Page 85 of 146

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Thu Jun 04, 2015 11:42 am
by boggn
The TV freezes for any command after a few seconds after "boot".
This might be a known issue, so I thought I provide a log after I opened the menu and tried to set a few settings (they were reset yesterday after I cut power and powered it again to fast.)
OTN Support = OFF
Watchdog = OFF
TV: UE55H6270SS, T-MST14DEUC-1003.0

Please tell me if you need more than that.

Code: Select all

$ telnet 192.168.*.* 33
Trying 192.168.*.*...
Connected to 192.168.*.*.
Escape character is '^]'.
/bin/sh: can't access tty; job control turned off
VDLinux#> whoami
root
VDLinux#> dmesg
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Linux version 3.8.13 (gichoi@sp2) (gcc version 4.7.4 (VDLinux.v7a8.GA3.2013-10-11) ) #1 SMP PREEMPT Thu Feb 13 14:56:59 KST 2014
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: x14
hdma: start=b9c00000 aligned_start=b9c00000
hdma: size=100663296 vs 100663296 (overhead 0, 0)
hdma: added region 0 0xb9c00000 100663296

LX_MEM  = 0x21700000, 0xF400000
LX_MEM2 = 0xA0000000, 0x1FC00000
EMACaddr= 0x20000000
EMACmem= 0x100000
DRAM_LEN= 0x0
hdma: hdma_regions_reserve 1 defined
cma: CMA: reserved 96 MiB at b9c00000
hdma: dma_declare_contiguous[0] 100663296@0xb9c00000 = 0
Memory policy: ECC disabled, Data cache writealloc
L310 cache controller enabled
l2x0: 8 ways, CACHE_ID 0x000000c0, AUX_CTRL 0x32480000, Cache size: 1048576 B
On node 0 totalpages: 192512
  Normal zone: 1504 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 191008 pages, LIFO batch:31
PERCPU: Embedded 7 pages/cpu @c0c62000 s6304 r8192 d14176 u32768
pcpu-alloc: s6304 r8192 d14176 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 191008
Kernel command line: console=tty1,115200 root=/dev/mmcblk0p7 rootfstype=squashfs LX_MEM=0x21700000,0xF400000 LX_MEM2=0xA0000000,0x1FC00000 EMAC_MEM=0x20000000,0x100000 hdma=96M@2972M no_console_suspend Onboot : 1005.B ?????????? quiet 
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Memory: 244MB 508MB = 752MB total
Memory: 660080k/660080k available, 109968k reserved, 0K highmem
Page table translation value <default>:
    num_pgd:2048, num_pmd:1,  num_pte:512
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffdf000   ( 892 kB)
    vmalloc : 0xef800000 - 0xff000000   ( 248 MB)
    lowmem  : 0xc0000000 - 0xef000000   ( 752 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbe400000 - 0xbfe00000   (  26 MB)
      .text : 0xc0008000 - 0xc0330dec   (3236 kB)
      .init : 0xc0331000 - 0xc03518a0   ( 131 kB)
      .data : 0xc0352000 - 0xc0375eb0   ( 144 kB)
       .bss : 0xc0375eb0 - 0xc04526f4   ( 883 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
	Dump stacks of tasks blocking RCU-preempt GP.
NR_IRQS:256
Global Timer Frequency = 500 MHz
CPU Clock Frequency = 1000 MHz
fre = 500000000, mult= -2147483648, shift= 30
sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 8589ms
Console: colour dummy device 80x30
console [tty1] enabled
[VDLP] preset_lpj manual set to 4378624
Calibrating delay loop (skipped) preset value.. 2189.31 BogoMIPS (lpj=4378624)
pid_max: default: 32768 minimum: 301
NetSec Security Framework initialization
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
_Secondary_startup physical address = 0x21996444
Setting up static identity map for 0x2199e398 - 0x2199e3f0
CPU1: Booted secondary processor
[VDLP] preset_lpj manual set to 4378624
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
[VDLP] preset_lpj manual set to 4378624
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
[VDLP] preset_lpj manual set to 4378624
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (8757.24 BogoMIPS).
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
bio: create slab <bio-0> at 0
SCSI subsystem initialized
Switching to clocksource timer1
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
LMK: low_wmark is 32, high_wmark is 1311
LMK: lowmem minfree param changed to:  32, 32, 991, 1311,
LMK: low_wmark is 32, high_wmark is 1311
LMK: lowmem minfree param changed to:  32, 32, 991, 1311,
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 1481
io scheduler noop registered (default)
Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xfd201300 (irq = 192) is a 16550
serial8250: ttyS1 at I/O 0xfd220c00 (irq = 231) is a 16550
serial8250: ttyS2 at I/O 0xfd220d00 (irq = 242) is a 16550
serial8250: ttyS3 at I/O 0xfd220c80 (irq = 232) is a 16550
serial8250: ttyS4 at I/O 0xfd201280 (irq = 225) is a 16550
serial8250: ttyS5 at I/O 0xfd220d80 (irq = 216) is a 16550
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
zram: Creating 4 devices ...
vdashmem: initialized
hdma: hdma_dev_init
hdma: testing region 0 [0xb9c00000, 0xbfc00000]
hdma: zone Normal      [0x21700000, 0xbfc00000]
hdma hdma0: device_create e8b65100
hdma hdma0: region added size=100663296 start=0xb9c00000
hdma: VDLinux HDMA msg, HDMA_IS_MIGRATING.
Normal per-cpu:
CPU    0: hi:  186, btch:  31 usd:  55
CPU    1: hi:  186, btch:  31 usd:  57
CPU    2: hi:  186, btch:  31 usd:  28
CPU    3: hi:  186, btch:  31 usd:  58
active_anon:0 inactive_anon:0 isolated_anon:0
 active_file:0 inactive_file:0 isolated_file:0
 unevictable:0 dirty:0 writeback:0 unstable:0
 free:188611 slab_reclaimable:10 slab_unreclaimable:277
 mapped:0 shmem:0 pagetables:0 bounce:0
 free_cma:24576
Normal free:754444kB min:3496kB low:4368kB high:5244kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:764032kB managed:660080kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:40kB slab_unreclaimable:1108kB kernel_stack:248kB pagetables:0kB unstable:0kB bounce:0kB free_cma:98304kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
Normal: 5*4kB (EM) 4*8kB (UM) 4*16kB (UEM) 1*32kB (M) 6*64kB (UEM) 3*128kB (UM) 3*256kB (UM) 4*512kB (EM) 5*1024kB (EM) 4*2048kB (EM) 180*4096kB (MRC) = 754324kB
0 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 0kB
Total swap = 0kB
VDLinux msg, zram info:
zram0: OrigDataSize 0 kB ComprDataSize 0 kB MemUsedTotal 0 kB
zram1: OrigDataSize 0 kB ComprDataSize 0 kB MemUsedTotal 0 kB
zram2: OrigDataSize 0 kB ComprDataSize 0 kB MemUsedTotal 0 kB
zram3: OrigDataSize 0 kB ComprDataSize 0 kB MemUsedTotal 0 kB
[ pid ]   uid  tgid total_vm      rss  rss_max   swap cpu oom_adj priority name
* Sum of rss    :      0 (kB)
* Sum of maxrss :      0 (kB)
* Sum of swap   :      0 (kB)

* Sum of pss :      0 (kB)
hdma: region_alloc all good 24576@c0b8b000(0xb9c00000)
hdma: VDLinux HDMA msg, HDMA_IS_OFF on region 0
Normal per-cpu:
CPU    0: hi:  186, btch:  31 usd:   0
CPU    1: hi:  186, btch:  31 usd:   0
CPU    2: hi:  186, btch:  31 usd:   0
CPU    3: hi:  186, btch:  31 usd:   0
active_anon:0 inactive_anon:0 isolated_anon:0
 active_file:0 inactive_file:0 isolated_file:0
 unevictable:0 dirty:0 writeback:0 unstable:0
 free:164165 slab_reclaimable:10 slab_unreclaimable:277
 mapped:0 shmem:0 pagetables:0 bounce:0
 free_cma:0
Normal free:656660kB min:3496kB low:4368kB high:5244kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:764032kB managed:660080kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:40kB slab_unreclaimable:1108kB kernel_stack:248kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
Normal: 8*4kB (UEM) 12*8kB (UEM) 10*16kB (UEM) 6*32kB (UEM) 11*64kB (UEM) 2*128kB (M) 2*256kB (M) 5*512kB (UEM) 5*1024kB (EM) 4*2048kB (EM) 156*4096kB (MR) = 656800kB
0 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 0kB
Total swap = 0kB
VDLinux msg, zram info:
zram0: OrigDataSize 0 kB ComprDataSize 0 kB MemUsedTotal 0 kB
zram1: OrigDataSize 0 kB ComprDataSize 0 kB MemUsedTotal 0 kB
zram2: OrigDataSize 0 kB ComprDataSize 0 kB MemUsedTotal 0 kB
zram3: OrigDataSize 0 kB ComprDataSize 0 kB MemUsedTotal 0 kB
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (11849 buckets, 47396 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
================================================================================
 SAMSUNG VDLP Kernel
 Version : 0102, product
 Applied Last Patch Number : 1026, DTV, X14, product, DEU_BRANCH
================================================================================
mmc0: BKOPS_EN bit is not set
mmc0: new high speed DDR MMC card at address 0001
mmcblk0: mmc0:0001 P1XXXX 3.57 GiB 
mmcblk0boot0: mmc0:0001 P1XXXX partition 1 2.00 MiB
mmcblk0boot1: mmc0:0001 P1XXXX partition 2 2.00 MiB
mmcblk0rpmb: mmc0:0001 P1XXXX partition 3 128 KiB
 mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 >
 mmcblk0boot1: unknown partition table
 mmcblk0boot0: unknown partition table
VFS: Mounted root (squashfs filesystem) readonly on device 179:7.
Freeing init memory: 128K
LMK: low_wmark is 32, high_wmark is 1311
LMK: lowmem minfree param changed to:  32, 32, 991, 1311,
LMK: low_wmark is 32, high_wmark is 1311
LMK: lowmem minfree param changed to:  32, 32, 991, 1311,
set Writable partition 13 
set Writable partition 14 
set Writable partition 15 
set Writable partition 17 

[SABSP] Write Enabled!!!!!!!
vdfs.
[VDFS] version is "vdfs.0250-2014_02_05"[VDFS] git branch is "vdfs.0250-2014_02_05"
[VDFS] git revhash "20f9c876c83aed956a0c856a58519584ee3cd1f8"[VDFS] mounting mmcblk0p16
[VDFS] mkfs git branch is "vdfs.0247-2014_01_20"
[VDFS] mkfs git revhash "cfa9e8500146d15345ca698937a3d9327316ea22"
[VDFS] mounted 0 times
vdfs.
[VDFS] version is "vdfs.0250-2014_02_05"[VDFS] git branch is "vdfs.0250-2014_02_05"
[VDFS] git revhash "20f9c876c83aed956a0c856a58519584ee3cd1f8"[VDFS] mounting loop0
[VDFS] mkfs git branch is "vdfs.0247-2014_01_20"
[VDFS] mkfs git revhash "cfa9e8500146d15345ca698937a3d9327316ea22"
[VDFS] mounted 0 times

 === MHAL_AUDIO_DspInfo_Init Virtual addr 1(0xefa36000) == 

 === MHAL_AUDIO_DspInfo_Init Virtual addr 2(0xefa3800c) == 
PreInit mod ld
vdfs.
[VDFS] version is "vdfs.0250-2014_02_05"[VDFS] git branch is "vdfs.0250-2014_02_05"
[VDFS] git revhash "20f9c876c83aed956a0c856a58519584ee3cd1f8"[VDFS] mounting mmcblk0p15
[VDFS] mkfs git branch is "vdfs.0247-2014_01_20"
[VDFS] mkfs git revhash "cfa9e8500146d15345ca698937a3d9327316ea22"
[VDFS] mounted 746 times
vdfs.
[VDFS] version is "vdfs.0250-2014_02_05"[VDFS] git branch is "vdfs.0250-2014_02_05"
[VDFS] git revhash "20f9c876c83aed956a0c856a58519584ee3cd1f8"[VDFS] mounting mmcblk0p13
[VDFS] mkfs git branch is "vdfs.0247-2014_01_20"
[VDFS] mkfs git revhash "cfa9e8500146d15345ca698937a3d9327316ea22"
[VDFS] mounted 743 times
vdfs.
[VDFS] version is "vdfs.0250-2014_02_05"[VDFS] git branch is "vdfs.0250-2014_02_05"
[VDFS] git revhash "20f9c876c83aed956a0c856a58519584ee3cd1f8"[VDFS] mounting mmcblk0p14
[VDFS] mkfs git branch is "vdfs.0247-2014_01_20"
[VDFS] mkfs git revhash "cfa9e8500146d15345ca698937a3d9327316ea22"
[VDFS] mounted 743 times
[IIC_Debug] No Ack 

[IIC_Debug] Write result fail!!!  
[IIC_Debug] Channel:1, SlaveIdIIC:0xCE 
[IIC_Debug] No Ack 

[IIC_Debug] Write result fail!!!  
[IIC_Debug] Channel:1, SlaveIdIIC:0xCA 
[IIC_Debug] No Ack 

[IIC_Debug] Write result fail!!!  
[IIC_Debug] Channel:1, SlaveIdIIC:0x14 
[IIC_Debug] No Ack 

[IIC_Debug] Write result fail!!!  
[IIC_Debug] Channel:1, SlaveIdIIC:0x80 
[IIC_Debug] No Ack 

[IIC_Debug] Write result fail!!!  
[IIC_Debug] Channel:1, SlaveIdIIC:0x94 

[SABSP] Write protected!!!!!!!
vdfs.
[VDFS] version is "vdfs.0250-2014_02_05"[VDFS] git branch is "vdfs.0250-2014_02_05"
[VDFS] git revhash "20f9c876c83aed956a0c856a58519584ee3cd1f8"[VDFS] mounting mmcblk0p17
[VDFS] mkfs git branch is "vdfs.0247-2014_01_20"
[VDFS] mkfs git revhash "cfa9e8500146d15345ca698937a3d9327316ea22"
************* UART1 Request IRQ *************
[VDFS] mounted 748 times
===================================
FCR c1
===================================
(insmod) UART16550 DLAB : DLL accessible addr=0h, data=21h
(insmod) UART16550 try to set UART_DLL = 21h, but fixed to c8h
UART_IER is being modified by value:0x3
Update UART divisor:0x321
micom_module_init call
micom_module mod ld
 Module version: 0029 - debug.
tzdrv mod ld
===================================
FCR c1
===================================
(t_LogoThread) UART16550 DLAB : DLL accessible addr=0h, data=c8h
UART_IER is being modified by value:0x0
Update UART divisor:0xc8
Mali DRM initialize, driver name: mali_drm, version 2.1
[drm] Initialized mali_drm 2.1.1 20130508 on minor 0
Mali DRM initialize, driver name: mali_drm, version 2.1
[drm] Initialized mali_drm 2.1.1 20130508 on minor 1
UMP<2>: Inserting UMP device driver. Compiled: Mar 11 2014, time: 08:13:43
UMP: UMP device driver  loaded
Inserting UMP lock device driver. Compiled: Mar 11 2014, time: 08:13:44
UMP lock device driver loaded
Mali<2>: Inserting Mali v20 device driver. 
Mali<2>: Compiled: Mar 11 2014, time: 08:13:47.
Mali<2>: Driver revision: 
Mali<2>: mali_module_init() registering device
Mali<2>: mali_module_init() registering driver
Mali<2>: mali_probe(): Called for platform device mali-utgard
Mali<2>: Memory system initializing
Mali<2>: Using device defined memory settings (dedicated: 0x00000000@0x00000000, shared: 0x10000000)
Mali<2>: Mali OS memory allocator created with max allocation size of 0x10000000 bytes, cpu_usage_adjust 0x20000000
Mali<2>: Using device defined frame buffer settings (0xF0000000@0x00000000)
Mali<2>: Memory Validator installed for Mali physical address base=0x00000000, size=0xF0000000
Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
Mali<2>: Mali PP: Base address of PP core: 0xfd348000
Mali<2>: Found Mali GPU Mali-450 MP r0p0
Mali<2>: Mali DLBU: Initializing
Mali<2>: Mali L2 cache: Creating Mali L2 cache: Mali_L2
Mali<2>: Mali L2 cache: Creating Mali L2 cache: Mali_L2
Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU
Mali<2>: Mali GP: Creating Mali GP core: Mali_GP
Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU
Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
Mali<2>: Mali PP: Base address of PP core: 0xfd348000
Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU
Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1
Mali<2>: Mali PP: Base address of PP core: 0xfd34a000
Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP2_MMU
Mali<2>: Mali PP: Creating Mali PP core: Mali_PP2
Mali<2>: Mali PP: Base address of PP core: 0xfd34c000
Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP3_MMU
Mali<2>: Mali PP: Creating Mali PP core: Mali_PP3
Mali<2>: Mali PP: Base address of PP core: 0xfd34e000
Mali<2>: Starting new virtual group for MMU PP broadcast core Mali_PP_MMU_Broadcast
Mali<2>: Mali DLBU: Creating Mali dynamic load balancing unit: Mali_DLBU
Mali<2>: Mali Broadcast unit: Creating Mali Broadcast unit: Mali_Broadcast
Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP_MMU_Broadcast
Mali<2>: Mali PP: Creating Mali PP core: Mali_PP_Broadcast
Mali<2>: Mali PP: Base address of PP core: 0xfd366000
Mali<2>: 4+0 PP cores initialized
Mali<2>: Mali GPU Utilization: Utilization handler installed with interval 1000
Mali<2>: mali_probe(): Successfully initialized driver for platform device mali-utgard
Mali: Mali device driver loaded
samsung_mali mod ld
sfd mod ld
tddrvcore: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
[tddrv_core] init start
[tddrv_core] tddrv_audioamp_init call
[tddrv_core] tddrv_ci_init call
[tddrv_core] tddrv_tcon_init call
[tddrv_core] tddrv_tuner_init call
[tddrv_core] tddrv_videoenhancer_init call
[tddrv_core] init end
tddrvcore mod ld
binder: 111:111 refcount change on invalid ref 0
tddrv load call [Start]
tddrv Backend load call
tddrv Audio load Call
tddrv CI load call
tddrv hdmi load call
tddrv Tcon load call
tddrv Tuner load call
tddrv VideoEnhancer load call
tddrv load call [End]
tddrv mod ld
GOP driver inits
REG_ARM_BASE 0xFD200000
mstar_fb_init 
init GA pool  
[mstar_gfx_mmap_init] (332)[mstar_gfx_mmap_init] (335)[mstar_gfx_mmap_init] (341)[mstar_gfx_mmap_init] Pool: GOP_0 bus_addr:3be04000 Size:400000 PA_Addr:1be04000 pool_base:0
[mstar_gfx_mmap_init] Pool: GOP_0 bus_addr:3be04000 Size:400000 PA_Addr:1be04000 pool_base:f1800000
[MDrv_GOP_CreateMemoryPool] Pool: GOP_0 Size:400000 Addr:f1800000 s32Id:0
[mstar_gfx_mmap_init] Pool: GOP_0 bus_addr:3be04000 Size:400000 PA_Addr:1be04000 pool_base:f1800000
[mstar_gfx_mmap_init] Pool: GOP_0 bus_addr:30b00000 Size:3c00000 PA_Addr:10b00000 pool_base:f2000000
[MDrv_GOP_CreateMemoryPool] Pool: GOP_1 Size:3c00000 Addr:f2000000 s32Id:1
[mstar_gfx_mmap_init] Pool: GOP_0 bus_addr:30b00000 Size:3c00000 PA_Addr:10b00000 pool_base:f2000000
init GA pool done 
_fb_phy_addr = 0x1c207000 
ioremap addr = 0x3c207000
fbdev init: screen_base = 0xf6000000
fbdev init: w=800, h=1080, bpx=32, fix.smem_start=0x1c207000 fix.smem_len=0x00697800

 ==== 11023 attach kernel filme driver ====
samsung_mstar mod ld
mst_str mod ld
usb_common mod ld
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore mod ld
Mstar-ehci-2 H.W init
Titania3_series_start_ehc start
Mstar-ehci-2 Mstar-ehci-2.1: Mstar EHCI
creating file 'devices'creating file '001'
Mstar-ehci-2 Mstar-ehci-2.1: new USB bus registered, assigned bus number 1
Mstar-ehci-2 Mstar-ehci-2.1: irq 226, io mem 0xfd201a00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
creating file '001'
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mstar-ehci-1 H.W init
Titania3_series_start_ehc start
Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
creating file '002'
Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 2
Mstar-ehci-1 Mstar-ehci-1.0: irq 199, io mem 0xfd204800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
creating file '001'Mstar-ehci-3 H.W init
Titania3_series_start_ehc start
Mstar-ehci-3 Mstar-ehci-3.2: Mstar EHCI
creating file '003'
Mstar-ehci-3 Mstar-ehci-3.2: new USB bus registered, assigned bus number 3
Mstar-ehci-3 Mstar-ehci-3.2: irq 229, io mem 0xfd227200
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
creating file '001'Mstar-ehci-4 H.W init
Titania3_series_start_ehc start
Mstar-ehci-4 Mstar-ehci-4.3: Mstar EHCI
creating file '004'
Mstar-ehci-4 Mstar-ehci-4.3: new USB bus registered, assigned bus number 4
Mstar-ehci-4 Mstar-ehci-4.3: irq 217, io mem 0xfd244c00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
creating file '001'
ehci_hcd mod ld
Mstar-xhci H.W init
Mstar_xhc_init version:20140115
Mstar-xhci-1 Mstar-xhci-1.0: Mstar xHCI Host Controller
creating file '005'
Mstar-xhci-1 Mstar-xhci-1.0: new USB bus registered, assigned bus number 5
Mstar-xhci-1 Mstar-xhci-1.0: irq 194, io mem 0xfd320000
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
creating file '001'
Mstar-xhci-1 Mstar-xhci-1.0: Mstar xHCI Host Controller
creating file '006'
Mstar-xhci-1 Mstar-xhci-1.0: new USB bus registered, assigned bus number 6
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
creating file '001'
xhci_hcd mod ld
BTSBC btsbc_module_init: module inserted
btsbc mod ld
BTSEC btsec_module_init: module inserted
btsec mod ld
BTPCM btpcm_module_init: module inserted
BTPCM btpcm_ibiza_init: The Linux time reference (HZ) is 250
BTPCM btpcm_hrtimer_init: HR Timer resolution=1
BTPCM btpcm_ibiza_init: /proc/driver/btpcm-ibiza entry created
BTPCM btpcm_ibiza_init: ibiza_pcm_buf_left_phy_addr=0x33420000
BTPCM btpcm_ibiza_init: ibiza_pcm_buf_size=86016
BTPCM btpcm_ibiza_init: ibiza_pcm_left_write_phy_addr=0x334f0b14
BTPCM btpcm_ibiza_init: ibiza_enable_mark_addr=0x334f0b66
btpcm mod ld
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2487000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5875000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211 mod ld
usbcore: registered new interface driver btusb
btusb mod ld
usbcore: registered new interface driver ath6kl_usb
ath6kl_usb mod ld
==0124==> hub_port_init 1 
Plug in USB Port2
usb 1-1: new full speed USB device number 2 using Mstar-ehci-2
[IIC_Debug] Read result fail!!!  
[IIC_Debug] Channel:1, SlaveIdIIC:0xCE 
[IIC_Debug] Read result fail!!!  
[IIC_Debug] Channel:1, SlaveIdIIC:0xCA 
[IIC_Debug] Read result fail!!!  
[IIC_Debug] Channel:1, SlaveIdIIC:0x14 
[IIC_Debug] Byte:[0], Addr :0x0 
[IIC_Debug] Read result fail!!!  
[IIC_Debug] Channel:1, SlaveIdIIC:0x94 
[IIC_Debug] Byte:[0], Addr :0x0 
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
creating file '002'==> hub_port_init_20140115 1 
==> Reset port 1
ioctl: GET_PNL_INIT_STATUS
LMK: The command (0x20) is depricated!
UMP<2>: New session opened
UMP<2>: Using OS memory backend, allocation limit: 125829120
UMP<2>: Session closed
UMP<2>: New session opened
[mstar_fb_ioctl] Pool_id: 0
[mstar_fb_ioctl] Pool_id: 1
usb 5-1: new high-speed USB device number 2 using Mstar-xhci-1
QCA Wi-Fi Driver version : (5.0.0.99_0214), 2014(PostRC2-Update) dongle_type=0
6ath6kl: 3VAP/1, P2P enable, concurrent on , with dedicate p2p-device, multi-channel-concurrent enable, p2p-compat enable (ignore p2p_dedicate), sta-p2p-ie removed
6ath6kl: target bootstrap: 0x00000a00
ath6kl: Get firmware ath6k/AR6004/hw3.0/bdata.bin !!
ath6kl: Get firmware ath6k/AR6004/hw3.0/fw.ram.bin !!
6ath6kl: target's subtype is 0x3, HT20-only 2SS Dual-band
3ath6kl: wmi fail, cmd_id 0x29 ep_id 0 if_idx 0
6ath6kl: Create HTC cookie, type 1 num 440
6ath6kl: Create HTC cookie, type 2 num 66
6ath6kl: P2P flowctrl enabled
6ath6kl: RX aggregation drop enabled
6ath6kl: Using driver's regdb.
6ath6kl: Firmware recovery mode cold
===================================
FCR c1
===================================
===================================
FCR c1
===================================
===================================
FCR c1
===================================
===================================
FCR c1
===================================
UMP<2>: New session opened
[tddrv_done] init start
tddrv thread_resume load call
[tddrv_done] init end
tddrvdone mod ld
LMK: The command (0x10) is depricated!
6ath6kl: ar6004 hw 3.0 usb fw 5.0.0.101
6ath6kl:  skb copy disable
6ath6kl: Create dedicated p2p interface
ath6kl: Create dedicated p2p interface completed.
Adding 102396k swap on /dev/zram0.  Priority:-1 extents:1 across:102396k SS
creating file '002'
[suspend_tuner] ioctl Test cmd : 12  arg : 9e838d78 [suspend_tuner] ioctl Test cmd : 16  arg : 9e838d80 
[suspend_tuner] ioctl Test cmd : 10  arg : 9e838d70 ==0124==> hub_port_init 1 
Plug in USB Port4
usb 4-1: new high speed USB device number 2 using Mstar-ehci-4
creating file '002'==0124==> hub_port_init 1 
usb 1-1.1: new full speed USB device number 3 using Mstar-ehci-2
UMP<2>: New session opened
UMP<2>: New session opened
creating file '003'==0124==> hub_port_init 2 
usb 1-1.2: new full speed USB device number 4 using Mstar-ehci-2
creating file '004'==0124==> hub_port_init 3 
hid mod ld
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid mod ld
evdev mod ld
usb 1-1.3: new full speed USB device number 5 using Mstar-ehci-2
mousedev: PS/2 mouse device common for all mice
mousedev mod ld
input: HID 0a5c:4502 as /devices/platform/Mstar-ehci-2.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
hid-generic 0003:0A5C:4502.0001: input: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-mstar-1.1/input0
input: HID 0a5c:4503 as /devices/platform/Mstar-ehci-2.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
hid-generic 0003:0A5C:4503.0002: input: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-mstar-1.2/input0
hid_generic mod ld
hid_microsoft mod ld
hid_apple mod ld
hid_chicony mod ld
UMPLOCK: OPEN SESSION (1 references)
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
UMPLOCK: OPEN SESSION (2 references)
creating file '005'
Mali<2>: Session started
BTHID bthid_init: ++
BTHID bthid_init: --
bthid mod ld
UMPLOCK: OPEN SESSION (3 references)
Mali<2>: Session started
LMK: The command (0x40086c02) is unknown!




#################################
[ERROR(-13)][DAC:generic(NoSKIP)][manager.img(file:8000)][dev=mmcblk0p16][rw-][rw-][r--][U(0)G(0)]<->[TH(mount:535)PTH(sh)][U(r[1010]:s[1010]:e[1010]:fs[1010])G(r[1010]:s[1010]:e[1010]:fs[1010])][rw-]
###################################







#################################
[ERROR(-13)][DAC:inode(NoSKIP)][manager.img(file:8000)][dev=mmcblk0p16][rw-][rw-][r--][U(0)G(0)]<->[TH(mount:535)PTH(sh)][U(r[1010]:s[1010]:e[1010]:fs[1010])G(r[1010]:s[1010]:e[1010]:fs[1010])][rw-]
###################################



eth: Module loaded.
[ PHY Addr ] ==> :0
alloRAM_PA_BASE= 0x20000000  alloRAM_SIZE= 0x100000
alloRAM_VA_BASE= 0xF8A00000  alloRAM_SIZE= 0x100000
RBQP_BASE = 20004000
mdrv_emac mod ld
Tuxera NTFS driver 3013.11.11.1 [Flags: R/W MODULE].
tntfs mod ld
exFAT: Core Version 1.1.11p1(13-FEB-2013)
exfat_core mod ld
exFAT: FS Version 1.1.11p1(13-FEB-2013)
exfat_fs mod ld
Initializing USB Mass Storage driver...
scsi0 : usb-storage 4-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb_storage mod ld
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
mmcblk0p17: Meta: 30076KB     Data: 145720KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6008KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6012KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6012KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6012KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6012KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume




#########################################
[ERROR][CAP:NoSKIP][CAP(6)][TH(sync:1092)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(7)][TH(sync:1092)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(6)][TH(busybox:1098)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(7)][TH(busybox:1098)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(6)][TH(mkdir:1099)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(7)][TH(mkdir:1099)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(6)][TH(cp:1104)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(7)][TH(cp:1104)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(6)][TH(chmod:1108)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(7)][TH(chmod:1108)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(6)][TH(cat:1109)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(7)][TH(cat:1109)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(6)][TH(sync:1113)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(7)][TH(sync:1113)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(6)][TH(sleep:1120)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(7)][TH(sleep:1120)PTH(sh)][U(1010)G(1010)]
###########################################



##### send signal SIG : 12, getroot(1122)->getroot(1129) __send_signal
##### send signal SIG : 12, getroot(1122)->getroot(1140) __send_signal
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
mmcblk0p16: Meta: 42268KB     Data: 924372KB
There are 0 tiny files at volume
mmcblk0p15: Meta: 4244KB     Data: 6024KB
There are 0 tiny files at volume
[CIP_KERNEL] /bin/authuld can read  (after=0)
[CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<< 
[CIP_KERNEL] (0)th waiting.
[CIP_KERNEL] 

  execute authuld





#########################################
[ERROR][CAP:NoSKIP][CAP(6)][TH(sleep:1245)PTH(sh)][U(1010)G(1010)]
###########################################







#########################################
[ERROR][CAP:NoSKIP][CAP(7)][TH(sleep:1245)PTH(sh)][U(1010)G(1010)]
###########################################



##### send signal SIG : 12, getroot(1247)->getroot(1253) __send_signal
[CIP_KERNEL] (1)th waiting.
[CIP_KERNEL] (2)th waiting.
vdfs.
[VDFS] version is "vdfs.0250-2014_02_05"[VDFS] git branch is "vdfs.0250-2014_02_05"
[VDFS] git revhash "20f9c876c83aed956a0c856a58519584ee3cd1f8"[VDFS] mounting loop3
vdfs-ERROR:617:emmcfs_verify_sb: SB: bad signature - , expected - VDFS
 
tntfs: fail_safe is enabled
[EXFAT] ===== ffsMountVol =====
6ath6kl: frame len is too short or too long
[CIP_KERNEL] (3)th waiting.
[CIP_KERNEL] (4)th waiting.
[CIP_KERNEL] (5)th waiting.
[CIP_KERNEL] (6)th waiting.
[CIP_KERNEL] (7)th waiting.
[CIP_KERNEL] (8)th waiting.
[CIP_KERNEL] (9)th waiting.
[CIP_KERNEL] (10)th waiting.
[CIP_KERNEL] (11)th waiting.
[CIP_KERNEL] (12)th waiting.
[CIP_KERNEL] (13)th waiting.
[CIP_KERNEL] (14)th waiting.
[CIP_KERNEL] (15)th waiting.
6ath6kl: frame len is too short or too long
[CIP_KERNEL] (16)th waiting.
[CIP_KERNEL] (17)th waiting.
[CIP_KERNEL] (18)th waiting.
[CIP_KERNEL] (19)th waiting.
[CIP_KERNEL] (20)th waiting.
[CIP_KERNEL] (21)th waiting.
[CIP_KERNEL] (22)th waiting.
[CIP_KERNEL] (23)th waiting.
[CIP_KERNEL] (24)th waiting.
[CIP_KERNEL] (25)th waiting.
[CIP_KERNEL] (26)th waiting.
[CIP_KERNEL] (27)th waiting.
[CIP_KERNEL] (28)th waiting.
[CIP_KERNEL] (29)th waiting.
[CIP_KERNEL] (30)th waiting.
[CIP_KERNEL] (31)th waiting.
[CIP_KERNEL] (32)th waiting.
##### deliver signal SIG : 9, authuld(1338) get_signal_to_deliver
[CIP_KERNEL] authentication success!!!
[CIP_KERNEL] Success!! Authuld is successfully completed.

[SABSP] Write Enabled!!!!!!!

[SABSP] Write Enabled!!!!!!!

[SABSP] Write protected!!!!!!!

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Thu Jun 04, 2015 12:26 pm
by sectroyer
yeah for instance your TV model :) Firmware version, etc. :)

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Thu Jun 04, 2015 12:54 pm
by boggn
Sorry, forgot that part :D
TV: UE55H6270SS
Firmware: T-MST14DEUC-1003.0
samyext4-version from 29/03/2015

Something else?

The weird thing is, that just now it didn't freeze while I was in the settings menu.
I had to cut power again because it hang. After about an hour I powered it again.
It might be important that the HDMI signal was already there (I didn't shut down my android device and AV Receiver).

Anynet (CEC) is enabled, I use it with my AV Receiver.
I also think that ScreenMirroring/WiDi/Miracast (last two names are the official technology names) might work now because the menu didn't freeze. But I don't want to risk it.

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Thu Jun 04, 2015 1:11 pm
by sectroyer
If unplug usb (while TV is off) and then power it on does it work correctly ?

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Thu Jun 04, 2015 3:35 pm
by boggn
Nope, TV is frozen.
After I opened the "tools" menu 2 times (exited them with "exit"), the TV does not react anymore to any command.
No reaction to anything except volume change (because of CEC my AV Receiver reacts to it).
I tried that two times (power cut, wait about 30 seconds, powered the TV again and test).

edit: telnet does not work anymore (without usb I guess), but this should be expected.

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Thu Jun 04, 2015 4:01 pm
by sectroyer
well it's strange. I think you might try upgrading to some newer version. For example T-MST14DEUC-1033.0 is pretty stable :) Just remember to disable OTN Support ASAP after update :)

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Thu Jun 04, 2015 4:07 pm
by boggn
OK, I have to find a place where I can download this firmware-version.

The good thing is that my router blocks internet for my TV. So any unwanted update cannot happen and I have enough time to make any changes.

edit: I have looked around... no idea where I can get this firmware-version. :(

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Fri Jun 05, 2015 8:24 am
by miazza
boggn wrote:OK, I have to find a place where I can download this firmware-version.

The good thing is that my router blocks internet for my TV. So any unwanted update cannot happen and I have enough time to make any changes.

edit: I have looked around... no idea where I can get this firmware-version. :(
I guess you will face also another issue: how can you upgrade from USB if TV crashes after boot ?
Your only chance is to activate OTN and free internet access to TV and wait that upgrade is done silently from Samsung while the TV is OFF.

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Fri Jun 05, 2015 9:00 am
by zoelechat
miazza wrote:I guess you will face also another issue: how can you upgrade from USB if TV crashes after boot ?
Your only chance is to activate OTN and free internet access to TV and wait that upgrade is done silently from Samsung while the TV is OFF.
Yes but no :)
Not only latest MST14DEUC is non-rootable, but even if upgrade is "silent", TV goes ON though so will surely crash too in such state.
Better try some factory reset / smarthub reset (or region change twice), then see if it still crashes, and then if it's possible to find and install ANY fw version till 2130.0 (latest rootable) through USB.

Re: [!!!] Rooting H series (updated 29/03/2015)

Posted: Fri Jun 05, 2015 10:58 am
by boggn
miazza wrote:I guess you will face also another issue: how can you upgrade from USB if TV crashes after boot ?
Your only chance is to activate OTN and free internet access to TV and wait that upgrade is done silently from Samsung while the TV is OFF.
That is not a problem.
I have done a factory reset before and the TV acted normal after that. (No Skype after a factory reset.)
It only happens if I root the TV.

I still don't know, where I get the firmware...
Many sites are refering to mobile phone firmware, not TV.
I gave up the search for now and will look again into it if I am really annoyed of this issue.