H series region change

Here for general support for H series TVs, request and problem solve area.
Post Reply

Ralfg60
Posts: 8
Joined: Tue Jul 01, 2014 1:00 am

H series region change

Post by Ralfg60 » Tue Jul 01, 2014 1:06 am

Is it possible to change the region code (local set)?

I do get the service menu by pressing info-menu-mute-power, but there is no "region" visible...
Also tried with the 3speed+factory, the tv blinks in different colours, but doesn't respond to power button.
After pressing the power button on the tv itself, and turn on again, nothing changed.

CI+ is working, but the channels are out of order...

delto95
Posts: 1
Joined: Wed Jun 25, 2014 9:59 pm

Re: H series region change

Post by delto95 » Tue Jul 01, 2014 8:58 am

Try this:


Select TV as source
Press Menu on the remote
Select System
Select Setup (If you are unable to enter Setup go to Support > Self Diagnosis > Reset)
Continue the set up
Stop the setup when you come to the Smart Hub Terms & Conditions, Privacy Policy page and position yourself on the " I accept the general conditions blah blah blah field" where you have to tick the box
Press the following sequence on your remote
MUTE - RETURN - VOL+ - CHAN + - MUTE
Select the country you wish to receive apps from.
Once you have selected the country let the setup complete

Ralfg60
Posts: 8
Joined: Tue Jul 01, 2014 1:00 am

Re: H series region change

Post by Ralfg60 » Tue Jul 01, 2014 10:48 am

Thanx,

I already tried that. The smart hub is set to Netherlands, but I really need to change the "local set"/ region for the use of the CI+ with "Ziggo"

RedHunter
Posts: 1
Joined: Fri Jul 04, 2014 1:54 pm

Re: H series region change

Post by RedHunter » Fri Jul 04, 2014 2:00 pm

Same question here, is it possible to change the Local Set on an H(U) Samsung TV series 7 or 8.
Has anyone been able to change it with a Service Remote maybe?

Hopefully there is a solution available

Ralfg60
Posts: 8
Joined: Tue Jul 01, 2014 1:00 am

Re: H series region change

Post by Ralfg60 » Mon Jul 07, 2014 7:55 pm

No luck so far...

djlex
SamyGO Project Donor
Posts: 26
Joined: Tue Jan 07, 2014 4:58 pm

Re: H series region change

Post by djlex » Tue Jul 08, 2014 6:01 pm

Hello

you can change Localset with orig. Samsung IR extender and Computer or you have a Samsung mobile with IR
Samsung IR extender is maybe it is with your Tv packet.

You need the Ir to Wav Files

How to in German

Hallo

Es besteht die M?glichkeit die Umstellung auf Localset EuGer ohne Service Fernbedienung.

Man nimmt die originale mitgelieferte IR Sender und schliesst es an Kopfh?rer Anschluss an gew?hnliche Laptop oder Comp im meinem Fall hatte ich Mac Book Air.

IR to Wav Datei ?ber Quick Time Player laufen und so kommt man in den Service Bereich Samsung.

Serice men? gelangt man u?ber die Tasten


INFO+MENU+MUTE+POWER (from stand by)

INFO+FACTORY (from normal mode)

Dann einfach dann die

FACTORY+3SPEED

wave Dateien abspielen und man hat zugriff auf service Men?.

Dann nur LocalSet von Eu auf EuGer stellen Factory Reset durchf?hren.

Danach hat dann die Funktion wie HBBTV und Senderliste auf deutsch sortiert.

Mit freundlichen Gr??en

Wav Dateien Download http://wiki.samygo.tv/index.php5/Remote ... m_IR_codes
UE48H8000 ----> UE48H8090 GFPDEUC 1270.3 ------> 1322 -----> back to 1270 and working well (1322 not good tv to slow and hangs) (rooted)

UE32M5590

miazza
SamyGO Project Donor
Posts: 677
Joined: Wed Apr 03, 2013 6:10 pm

Re: H series region change

Post by miazza » Wed Jul 09, 2014 7:58 am

djlex wrote:Hello

you can change Localset with orig. Samsung IR extender and Computer or you have a Samsung mobile with IR
Samsung IR extender is maybe it is with your Tv packet.

You need the Ir to Wav Files

How to in German

Hallo

Es besteht die M?glichkeit die Umstellung auf Localset EuGer ohne Service Fernbedienung.

Man nimmt die originale mitgelieferte IR Sender und schliesst es an Kopfh?rer Anschluss an gew?hnliche Laptop oder Comp im meinem Fall hatte ich Mac Book Air.

IR to Wav Datei ?ber Quick Time Player laufen und so kommt man in den Service Bereich Samsung.

Serice men? gelangt man u?ber die Tasten


INFO+MENU+MUTE+POWER (from stand by)

INFO+FACTORY (from normal mode)

Dann einfach dann die

FACTORY+3SPEED

wave Dateien abspielen und man hat zugriff auf service Men?.

Dann nur LocalSet von Eu auf EuGer stellen Factory Reset durchf?hren.

Danach hat dann die Funktion wie HBBTV und Senderliste auf deutsch sortiert.

Mit freundlichen Gr??en

Wav Dateien Download http://wiki.samygo.tv/index.php5/Remote ... m_IR_codes
Never tested on H series. On E and F it is proven to work.
AVOID TO PUBLISH AND DISCLOSE SAMYGO PROJECTS ON OTHER FORUM.

djlex
SamyGO Project Donor
Posts: 26
Joined: Tue Jan 07, 2014 4:58 pm

Re: H series region change

Post by djlex » Wed Jul 09, 2014 10:16 pm

Hello

i have made on my UE48H8000 ant its Working.
UE48H8000 ----> UE48H8090 GFPDEUC 1270.3 ------> 1322 -----> back to 1270 and working well (1322 not good tv to slow and hangs) (rooted)

UE32M5590

Ralfg60
Posts: 8
Joined: Tue Jul 01, 2014 1:00 am

Re: H series region change

Post by Ralfg60 » Thu Jul 10, 2014 8:08 pm

I have an UE48H6400 and there is no "LocalSet" visible, also not after 3speed+factory. The TV blinks in different colors, but doesn't turn off with the remote. Need to press the hardware power button. But after that, still nothing with regio visible in the menu.

Ralfg60
Posts: 8
Joined: Tue Jul 01, 2014 1:00 am

Re: H series region change

Post by Ralfg60 » Thu Jul 10, 2014 8:19 pm

found some new info:

Apparantly the H and HU series need another service remote. The 3speed and Factory buttons from previous series don't work anymore on H and HU series.
I found it on a german forum: http://www.hifi-forum.de/viewthread-151-27329.html

So, does anyone have the .wav ir codes from the new service remote (2014) ?

Post Reply

Return to “[H] Support”