[SOLVED] CY-STC1100/XC on UExxC6500

[beatfreak]

ok, bought a UE46C8790 and camera doesn't work there too -.-

btw. I have a UE46C8790 and a not working CY-STC1100 to sell here

[greenhorn]

@beatfreak
you bought oldy UE46C8790 just for skype....and doing tests for your camera?! you are unbelievable... What is so special i 8790?

[beatfreak]

yep
seller lived only 10km from here and tv was about 380?, so should be no problem to sell it again..

C77xx and C8xxx have native skype support and should officially work with STC1100...

[greenhorn]

yes, it is a good deal! Having in mind that I paid 166 EUR for new main board for my C series to have the Sat tuner, it sounds like a great deal.

[beatfreak]

o.m.g. i have never been that happy to see the light of a blue LED in my life ^^

i should have mentioned that the c8790 has been rooted before i bought it and i think somwhere there was the reason that the stc1100 didn't got recognized by skype app

so the first thing i had to do was to tell my cam what fifo means...

then i grabbed my usb2ttl dongle, connected to tv over ex-link and formatted mtd_rwarea as described in wiki

after this i tried option 05 but it said no device info

Code: Select all

====================================
              [ MISC Debug Menu]
        ------------------------------------
           01  : PRINT DLNA Device Info
           02  : PRINT FLASH Device Info
           03  : PRINT ODD Device Info
           04  : PRINT HDD Device Info
           05  : PRINT MoIP Device Info
        ====================================
           11  : FLASH, HDD Format Test
        ====================================
           88  : Shell
        ====================================
           FF : Exit
        ====================================
        DBG> : 0x

after this i went back to advanced platform debug list

Code: Select all

====================================
     [Platform Debug List]
------------------------------------
  1. Basic Platform
  2. Advanced Platform
  3. Java
------------------------------------
  99 : Exit
====================================
cmd> 2

====================================
     [Platform Debug List]
------------------------------------
  1 : FrontRunner Debug
  2 : DeviceManager Debug
  3 : InfoLink Debug
  4 : NetworkManager Debug
  5 : PVR Debug
  6 : MediaPlay Debug
  7 : CEC Debug
  8 : PSA Debug
  9 : SWU Debug
  10 : DMR Debug
  11 : PMR Debug
  12 : HNC Debug
  13 : MoIP Debug
  14 : Browser Debug
  15 : DeviceAPI Debug
------------------------------------
  99 : Exit
====================================

and selected option 13

Code: Select all

cmd> 13

====================================
     [MoIP Debug Module]
------------------------------------
  1 : [OFF] AP_MOIP	
====================================
 Debug Level = Fatal
====================================
 80 : All OFF
 81 : All ON
 85 : Set Debug Level
====================================
<Camera Debugging>
 90 : Start Camera
 91 : Stop Camera
 92 : Mic. Vol. Setting
 93 : Force New GOP for Main H.264
 94 : Force New GOP for Sub H.264
 95 : Start & Stop Test Start
 96 : Start & Stop Test Stop
 97 : Print Camera Status
 98 : Print Camera SRAM LOG
<Skype Debugging>
 100 : Toggle Auto Answer Mode (Current: Disabled)
 101 : Print o_hash 
-----------------------------------------------
102	: Toggle decoding time log (OFF)
103	: Toggle main decoder dump state (OFF)
104	: Toggle sub decoder dump state (OFF)
105	: Toggle TX video dump state (OFF)
106	: Change main encoder res
====================================
 99 : Exit
====================================
cmd> 91
[02;31m[   61|932.793049][0m	MK:>>CMoIPCamera::Stop

====================================
     [MoIP Debug Module]
------------------------------------
  1 : [OFF] AP_MOIP	
====================================
 Debug Level = Fatal
====================================
 80 : All OFF
 81 : All ON
 85 : Set Debug Level
====================================
<Camera Debugging>
 90 : Start Camera
 91 : Stop Camera
 92 : Mic. Vol. Setting
 93 : Force New GOP for Main H.264
 94 : Force New GOP for Sub H.264
 95 : Start & Stop Test Start
 96 : Start & Stop Test Stop
 97 : Print Camera Status
 98 : Print Camera SRAM LOG
<Skype Debugging>
 100 : Toggle Auto Answer Mode (Current: Disabled)
 101 : Print o_hash 
-----------------------------------------------
102	: Toggle decoding time log (OFF)
103	: Toggle main decoder dump state (OFF)
104	: Toggle sub decoder dump state (OFF)
105	: Toggle TX video dump state (OFF)
106	: Change main encoder res
====================================
 99 : Exit
====================================
cmd> 90
[02;31m[   61|956.849874][0m	MK:>>CMoIPCamera::Play
-------------------------------------------------
Start VEnc2 as H.264
-------------------------------------------------
SendCmd[  2643]:    avcenc1( 6) opc=   3 : 00000004,00000000 = 53120
SendCmd[  2644]:   jpegenc0( 7) opc=   3 : 00000020,00000000 = 1948
SendCmd[  2645]:    avcenc1( 6) opc=   1 : 00000005,00000000 = 1835
open bitstream writer type = 'file'
++ calling writer->create()
++ WriteStreamer_OpenBitstreamWriterDefault returned. SWR_BYPASS_MODE = 0
bs write opened 'test.qbx' index = 0
<JC> MWare_Start at 956.908129
<JC> avoc start at 956.908146
SendCmd[  2646]:      avoc0(12) opc=   1 : 00000000,00000000 = 5672
<JC> avsn start at 956.913875
SendCmd[  2647]:      avsn0(13) opc=   1 : 00000000,00000000 = 1809
<JC> audenc start at 956.915738
SendCmd[  2648]:    pcmenc0(10) opc=   1 : 00000000,00000000 = 5988
audio encoder api record called at 956.921853
<JC> videnc start at 956.921931
SendCmd[  2649]:    avcenc0( 4) opc=   4 : 00000000,00000000 = 2000
avcencoderapi record called at 956.923984
<JC> nvpp0 start at 956.924063
SendCmd[  2650]:     nvppmj( 3) opc=   1 : 00000000,00000000 = 1881
<JC> sain start at 956.926002
SendCmd[  2651]:      sain0( 9) opc=   1 : 00000000,00000000 = 1795
StereoAudioInputAPI_Start: done
stereo audio input api start called at 956.927874
<JC> venc2 start at 956.927896
SendCmd[  2652]:    avcenc1( 6) opc=   4 : 00000000,00000000 = 1991
<JC> nvpp2 start at 956.929950
SendCmd[  2653]:     nvppmj( 5) opc=   1 : 00000000,00000000 = 1734
<JC> lvpp start at 956.931749
SendCmd[  2654]:      lvpp0( 2) opc=   1 : 00000000,00000000 = 2085
LiveVideoPreProcAPI_Start called
<JC> encode started...  at 956.933914
start encode
[02;31m[   61|956.933950][0m	MK:<<CMoIPCamera::Played

thats when i saw that the cam got started
skype app now recognizes it

i'll try the moip debug stuff on my C6500 where it still doesn't work to see if i really need to format rwarea to get cam working

look here for final solution