I'm trying to hack my UE32C6500 tv (firmware T-VALDEUC, revision 3018).
I followed these guides:
http://wiki.samygo.tv/index.php5/This_i ... ve_to_read
http://wiki.samygo.tv/index.php5/Hack_o ... es_models)
and I obtained the "run.ok" file on my usb pendrive. This seems to indicate that the hack has been applied.
Unfortunately, I'm not able to connect to my tv via telnet or ssh.
I also tried to install SamyGO Extensions, both on the same ext3 formatted pendrive and on a vfat formatted one.
I created the SamyGO Estensions pendrive using this guide:
http://wiki.samygo.tv/index.php5/Hack_o ... es_models) (Section "Insert SamyGO Extensions")
On this second pendrive I have SamyGO Extensions and the following run.sh file:
Code: Select all
#!/bin/sh date > /dtv/usb/sda/run.ok # I tried this launch command: /dtv/usb/sda1/SamyGO/rcSGO >/dev/null 2>&1 & # And also this one: # sh -x $1/SamyGO/rcSGO $1/SamyGO > /dtv/rcSGO_out 2>&1 &
- I apply the hack (by importing modded channel list, then by cloning settings from USB to TV in the Hotel mode menu). This is done with an ext3 formatted pendrive. The file run.ok is created.
- Then, within the time limit I set in link2 (900ms - 15 mins), I remove the first pendrive and insert the vfat formatted one.
- After a couple of minutes I try to connect with telnet.
After two days of experiments I'm really out of clues.
Can someone help me?