Help needed to either hack or restore c650

[Taliq]

Thanks, did work for me.

LE37C650 with FW 3011.

[coyotee]

Hello!
I tried ozyrus guide on my lec650 with 3011 firmware, but after I tried step 13. Choose "Clone USB to TV", I get message can`t read from usb or something like that. I have 1GB usb stick. Can anyone help?, thanks, Bojan!

[Taliq]

I ran into the same issue. I needed to change the path in a clone.dat file of the firmware. I think it was sda1 first and I edited it to sdb1. Maybe you can also try a different USB port first.

[coyotee]

Ok, I changed the path and it looks like it worked, I think... Some data transfer was made from USB to TV, but It didn`t take 3-4 min, but lets say 30sec inc. restart of TV.
Now don't do anything just wait couple of minutes, there will be black screen and Tv will restart (approx. 3-4 min).
After that I turn off hotel mode and went to scan the channels.(this worked).. I think I missed something. I cant connect via telnet, or Dont know how.. Things to do now:
Try to connect to your Tv via Telnet.
Run command cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh

I need help, thanks!

[alexsay]

How can I remove the hack?

[Taliq]

Ok, I changed the path and it looks like it worked, I think... Some data transfer was made from USB to TV, but It didn`t take 3-4 min, but lets say 30sec inc. restart of TV.
Now don't do anything just wait couple of minutes, there will be black screen and Tv will restart (approx. 3-4 min).
After that I turn off hotel mode and went to scan the channels.(this worked).. I think I missed something. I cant connect via telnet, or Dont know how.. Things to do now:
Try to connect to your Tv via Telnet.
Run command cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh

I need help, thanks!

Did you add the 'SamyGO.sh' path to the USB root pointing to the 'rcSGO' file? My SamyGO.sh is just

Code: Select all

/dtv/usb/sda1/SamyGO/rcSGO >/dev/null 2>&1 &

If it doesn't work you have to check the path.

[ebakardzhiev]

Ok, I changed the path and it looks like it worked, I think... Some data transfer was made from USB to TV, but It didn`t take 3-4 min, but lets say 30sec inc. restart of TV.
Now don't do anything just wait couple of minutes, there will be black screen and Tv will restart (approx. 3-4 min).
After that I turn off hotel mode and went to scan the channels.(this worked).. I think I missed something. I cant connect via telnet, or Dont know how.. Things to do now:
Try to connect to your Tv via Telnet.
Run command cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh

I need help, thanks!

I have the same issue. First it doesn't like to copy the content from the USB to the TV and I had to change sda2 to sda1 i Clone.dat (T-Valdeuc). Cloned USB to TV for a second and said will restart and press OK. So I did. After that restarted a couple of times and says no channels even no telnet access still in Hotel Mode. So, no way ot execute "Run command cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh ".

[MicK]

Ok, I changed the path and it looks like it worked, I think... Some data transfer was made from USB to TV, but It didn`t take 3-4 min, but lets say 30sec inc. restart of TV.
Now don't do anything just wait couple of minutes, there will be black screen and Tv will restart (approx. 3-4 min).
After that I turn off hotel mode and went to scan the channels.(this worked).. I think I missed something. I cant connect via telnet, or Dont know how.. Things to do now:
Try to connect to your Tv via Telnet.
Run command cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh

I need help, thanks!

I have the same issue. First it doesn't like to copy the content from the USB to the TV and I had to change sda2 to sda1 i Clone.dat (T-Valdeuc). Cloned USB to TV for a second and said will restart and press OK. So I did. After that restarted a couple of times and says no channels even no telnet access still in Hotel Mode. So, no way ot execute "Run command cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh ".

Hi,

same issue with "can't read from usb" with fw 3009.2 and 3011.0 happend to me too. I also tried to change sda2 to sda1 in Clone.dat and afterwards I was able to import it from USB to TV but not telnet nor other acces to the TV.
Now I have 3011 fw rooted with telnet, ftp, http. Steps bellow helped me for LE40C650 T-VALDEUC fw

1) apply 0000.0 firmware
2) from 0000.0 update to 3005.1 and then hack it via Internet@TV [url]wiki.samygo.tv/index.php5/Hacking_C-Series_TV_with_Internet@TV_only[/url]
3) from 3005.1 update to 3009.2 and hack it over hotel mode [url]wiki.samygo.tv/index.php5/Hacking_TV_over_Hotel_mode_(C650_T-VALDEUC-3009.2)[/url]. Hacking without previuos Internet@TV hack gave me the "can't read from usb".
4) from 3009.2 update normally to 3011.0 and telnet access shouldn't vanish

You might skip step 3, hacking 3005.1, and go from 3005.1 to 3011.0 and then hack it over hotel mode. I didn't try it

[ebakardzhiev]

Ok, I changed the path and it looks like it worked, I think... Some data transfer was made from USB to TV, but It didn`t take 3-4 min, but lets say 30sec inc. restart of TV.
Now don't do anything just wait couple of minutes, there will be black screen and Tv will restart (approx. 3-4 min).
After that I turn off hotel mode and went to scan the channels.(this worked).. I think I missed something. I cant connect via telnet, or Dont know how.. Things to do now:
Try to connect to your Tv via Telnet.
Run command cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh

I need help, thanks!

I have the same issue. First it doesn't like to copy the content from the USB to the TV and I had to change sda2 to sda1 i Clone.dat (T-Valdeuc). Cloned USB to TV for a second and said will restart and press OK. So I did. After that restarted a couple of times and says no channels even no telnet access still in Hotel Mode. So, no way ot execute "Run command cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh ".

Hi,

same issue with "can't read from usb" with fw 3009.2 and 3011.0 happend to me too. I also tried to change sda2 to sda1 in Clone.dat and afterwards I was able to import it from USB to TV but not telnet nor other acces to the TV.
Now I have 3011 fw rooted with telnet, ftp, http. Steps bellow helped me for LE40C650 T-VALDEUC fw

1) apply 0000.0 firmware
2) from 0000.0 update to 3005.1 and then hack it via Internet@TV [url]wiki.samygo.tv/index.php5/Hacking_C-Series_TV_with_Internet@TV_only[/url]
3) from 3005.1 update to 3009.2 and hack it over hotel mode [url]wiki.samygo.tv/index.php5/Hacking_TV_over_Hotel_mode_(C650_T-VALDEUC-3009.2)[/url]. Hacking without previuos Internet@TV hack gave me the "can't read from usb".
4) from 3009.2 update normally to 3011.0 and telnet access shouldn't vanish

You might skip step 3, hacking 3005.1, and go from 3005.1 to 3011.0 and then hack it over hotel mode. I didn't try it

Hi,
It works. Thanks! I already have telnet access, FTP and some kind of web access.Also have installed SamyGO.sh and PVR decrypt. I do not see any loaded modules in the WEB-IU. What do I have to do after I run: "Run command cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh "?

[coyotee]

Thanks both MicK and ebakardzhiev ! I will try this methode, but first I need 3005.1, 3009.2 firmwares? Where do I get this, thus on samsung webp. there aren`t anymore?

thanks