firmware T-MSXMDEUC

Support for C series TVs that all user could ask. Please do not ask a questions at other forums.
Post Reply

derewasazx
Posts: 30
Joined: Mon Jan 02, 2012 6:53 pm

firmware T-MSXMDEUC

Post by derewasazx »

  1. help, brick tv, led on 20 seconds with a black screen with cable Ex-Link says this: codice Samsung Bootloader Infomation release ver : 1004 Release etc : ------------------------------------------- UART2 is used to debug mode(0) load kernel start, size : 131072 + 2883584 byte load_cmac()[918 line]: entry->first_blk = 1, entry->no_blks= 1 1024 bit RSA Sign/Verify Test Success. authentication success XIP Kernel Image ... Starting kernel ... ------------------------------------------ SAMSUNG Mstar Kernel Version : 1004.84(RELEASE) ------------------------------------------ init started: SELP-BusyBox v1.6.0-VD Linux SELP.4.2.1.x (2010-03-25 09:52:34 KST ) multi-call binary starting pid 21, tty '': '/etc/rc.sysinit' /etc/rc.local start!!!! ------------------------------------------- VDLinux 1.1.1.x Mstar RootFS ver 1004 Used kernel ver(module is builed) 1007.88(RELEASE) ------------------------------------------- starting pid 32, tty '': '/bin/cttyhack' /etc/profile start!! /mtd_rwarea/PartitionSwitch_1_0 is detected... 2nd Partition is selected... mount: mounting /dev/stl0/14 on /mtd_appdata/ failed mount: mounting /dev/stl0/14 on /mtd_appdata/ failed umount: cannot umount /mtd_appdata/: Invalid argument _mod_sys_init.176 ioctl ****************************************** Application running is failed.. SW image is stopped.. ****************************************** SELP#> [CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<< [CIP_AUTHULD]==================================================== [CIP_AUTHULD] Authuld Version : 1.1 : REL [CIP_AUTHULD] ==================================================== SELP#> . then stops, takes only the command (CB) but nothing is done, tv LS22PTD with firmware T-MSXMDEUC. warranty expired, any suggestion to restore it, with good easter.

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: firmware T-MSXMDEUC

Post by juusso »

First: please use text formatting for your log, use [ code ][ /code ]:

Code: Select all

your log here
Second: detail explanation: what did you do, what commands did you enter, was TV rooted if yes - which method and so on.

How we could help you from log only?
i just can guess you created non existing alternative firmware ID and switched to non existing, empty partitions.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

derewasazx
Posts: 30
Joined: Mon Jan 02, 2012 6:53 pm

Re: firmware T-MSXMDEUC

Post by derewasazx »

these are the commands I have given:

Code: Select all

[Menu Debug TOP] 
2: Piattaforma Impostazioni di stampa DBG>:2 Input>:0 Input>:0 [ List Debug Platform] 2. Advanced Platform cmd>2 [List Debug Platform] 2: Debug DeviceManager [Module Debug DeviceManager] 90: DeviceManager MW Debug cmd>90 [Gestione periferiche - Menu Debug TOP] 12: DLNA, FLASH, ODD, HDD, MoIP test DBG>: 0x12 [Menu Debug MISC] 11: FLASH, HDD Test di Format DBG>: 0x11 Partition Key:14
TV is not rooted,I did the tests but not gone well.

User avatar
juusso
SamyGO Moderator
Posts: 10124
Joined: Sun Mar 07, 2010 6:20 pm

Re: firmware T-MSXMDEUC

Post by juusso »

why did you format partitions if your tv was not rooted???
the partition number 14 on your TV is for appdata and you shouldn`t format this partition in any case. You could call emergency firmware upgrade prosedure but i doubt if it helps - you`re not alone who bricked in this way.

Here is no help. You have to either bring monitor to service or buy new mainboard. apologize. Playing over exlink is dangerous. and may be expensive.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

derewasazx
Posts: 30
Joined: Mon Jan 02, 2012 6:53 pm

Re: firmware T-MSXMDEUC

Post by derewasazx »

thanks so much

Post Reply

Return to “[C] Support”