No data on PC but it's good on TV

Support for C series TVs that all user could ask. Please do not ask a questions at other forums.
Post Reply

Miliosek
Posts: 9
Joined: Fri Aug 16, 2013 6:52 pm

No data on PC but it's good on TV

Post by Miliosek » Wed Sep 06, 2017 12:18 am

No data on PC but it's good on TV
Image
Image
Image
Image
Image
Image
SpoilerShow
Description: [F:]Urządzenie pamięci masowej USB(USB DISK 2.0)

Protocal Version: USB 2.00
Current Speed: High Speed

USB Device ID: VID = 13FE PID = 3600

Device Revision: 0100

Product Model: USB DISK 2.0
Product Revision: PMAP

Chip Part-Number: Unknown

Tools on web: dl.mydigit.net/special/up/phison.html
Image
SpoilerShow
Logical drive : Q:\ Capacity: 0.0G
Device ID : VID = 13FE PID = 3600
Device SN : 07AA0201655B53F0
Device version : PMAP

Device vendor :
Device model : USB DISK 2.0
Protocol :
Max power : not support

Partition type : Device active :
Aligned state : Misaligned

Controller : Phison
Controller model: PS2251-50

Tools : http://www.upan.cc/tools/mass/Phison/
OS Version : Windows 7 Personal Service Pack 1
Update Status : The current version is the latest version!
SpoilerShow
Cytat:
========== Storage Volume on Disk 2 in Partition 1 ==========
MountPoint = Q:\
Volume Size = no media
File System = no media
Volume Serial = ---
File System Flags = -
Volume Name = \\?\Volume{03b1e87f-b6f2-11e5-9dd1-001e33adc060}\
KernelName = \Device\HarddiskVolume12
Win32 Device Name = \\.\HarddiskVolume12
Writable = FILE_NOT_FOUND
Disk Size = no media
Drive Type = removable
Bus Type = USB
USB LocationIds = PCIROOT(0)#PCI(1D07)#USBROOT(0)#USB(3)
USB ContainerId = {1247c96a-ba04-5f37-a153-9894c9400757}
Device Types = Untested
DeviceID = STORAGE\VOLUME\_??_USBSTOR#DISK&VEN_&PROD_USB_DISK_2.0&REV_PMAP#07AA0201655B53F0&0#{53F56307-B6BF-11D0-94F2-00A0C91EFB8B}
DeviceID Drive = USBSTOR\DISK&VEN_&PROD_USB_DISK_2.0&REV_PMAP\07AA0201655B53F0&0
DeviceID USB = USB\VID_13FE&PID_3600\07AA0201655B53F0
Device ID HostCtl = PCI\VEN_8086&DEV_293A&SUBSYS_FF1E1179&REV_03\3&E89B380&0&EF
Host Controller = Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
DevicePath = \\?\storage#volume#_??_usbstor#disk&ven_&prod_usb_disk_2.0&rev_pmap#07aa0201655b53f0&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FS Write Cache = no
USB Version = 2.0
USB Friendly Name = USB device
USB Serial = ---
USB Port Name old = 7-3


-------------------------- Disk 2 --------------------------
Disk Size = no media
Disk Writable = FILE_NOT_FOUND
Trim Enabled = no
PtMgr DiskId GUID = {03b1e87d-b6f2-11e5-9dd1-001e33adc060}
Volume Count = 1
Bus Type = USB
USB LocationIds = PCIROOT(0)#PCI(1D07)#USBROOT(0)#USB(3)
USB ContainerId = {1247c96a-ba04-5f37-a153-9894c9400757}
Drive Type = removable
Device Types = Untested
Device ID = USBSTOR\DISK&VEN_&PROD_USB_DISK_2.0&REV_PMAP\07AA0201655B53F0&0
Device ID USB = USB\VID_13FE&PID_3600\07AA0201655B53F0
Device ID HostCtl = PCI\VEN_8086&DEV_293A&SUBSYS_FF1E1179&REV_03\3&E89B380&0&EF
Host Controller = Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
USB Speed = High-Speed
KernelNames = \Device\Harddisk2\DR9, \Device\00000095
Win32 Device = \\.\PhysicalDrive2
DevicePath = \\?\usbstor#disk&ven_&prod_usb_disk_2.0&rev_pmap#07aa0201655b53f0&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
Capabilities = 0x30 (UniqueID, SilentInstall)
Removal Policy = surprise removal ('Optimize for quick removal')
Hotplug Device = yes
Hotplug Media = no
Removable Media = yes
Command Queueing = no
Friendly Name = USB DISK 2.0 USB Device
USB Version = 2.0
USB Friendly Name = USB device
USB Serial = ---
USB Port Name old = 7-3
Source: http://www.elektroda.pl/rtvforum/topic3144280.html

Pendrive don't work on PC, but it display all folders and images, but I don't want to recover images. I think it's problem with TV decrypt ?

User avatar
juusso
SamyGO Moderator
Posts: 9775
Joined: Sun Mar 07, 2010 6:20 pm

Re: No data on PC but it's good on TV

Post by juusso » Wed Sep 06, 2017 6:00 am

you should have explained your problem in more detailed way. As i first saw this topic i thought you`re spamming. A lot of useless pictures w/o useful description of the problem.

Yes, you cant open your USB pen drive on windows without special tools. Because pen drive has xfs filesystem , which isn`t natively supported by windows. If you have read more on forum, you would have understood better.

Anything else? Good luck!
LE40B653T5W,UE40D6750
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Miliosek
Posts: 9
Joined: Fri Aug 16, 2013 6:52 pm

Re: No data on PC but it's good on TV

Post by Miliosek » Wed Sep 06, 2017 1:29 pm

juusso wrote:
Wed Sep 06, 2017 6:00 am
you should have explained your problem in more detailed way. As i first saw this topic i thought you`re spamming. A lot of useless pictures w/o useful description of the problem.

Yes, you cant open your USB pen drive on windows without special tools. Because pen drive has xfs filesystem , which isn`t natively supported by windows. If you have read more on forum, you would have understood better.

Anything else? Good luck!
Yes and no ...
I could open pen drive with UFS Explorer and get in to my PC (When I recorded something) (The movie/file was encrypted but I had it on my PC), but now I can't even see files on UFS Explorer, but on TV everythings is alright (it display images ...)

User avatar
beatfreak
SamyGO Project Donor
Posts: 553
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: No data on PC but it's good on TV

Post by beatfreak » Wed Sep 06, 2017 6:19 pm

try it with some linux live cd like knoppix or ubuntu, probebly it will complain about an unclean filesystem and offer you to fix it
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

Post Reply

Return to “[C] Support”