRADE

Borygo77 wrote:Well then sectroyer have to change his signature

DO NOT EVER INSTALL FIRMWARE UPGRADE

Nope, I should add I do NOT support hdmi shit

What do you mean ? I don't get you.
Didn't mention hdmi in this thread at all
I'm looking for way to play my 4K files stored on NAS with DTS-HD and get downsampled to at least DTS.
It's passingthrough Dolby but can't get DTS at all. All I'm getting at the moment from DTS is PCM :/

Did you ever get any DTS passthrough at all? If you had asked me, I'd have said it wasn't supported...
If you're talking about TV internal media player, DTS is supported but not "passthrough" (passthrough=HDMI).
And of course if you're using SPDIF/optical out, no "HD" audio will never "pass", max bitrate (1536kbps) doesn't allow it, you only get downsampled/downwards compatible version.