UE60H6270 Service Menu Panel Type Default

Here is information about customize your H series firmware.
Post Reply

corruption
Posts: 4
Joined: Wed Feb 11, 2015 10:38 pm

UE60H6270 Service Menu Panel Type Default

Post by corruption »

Hi,

i changed my panel type in service menu...

whats the default value for the UE60H6270?

Someone maybe has photos for all default Settings for this device?

Kind regards,

corruption
boggn
SamyGO Project Donor
Posts: 27
Joined: Thu Feb 26, 2015 6:46 pm

Re: UE60H6270 Service Menu Panel Type Default

Post by boggn »

I have got an UE55H6270.
Where did you change what exactly?
Maybe my setting can help.
corruption
Posts: 4
Joined: Wed Feb 11, 2015 10:38 pm

Re: UE60H6270 Service Menu Panel Type Default

Post by corruption »

Hi,

open the service menu (With this key combination: Info - Menu - Mute - Power) its in the option menu. "Option ==> Type"

DON'T CHANGE ANYTHINK WITHOUT PHOTOS THERE! :) (i learned this on the hard way,,...)

Thanks!
boggn
SamyGO Project Donor
Posts: 27
Joined: Thu Feb 26, 2015 6:46 pm

Re: UE60H6270 Service Menu Panel Type Default

Post by boggn »

My Setting is: 55A1AF0V
It seems to be a null, not o. (Compared to the NONE in "Ch Table".)
TVexpert
Posts: 5
Joined: Fri Mar 13, 2015 11:13 am

Re: UE60H6270 Service Menu Panel Type Default

Post by TVexpert »

This should help if you're keen to mess with inside TV
http://wiki.samygo.tv/index.php5/UnBric ... PROM_Reset
corruption
Posts: 4
Joined: Wed Feb 11, 2015 10:38 pm

Re: UE60H6270 Service Menu Panel Type Default

Post by corruption »

I think it doesnt help. This Thread is only about 1 special setting in the service menu, that was accidentally switched without taking a photo.
How can your link help on this problem? :)
TVexpert
Posts: 5
Joined: Fri Mar 13, 2015 11:13 am

Re: UE60H6270 Service Menu Panel Type Default

Post by TVexpert »

Did you try it? Cause all adjustment set up is, as far as i know, held within EEPROM.
corruption
Posts: 4
Joined: Wed Feb 11, 2015 10:38 pm

Re: UE60H6270 Service Menu Panel Type Default

Post by corruption »

Well, i have a picture and can still reach the service-menu (so the panel still work!), my only problem is, that i do not know if my settings are correct (factory default). So i do not need the "hard way". :) But yes, if you cant do anything because you broke up your TV with the service menu, then your link is helpful.

Post Reply

Return to “[H] Firmware”