PRV recording via SamyGO-All-Extensions

Support for C series TVs that all user could ask. Please do not ask a questions at other forums.
Post Reply

sco
Posts: 20
Joined: Sun Nov 27, 2011 2:20 pm

PRV recording via SamyGO-All-Extensions

Post by sco » Wed Jan 25, 2012 4:46 pm

Hello,
i have been using the cgi-bin/test.cgi page to diagnose problems.

i followed these instructions http://wiki.samygo.tv/index.php5/PVR_Re ... r_C-Series

so all the *.init.dis.remi have been used.

/dtv/usb/sda1/SamyGO/etc/init.d/80_80_record_to_nwshare.init
Status:
pls request it on forum
error : No virtual device found ready for PVR or already mounted

Code: Select all

+ . /dtv/SGO.env
+ SYSROOT=/dtv/usb/sda1/SamyGO
+ MOUNT_PATH=/dtv/usb/sdb
+ export MOD_DIR=/dtv/usb/sda1/SamyGO/lib/modules/2.6.24_SELP.4.3.x-Cortex-A8
+ export TMPDIR=/dtv
+ export HOME=/mtd_wiselink
+ export SMB_CONF_PATH=/dtv/usb/sda1/SamyGO/etc/samba/smb.conf
+ LOGFILE=/dtv/usb/sda1/SamyGO/samygo.log
+ LD_LIBRARY_PATH=/dtv/usb/sda1/SamyGO/opt/privateer/lib:/dtv/usb/sda1/SamyGO/opt/privateer/usr/lib:/dtv/usb/sda1/SamyGO/lib:/dtv/usb/sda1/SamyGO/usr/lib:/lib
+ PATH=/dtv/usb/sda1/SamyGO/opt/privateer/sbin:/dtv/usb/sda1/SamyGO/opt/privateer/bin:/dtv/usb/sda1/SamyGO/opt/privateer/usr/bin:/dtv/usb/sda1/SamyGO/opt/privateer/usr/sbin:/dtv/usb/sda1/SamyGO/sbin:/dtv/usb/sda1/SamyGO/bin:/dtv/usb/sda1/SamyGO/usr/bin:/dtv/usb/sda1/SamyGO/usr/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/etc/Scripts/CIP:/etc/Scripts:/etc/Scripts/CIP
+ export ENV=/dtv/.ashrc
+ export FRAMEBUFFER=/dev/sam/fb0
+ export DISTROOT=/dtv/usb/sda1/SamyGO/opt/privateer
+ SAMYGODEVS=/dev/sdb /dev/sdc
+ PVRSERVER=192.168.1.66
+ PVRPATH=/mnt/HD/HD_a2/record
+ M_OPTS=soft,tcp,nolock
+ WAIT=40
+ echo
+ WriteToLog Start Record to Network Share script (80_80_record_to_nwshare.init) 1
+ date +%Y%m%d-%H%M%S
+ NOW=19700101-002602
+ echo  19700101-002602 Start Record to Network Share script (80_80_record_to_nwshare.init)
+ CheckNFSServer 192.168.1.66
+ WriteToLog Check if server 192.168.1.66 is reachable and NFS service available... 1 -n
+ date +%Y%m%d-%H%M%S
+ NOW=19700101-002602
+ echo -n 19700101-002602 Check if server 192.168.1.66 is reachable and NFS service available...
+ showmount --no-header -e 192.168.1.66
+ [ 0 = 0 ]
+ WriteToLog OK 2
+ echo  OK
+ return 0
+ [ 0 = 0 ]
+ SearchPVRImageMP
+ FOUND=false
+ WriteToLog Search for mount point of pvrimage... 1
+ date +%Y%m%d-%H%M%S
+ NOW=19700101-002602
+ echo  19700101-002602 Search for mount point of pvrimage...
+ sleep 40
+ echo /dev/sdb /dev/sdc
+ grep -e ^/dev/sdb /proc/mounts
+ cut -d   -f 2
+ MPOINT=/dtv/usb/sdb
+ [ -e /dtv/usb/sdb/.PlaceHolderDO-NOT-REMOVE ]
+ grep -e ^/dev/sdc /proc/mounts
+ cut -d   -f 2
+ MPOINT=
+ [ -e /.PlaceHolderDO-NOT-REMOVE ]
+ [ false = true ]
+ echo No virtual device found ready for PVR or already mounted
No virtual device found ready for PVR or already mounted
+ WriteToLog No virtual device found ready for PVR or already mounted 1
+ date +%Y%m%d-%H%M%S
+ NOW=19700101-002642
+ echo  19700101-002642 No virtual device found ready for PVR or already mounted
+ WriteToLog End Record to Network Share script (80_80_record_to_nwshare.init) 1
+ date +%Y%m%d-%H%M%S
+ NOW=19700101-002642
+ echo  19700101-002642 End Record to Network Share script (80_80_record_to_nwshare.init)
double nfs shares are operational
both shares have rw access
i have two virtual usb devices one works nicely for the shares
the other says "no media found on this device" (nothing inside the share)

what am i doing wrong??

its worth noting that i didnt use the "SamyGO-All-Extensions-Bugfix-v0.03.6-r15-for-valencia-20111001120232.zip"
and the only modules iv used so far from "SamyGO-All-Modules-v0.03.7-r01-for-armv7a_valencia_DEV-T-VAL6DEUC-20110912071317.zip"
were : cifs.ko - dummy_hcd.ko - g_file_storage.ko

main extensions came from "SamyGO-All-Extensions-v0.03.6-r12-for-T-VALDEUC-20110103184650.zip"
i used the configs from "samygo-init.d.tar.gz"
and rcSGO. rc.sysinit from samygo-trunk.tar.gz
maybe rcSGO and sysinit are not right versions????

sco
Posts: 20
Joined: Sun Nov 27, 2011 2:20 pm

Re: PRV recording via SamyGO-All-Extensions

Post by sco » Thu Jan 26, 2012 9:11 pm

i think seeing as i had to change /dtv/usb/sda1/SamyGO/etc/init.d/02_04_vusb.init
PVRIMAGE="$SYSROOT/pvrimage" to PVRIMAGE="/dtv/usb/sda1/SamyGO/pvrimage"
to make the vusb find the pvrimage :s .........

maybe my initial setup is incorrect

could someone confirm steps 10. 11. 12. from http://wiki.samygo.tv/index.php5/PVR_Re ... r_C-Series
using a linux machine with usb plugged in
cd /media/USB/SamyGO
mkfs.xfs -f -d file,name=pvrimage,size=1536m
mount -t xfs -o loop pvrimage /media/USB/SamyGO/ {OR should i mount on ubuntu random mount /tmp or even the ROOT of USB /media/USB}
touch /media/USB/SamyGO/.PlaceHolderDO-NOT-REMOVE {OR touch /tmp/.PlaceHolderDO-NOT-REMOVE

Post Reply

Return to “[C] Support”