How to connect Home Theater with SCART output to J-series TV

This forum is for information related with J series hardware instead of firmware/software.
Post Reply

rejected
Posts: 23
Joined: Sat Jul 18, 2015 3:20 pm

How to connect Home Theater with SCART output to J-series TV

Post by rejected » Mon Nov 14, 2016 11:50 am

I try to connect (a little vintage) Panasonic DVD Home Theater Sound System (SA-HT75) with Samsung JU7000 (JU7100), both to play DVDs (video only goes from HT to TV) or to amplify TV sound (audio only goes from TV to HT).
While there was a SCART interface with HU6900 series, there is no SCART interface with JU7000 series :evil:
I do have SCART <-> 6xRCA (6xCinch) cable (marked as 3xaudio+video Out and 3xaudio+video In), but there is no signal from HT on TV :oops:
Connecting with composite video (analogue) HT output (yellow) to TV composite video input (yellow) was successful, but I guess there is a chance of better signal quality with HT SCART output (s-Video or RGB signals).
Might be my cable is wrong (as there is a lot of different EURO <-> RCA cables on the market) or is just that impossible to connect SCART HT with JU7000 series - any ideas?

maximob
Posts: 101
Joined: Wed Oct 26, 2016 9:26 am

Re: How to connect Home Theater with SCART output to J-series TV

Post by maximob » Wed May 10, 2017 8:59 am

try an adapter

Post Reply

Return to “[J] Hardware”