Hi,
I use the Remote Control CLI to put my TV in
power saving mode.
(./rcsamy-arm 192.168.178.5 KEY_ESAVING from
viewtopic.php?f=12&t=5794 )
remotely from my Rasspi.
Now I want to check wich Powermode is active
without sitting in front of TV...
can I read somehow by upnp or telnet the powermode or consumption in
some statefile, sys or proc?
Any ideas?
regards
schaschix
remotely reading powermode/powerconsumption?
Re: remotely reading powermode/powerconsumption?
ping your TV
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: remotely reading powermode/powerconsumption?
Hi juuso,
that's not the thing I want.
I want to login/readXml the consumption/mode if
my tv is on.
So, to see/read which mode is active...aftera "./rcsamy-arm 192.168.178.5 KEY_ESAVING"...
(to change it automaitcly in the evening!)
(
btw
the TV is pingable in some intervals even if power is OFF...
this check-script is running and logged too for some devices(tv and Gsm/tel) on my raspi...
)
So any ideas?
Not possible to read the power-state or systeminfos?
regards
schaschix
that's not the thing I want.
I want to login/readXml the consumption/mode if
my tv is on.
So, to see/read which mode is active...aftera "./rcsamy-arm 192.168.178.5 KEY_ESAVING"...
(to change it automaitcly in the evening!)
(
btw
the TV is pingable in some intervals even if power is OFF...
this check-script is running and logged too for some devices(tv and Gsm/tel) on my raspi...
)
So any ideas?
Not possible to read the power-state or systeminfos?
regards
schaschix