RC compatibility

This forum is for information related with J series hardware instead of firmware/software.
Post Reply

User avatar
beatfreak
SamyGO Project Donor
Posts: 553
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

RC compatibility

Post by beatfreak » Mon Jan 25, 2016 1:49 pm

Has anyone ever tried to use a j-series remote control on a older samy (like C/D/E/F) ?
If they work that would mean sams still uses the same IR codes (E0E0 pre_data) and we could finally have a master-code-table with function-number, key-code and ir-code.

did one of the devs come across a mapping table like this

Code: Select all

       KEY_POWER           0x40BF
       KEY_1               0x20DF
       KEY_2               0xA05F
       KEY_3               0x609F
       
?
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

sectroyer
Official SamyGO Developer
Posts: 5665
Joined: Wed May 04, 2011 5:10 pm

Re: RC compatibility

Post by sectroyer » Mon Jan 25, 2016 1:53 pm

Nope but I tried "older remote" on J and works as a charm :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

User avatar
beatfreak
SamyGO Project Donor
Posts: 553
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: RC compatibility

Post by beatfreak » Fri Feb 12, 2016 8:12 am

What about the general list of key functions (the one used for control via network, not related to ir commands)? Did they change it over the years? The last one i have seen had 255 keys/function numbers.
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

Post Reply

Return to “[J] Hardware”