Debug console un48j5000

General forum talking area for J series TVs.
Post Reply

MarkyMark22
Posts: 1
Joined: Fri Feb 23, 2018 7:07 am

Debug console un48j5000

Post by MarkyMark22 » Fri Feb 23, 2018 7:16 am

Is it possible to enable debug console for the un48j5000? The service menu only gives 2 relevant options : "USB Serial" and "rs232 jack. I set USB SERIAL to ON, and rs232 jack to UART (only other choice is FANET). Other guides say that debug should be an option but it doesn't show up-to-date for me.

There's no 3.5 mm jack for me to plug an exlink cable in. I've tried USB to USB, as well as USB to serial, and I can't get any data to appear. Does this TV support exlink? If so, how can I access the debug console?

Thanks

sectroyer
Official SamyGO Developer
Posts: 5732
Joined: Wed May 04, 2011 5:10 pm

Re: Debug console un48j5000

Post by sectroyer » Thu May 17, 2018 11:46 am

MarkyMark22 wrote:
Fri Feb 23, 2018 7:16 am
Is it possible to enable debug console for the un48j5000? The service menu only gives 2 relevant options : "USB Serial" and "rs232 jack. I set USB SERIAL to ON, and rs232 jack to UART (only other choice is FANET). Other guides say that debug should be an option but it doesn't show up-to-date for me.

There's no 3.5 mm jack for me to plug an exlink cable in. I've tried USB to USB, as well as USB to serial, and I can't get any data to appear. Does this TV support exlink? If so, how can I access the debug console?

Thanks
Yes you can either use audio jack:
https://forum.samygo.tv/viewtopic.php?f ... rt#p104229
Or usb serial:
https://wiki.samygo.tv/index.php?title= ... M/Q_Series
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

Post Reply

Return to “[J] General”