unmounting/formatting /dev/stl0/21 aka mtd_rwcommon

Support for C series TVs that all user could ask. Please do not ask a questions at other forums.
Post Reply

User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

unmounting/formatting /dev/stl0/21 aka mtd_rwcommon

Post by beatfreak »

i tried formatting rwcommon today but tv always responded with unmounting failed device or resource busy...
the same reaction when hotel mode is enabled,
maybe with fake-off for planned recordings?
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: unmounting/formatting /dev/stl0/21 aka mtd_rwcommon

Post by juusso »

umount -lf /dev/stl0/21

check in /etc/profile what exact command should be used to format this partition properly.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
User avatar
beatfreak
SamyGO Project Donor
Posts: 591
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: unmounting/formatting /dev/stl0/21 aka mtd_rwcommon

Post by beatfreak »

ok, i'll try

so its imortant not to reboot if you previously formatted rwarea ;)

EDIT:
new error:

Code: Select all

umount: cannot umount /mtd_rwcommon: Invalid argument

Code: Select all

# umount -lf /dev/stl0/21
# mount -t rfs /dev/stl0/21 /mtd_rwcommon
no error message but no format also...
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

Post Reply

Return to “[C] Support”