UA46C8000 - No display, No backlight LED, Going in to Reboot Loop

Support for C series TVs that all user could ask. Please do not ask a questions at other forums.
Post Reply

shrouti
Posts: 1
Joined: Sun Apr 24, 2016 9:49 am

UA46C8000 - No display, No backlight LED, Going in to Reboot Loop

Post by shrouti »

Hi, I have the Samsung 46 inch LED Smart TV. Model no is UA46C8000 its out of warranty and I have been using it for almost 4+ yrs with no issues.
A friend of mine, tried experimenting with the original factory settings and screwed it up.
Symptons are:
When powered on, there is no display, no image after testing with flashlight, restart sound can be heard, Samsung logo on the bottom panel is continuously lit, the TV goes in to a restart or reboot loop continuously turning on and off with the red light on the panel blinking on and off....

Please help as the service men and the repair man is taking me for a ride with various diagnosis...


Thanks,
Sam?
User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: UA46C8000 - No display, No backlight LED, Going in to Reboot Loop

Post by beatfreak »

eeprom reset could work
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

Post Reply

Return to “[C] Support”