useful for some "Model" or some "Local Set" you can change but you can't save some improvements values in service men?: Solution is ENTER SERVICE MENU' and change "Model" to a better model with enabled functionality values and downgrade according to your hardware. VALUES ARE SAVED NOW!
TO ENTER SERVICE MENU':
1. turn on tv (normal mode)
2. push the "info button", push the "Factory button"
1. turn off tv
2. INFO, MENU, MUTE, POWER, then FACTORY+3SPEED
You can emulate this with infrared smartphone or IR Extender + wav files you can download in this forum (if tv led don't blink when play wavs, audio output is low, try another device)
H6400, ENABLE PVR+MHP+LCN (USEFUL FOR ITALIAN USERS):
ENTER SERVICE MENU' and change "Model" from H6400 to H6500 and "Local Set" to your country
BOM Model = 6400
Model = H6400 ; Local Set = EU => PVR ON ; MHP OFF ;
Model = H6400 ; Local Set = EU_Italy => PVR OFF ; MHP ON ; LCN Italy ;
Model = H6500 ; Local Set = EU_Italy => PVR ON ; MHP ON ; LCN Italy ; Satellite tuner support enabled (but hardware missing)
PVR ON VALUES (after Model change):
MRT Options > PVR Support > ON
MHP ON VALUES (after Model change):
MRT Options > Data Servece Support > ON
MRT Options > JAVA Data Servece Support > ON
in Sub Option > Info Link Country > Italy (optional !?)
H5500, tested solution for ENABLE PVR+MHP+LCN (USEFUL FOR ITALIAN USERS) is:
ENTER SERVICE MENU' and change "Model" from H5500 to H6500 and "Local Set" to your country
BOM Model = 5500
change mrt options as num admi 4>3, num usb 3>2, BT support off, 3d support off ecc to H5500 values
except the values ??that you want to keep (PVR & MHP for example).
to the suggestion of "tendy": changes to the model restore all values to default as "OTN Support: ON" in "Option MRT". it is highly recommended to restore to OFF and prevent software updates.
H4000, H4003, H5000, H5003, H5030 ecc are TV versions without quad core processor and with a different software. You can try to enable something via operator but software platform firmware installed on these models hardly allow big things...
post your tests (at your own risk)
I tried on ue32h5500ay to enable PVR SUPPORT under MRT options but it seems like it doesn't saves changes. I enabled the service option using ir extender and the wav file Factory+3Speed_inv.wav.
After I change "PVR SUPPORT ON", when I switch on my smart tv I have no pvr function enable and if I check the PVR SUPPORT option is again OFF
To save changes do I have simply to switch off my tv?
P.s. the option of number of pvr is already on number 1
This is my test. If someone has some trick for me please me.
(sorry for my english)
(sorry for my english, I'm italian
SW Model: UH6500 (replaced UH6400);
BOM Model: 6500 ( leave this field untouched, it should automatically be changed to 6500 after you change the SW Model);
Local Set: EU_ITALY (replaced EU)
Open MRT Option
OTN Support: OFF (IT'S VERY IMPORTANT FOR THIS ONE TO STAY DISABLED!!!)
Data Service Support: ON
JAVA Data Service Support: ON
PVR SUPPORT: ON [this parameter is already enabled when you set the "SW Model" to UH6500]
Go back to the first page.
Info Link Country: Italy
Switch off the tv, then turn it on again to see if the changes have been applied.
@horizon80: while I was playing with the different parameters, it happened that some fields were being reverted once the tv was turned off (for example PVR Support), but with the current configuration they remain. I hope it will work for you too
Yes it seems MHP is still used in Italy, whereas most other countries evolved to supposedly more flexible HbbTVtendi wrote:[Is this function called MHP?]
Somehow I'm not surprisedYes it seems MHP is still used in Italy, whereas most other countries evolved to supposedly more flexible HbbTV