Page 27 of 27

Re: Rooting LATEST H firmware [discuss]

Posted: Wed Jan 09, 2019 10:29 am
by sectroyer
Problem is with kernel version:

Code: Select all

anyver: version magic '0143, product preempt mod_unload ARMv7 ' should be '0143, perf preempt mod_unload ARMv7 '
you might try patching anyver to match your fw version. Tough no idea how it will behave also do we have source code for this kernel? Modules might require recompilation...

Re: Rooting LATEST H firmware [discuss]

Posted: Wed Jan 09, 2019 10:19 pm
by hotm
Thank you very much for your answer.
Unfortunately I have limited linux knowledge, and I do not know how to do what you recommended.
Today I tried App LibNetSwitch presented here > https://forum.samygo.tv/viewtopic.php?f=75&t=9692 . The TV started on Wired connection (even I had no LAN cable connected to LAN port). I changed to Wireless connection by Remote control in TV Menus and tried Yotube, and big, big surprise: it worked fine! Tried also FTP,Telnet connection and they worked fine, so root was OK.
After that, I powered off the TV, connected a LAN cable to LAN port, and powered TV. TV started again on Wired connection, and I tried Youtube and it worked also. Checked FTP,Telnet connection and they worked fine, so root was also OK.
So this library LibNetSwitch is doing something good for using Youtube, HBOGO and others, but TV starts every time on Wired connection. Can I do something to load what LibNetSwitch do, but to automatically connect on Wireless connection on startup of TV? I mean like a command line to automatically switch to Wireless connection after LibNetSwitch is already loaded?

Re: Rooting LATEST H firmware [discuss]

Posted: Thu Jan 10, 2019 8:03 am
by sectroyer
so tv DOES start on wired connection? Good it means all problems solved :) Congratulations. You should ALWAYS use cable :)

Re: Rooting LATEST H firmware [discuss]

Posted: Fri Jan 11, 2019 10:02 am
by hotm
Not all problems...to stay with a cable through all the house conflicts with my wife!
Is there any telnet command to switch to wireless after the boot is completed?

Re: Rooting LATEST H firmware [discuss]

Posted: Sun Jan 13, 2019 9:39 am
by juusso
In service menu must be option for default network connection. Wired or wireless. IMHO

Re: Rooting LATEST H firmware [discuss]

Posted: Tue Jan 14, 2020 1:19 pm
by sectroyer
hotm wrote: Fri Jan 11, 2019 10:02 am Not all problems...to stay with a cable through all the house conflicts with my wife!
Is there any telnet command to switch to wireless after the boot is completed?
Yes, there is a lib for that:)

Re: Rooting LATEST H firmware [discuss]

Posted: Wed Jan 15, 2020 7:43 am
by hotm
Thanks for reply. I know, there is LibNetSwitch lib.
I made a lot of tests. Youtube hangs sometimes even if the LibNetSwitch is activated.
Unfortunately I cannot find older T-N14MJDEUC firmware than ver1121.0 to test. With new ones I don't want to try!

Re: Rooting LATEST H firmware [discuss]

Posted: Wed Jan 15, 2020 9:05 am
by sectroyer
Well your question wasn't "I have youtube problems, blah blah blah". You wanted to switch to wifi. This is what LibNetSwitch DOES!!!! You will NOT "switch more" to wifi or cable :)