UE32H6400 Eeprom Location

Here for general support for H series TVs, request and problem solve area.
Post Reply

NeoSyp
Posts: 2
Joined: Thu Feb 28, 2019 6:59 pm

UE32H6400 Eeprom Location

Post by NeoSyp » Thu Feb 28, 2019 7:28 pm

Dear forum members,

I recently was gifted a UE32H6400 (without a receipt so no warranty). Though it did initially work well, this changed after changing some settings. I have since then been experiencing the infamous restart loop problem, where the Smart TV logo would appear for some seconds, after which a black screen appears and the TV restarts after 15 seconds or so, without any possibility for interaction via the remote control.

As I have understood from browsing this forum and the associated Wiki, this is due to the Eeprom chip with the settings being corrupted when changing the settings. The only fix that I have come across (other than sending it to Samsung support, which is not worth it for me) is connecting two connectors of this chip, or two holes ('sysreset' and 'sda' if I understood correctly).

I have two questions: the first is which of both methods I should apply (is only one possible with my model, are both okay, neither..?). The second one is: where on my motherboard can I find the correct chip/holes? I have found the locations for other models, but since models seem to vary strongly and I could not find any specific information for my model, I would appreciate your help in finding either the right chip and/or the right holes. I have attached two pictures of the motherboard which I hope are of enough quality.

Thank you in advance!
You do not have the required permissions to view the files attached to this post.

NeoSyp
Posts: 2
Joined: Thu Feb 28, 2019 6:59 pm

Re: UE32H6400 Eeprom Location

Post by NeoSyp » Sun Mar 03, 2019 9:44 am

Please let me know if you require any extra information or whatsoever to help me find this out. Thank you :)

Post Reply

Return to “[H] Support”