Problem Type and Front color UE50HU6900 [Solved]

Here for general support for H series TVs, request and problem solve area.
Post Reply

User avatar
brikolo09
Posts: 2
Joined: Mon Dec 19, 2016 9:02 pm
Location: France

Problem Type and Front color UE50HU6900 [Solved]

Post by brikolo09 »

Hello everyone,

I ask for your help in trying to solve my problem
I had the unfortunate initiative of going for a ride in the Hidden Menu Samsung of my TV UHD series 6 UE50HU6900

I had a problem of an image freeze and a reboot of the TV during the playback of a movie by usb (fairly recent problem)

So by looking on the web, I tried to put the watchdog on OFF, then unintentionally I moved the option TYPE (I did not know what it was).
I tried a Factory reset but after the image of the TV is really weird with an unusual color tone then multiple attempts by moving the TYPE and FRONT COLOR

I tried load the last firmware's samsung on their offical website (Version : 1100.2 2016.08.19) but update by usb says there is not valid update file for my tv
http://www.samsung.com/fr/support/model/UE50HU6900SXZF
I think that 's not a full firmware, this is just an update

So I'm looking for the right combination TYPE and FRONT COLOR for my model.
I removed the back panel for the labels in order to have as many elements as possible to try to solve my problem.
Between model name 6900,6900S etc ... and types ...I'm lost...

My current settings in options (which are not good):
Type: 50D6AUAVH / / Front Color: U-UHD-H9K

My options (I'm french)
Image

Behind the TV
Image

Inside, when the rear panel is removed
Image

On IDE cable maybe
Image

I hope this will help
thank you in advance
Last edited by brikolo09 on Wed Dec 21, 2016 11:25 pm, edited 1 time in total.
User avatar
brikolo09
Posts: 2
Joined: Mon Dec 19, 2016 9:02 pm
Location: France

Re: Problem Type and Front color UE50HU6900 [Solved]

Post by brikolo09 »

I solved my problem

I think the right combination is:
Type: 50D6AU7VH / Front Color: U-WM-HU7K

After I made a HDMI Calibration with this procedure here http://wiki.samygo.tv/index.php5/Calibration
I plugged my Box on the HDMI of my TV and then I displayed the image of SamyGo from a USB key.
HDMI Calibration: Success
I did an Options / Factory Reset
I turned on the TV and the picture is now correct again.

Post Reply

Return to “[H] Support”