LE32A550P1

Information, quest?ons and any other thing that related with A series.
Post Reply

Kalis
Posts: 4
Joined: Mon Jan 28, 2013 12:08 am

LE32A550P1

Post by Kalis » Mon Jan 28, 2013 12:27 am

Hello
Sorry for my Englich but that would be translated with Google.
My problem: I want to do with my Samsung LE23A550P1RXXC an update but I got a Storm loss as there _Upgrading Do not detach USB Aquipment. I now want some time to establish a connection to the TV Putty unsuccessful. Other action taken by. Putty serial speed 9600 databits 8 Stop1 none, none then to switch to serial session and in the end to open. Then I connect to the TV and put the plug in one eXLink but remains black putty. What am I doing wrong?
Is it at all possible so as to produce a connection?
Please help

greeting

Edit: I have not ( Control -> Sub Option -> RS-232 Jack -> [ Debug | UART | Logic ] )

sbav1
Official SamyGO Developer
Posts: 374
Joined: Fri Jan 15, 2010 10:20 am

Re: LE32A550P1

Post by sbav1 » Mon Jan 28, 2013 1:22 pm

It's not very clear what exactly are you trying to achieve.. If I understand correctly, your TV got bricked during unsuccessful firmware upgrade, right?
Is it a complete brick (no picture etc.), or do you still have access to service menu - if yes, there seems to be an option for forcing USB firmware upgrade from service menu, it's mentioned in the service manual (http://elektrotanya.com/samsung_le32-37 ... nload.html).

This is (most probably, I'm not 100% sure) MediaTek MT8226 based unit, and it probably doesn't have very useful serial console to speak of (there is no linux onboard this model). To access serial console (if any) you will probably have to set RS232 port to 115200 baud, and maybe alter some settings in the service menu too, like "Control -> Uart select" and "Control -> Service select" (warning: possibly dangerous!!!).

Also, there is good chance emergency upgrade may be possible via RS232 port for MT8226 based models, see http://www.avforums.com/forums/15270244-post4.html. Also dangerous, and quite poorly documented procedure..

I have a slightly different model (LE32A551P2R), which I use as PC monitor - but I never attempted to hack it in any meaningful way, there was simply not very much to gain. AFAIRC, if you want to have look what exactly is inside the firmware, you can extract it's contents with MtkExtract (http://newage.mpeg4-players.info/mt1389 ... tools.html).

Kalis
Posts: 4
Joined: Mon Jan 28, 2013 12:08 am

Re: LE32A550P1

Post by Kalis » Mon Jan 28, 2013 1:48 pm

Hello
Thanks for the answer. My LCD is unfortunately a complete brick (no picture, etc.), and I can not get to the service menu for this to ask for. I do not want to get run my LCD hacking but only again.
MT8226 is right, I'll try.

greeting

Kalis
Posts: 4
Joined: Mon Jan 28, 2013 12:08 am

Re: LE32A550P1

Post by Kalis » Mon Jan 28, 2013 2:51 pm

Ok I have it running again after he managed I uploaded the firmware with MTKTool_2.45.03 many thanks now I finally have a ordendlichen monitor :)

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: LE32A550P1

Post by juusso » Mon Jan 28, 2013 2:52 pm

Well! Could you please make some short how-to about your unbricking? Thanks! :)
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Kalis
Posts: 4
Joined: Mon Jan 28, 2013 12:08 am

Re: LE32A550P1

Post by Kalis » Mon Jan 28, 2013 4:10 pm

I've loaded MtkTool (http://www.avforums.com/forums/15270244-post4.html) down after that I have downloaded on Samsung.com the original firmware.
MtkTools'm open and load the unzipped firmware file selected. Then simply click Upgrade and wait until it is finished. When it is done manually reboot Samsung (plug pull out).

jamesarness

Re: LE32A550P1

Post by jamesarness » Tue Jan 07, 2014 7:48 am

Thanks for sharing information,your information are very helpful for me and increase my knowledge.

Post Reply

Return to “A Series”