UE65H6470 Firmware Problems (UEErH6470 after downgrade)

Here is information about customize your H series firmware.

RuckZuck
Posts: 12
Joined: Sat Mar 24, 2018 2:13 am

Re: UE65H6470 Firmware Problems (UEErH6470 after downgrade)

Post by RuckZuck » Fri Apr 26, 2019 9:22 pm

@zoelechat: do you already tested this (also on another H6470 model) ?
I think about what can be destroyed by this "wrong" choosen panel. May be only the panel, may be also the T-CON Board!?

@crazyrr: You can change it directly in service-menu. No need to do it directly with libFactory!?
Try it ;-)

zoelechat
Official SamyGO Developer
Posts: 8369
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: UE65H6470 Firmware Problems (UEErH6470 after downgrade)

Post by zoelechat » Fri Apr 26, 2019 9:29 pm

RuckZuck wrote:
Fri Apr 26, 2019 9:22 pm
@zoelechat: do you already tested this (also on another H6470 model) ?
I own only E and K :)
RuckZuck wrote:
Fri Apr 26, 2019 9:22 pm
I think about what can be destroyed by this "wrong" choosen panel. May be only the panel, may be also the T-CON Board!?
Nah nothing, at worst you'll get funny colors or upside down picture. No need to try all anyway, just try to be close and consistent.
crazyrr wrote:
Fri Apr 26, 2019 9:08 pm
Did somebody try already to change the type with libFactory?
Should work, but only if you know (and risk) the magic to set unallowed items :ugeek:
I do NOT receive any PM. Please use forum.

RuckZuck
Posts: 12
Joined: Sat Mar 24, 2018 2:13 am

Re: UE65H6470 Firmware Problems (UEErH6470 after downgrade)

Post by RuckZuck » Sat Apr 27, 2019 12:01 am

I've tested something.
Changed the panel-type from "65L1AF0VJ" into "65L1AF0V" in service-menu, done the 0000 downgrade and updated it to 2130.
colours look perfekt, sykpe-replacement root works, oscam also.
Only thing I can't live with is the fact that the lower 50% of the Display is jerking. Not accaptable for me. Same issues with panel-type switched to "65L1AF1V".
Updated back to 2770 and changed panel-type back to originally installed "65L1AF0VJ".

crazyrr
SamyGO Project Donor
Posts: 5
Joined: Tue Jan 19, 2016 9:21 pm

Re: UE65H6470 Firmware Problems (UEErH6470 after downgrade)

Post by crazyrr » Sat Apr 27, 2019 12:15 am

I've test it, but something's happened.
Now i have root on my TV and FW 2130 but every 20sec my TV reboots bootloop.
When i disable Watchdog the TV freez. And the Update button in the menu is grey, so i can not update a other FW!
What can i do now?
That's horrible

Please help me! :shock: Thank you very much!

In the Type selection of the service-menu i can not select my original type anymore. [Factory] -> 0=NONE
[Factory] -> 1=32R6AF0V
[Factory] -> 2=32R1AF0V
[Factory] -> 3=50R6AF0V
[Factory] -> 4=50R1AF0V
[Factory] -> 5=55R1AF0V
[Factory] -> 6=50D6AF0V
[Factory] -> 7=32A1AF0V
[Factory] -> 8=40A1AF0V
[Factory] -> 9=48A1AF0V
[Factory] -> 10=55A1AF0V
[Factory] -> 11=32A6AF0V
[Factory] -> 12=32A6AH1S
[Factory] -> 13=40A6AF0V
[Factory] -> 14=48A6AF0V
[Factory] -> 15=46A2UF7EH
[Factory] -> 16=55A2UF7EH
[Factory] -> 17=65A2UF7EH
[Factory] -> 18=75A2UF7EH
[Factory] -> 19=75A1AF0V
[Factory] -> 20=60H1AF0S
[Factory] -> 21=65L1AF0V
[Factory] -> 22=46L2UF7EH
[Factory] -> 23=55L2UF7EH
[Factory] -> 24=60H2UF7EH
[Factory] -> 25=65L2UF7EH
[Factory] -> 26=50D1AF0V
[Factory] -> 27=22L6TF0E
[Factory] -> 28=28S6AH1S
[Factory] -> 29=28B6AH0S
[Factory] -> 30=55A1AF1V
[Factory] -> 31=55A2UF8RH
[Factory] -> 32=65A2UF8RH
[Factory] -> 33=48A1UF6R
[Factory] -> 34=55A1UF6R
[Factory] -> 35=65D1AF0V
[Factory] -> 36=32A6AF1V
[Factory] -> 37=40A1AF1V
[Factory] -> 38=60H1AF1S
[Factory] -> 39=65L1AF1V
[Factory] -> 40=22L6TF1E
[Factory] -> 41=46A2UFAEH
[Factory] -> 42=55A2UFAEH
[Factory] -> 43=60H2UFAEH
[Factory] -> 44=65A2UFAEH
[Factory] -> 45=40H6AF0V
[Factory] -> 46=32A6AF2V
[Factory] -> 47=48B6AF0V
[Factory] -> 48=32S6AH1S
[Factory] -> 49=55R1AF1V
[Factory] -> 50=22A6TF2E
[Factory] -> 51=28S6AH2S
--- Here Ends in the FW 2130 ----
[Factory] -> 52=32S6AH2S
[Factory] -> 53=65L1AF0VJ
[Factory] -> 54=50R6AF1VJ
[Factory] -> 55=40A1AF0VJ
[Factory] -> 56=48A1AF0VJ
In the Service Menu 3 Parts are missing (look at the picture):
- Local Set
- SW Model
- BOM Model

I have try to put this with libFactory...
Type:
samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libFactory.so SET:17=21
BOM Model:
samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libFactory.so SET:434=6470
SW Model (=UH6400):
samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libFactory.so SET:18=17
Local Set (=EU_GER):
samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libFactory.so SET:194=9

But nothing happened!

So i can choose the Type and next is Tuner.
You do not have the required permissions to view the files attached to this post.