JU7100 bootup console output

Ideas and dreaming will go this forum
Post Reply

summiter
Posts: 6
Joined: Mon Jul 27, 2015 8:02 pm

JU7100 bootup console output

Post by summiter » Mon Jul 27, 2015 9:46 pm

JU7100 bootup console output. I ran a manual FW check while logging so that should show up in the logs. Haven't had time to look at this in depth yet, but figured it would be interesting to others. Snippet below, full log attached.

Code: Select all

1 T 8 R AAR 1201 1203 (Mar 11 2015-14:08:51) N S003 0
SECOS[1]
0020.16
Kernel[1]
DTB[1]
C[6] O[O] B[O]
E[4] 
Loading Kernel Done..
[0-0.0000] sdp_clk_register_fixed_div: failed to register clock emac_clk
[0-0.0003] [VDLP] preset_lpj manual set to 98304
[1-0.0287] [VDLP] preset_lpj manual set to 98304
[2-0.0366] [VDLP] preset_lpj manual set to 98304
[3-0.0445] [VDLP] preset_lpj manual set to 98304
[2-0.0619] sdp-uart-micom 190ac0.serial: device3 did not registered completely
[0-0.1110] netif_napi_add() called with weight 256 on device eth%d
[0-0.1492] type=2000 audit(0.144:1): initialized
[0-0.1838] sdp_cpufreq_init: failed to get cpu regulator
[0-0.1963] ================================================================================
[0-0.2029]  SAMSUNG VDLP Kernel
[0-0.2058]  Version : 0134, release
[0-0.2090]  Platform information : 150707, DTV, Hawk.M-Tizen, release, HawkAll_ATSC_RCA
[0-0.2174] ================================================================================
[0-0.2653] vdfs3
Checking system bus transport...
Kdbus system bus found!
[0-0.4569] vdfs3
FP_NVRAM_FASTBOOT_IN_PRODUCTION [0]
non-factory production mode
After production mode
/usr/apps/fastboot/bin/fb.sh: line 4: /opt/usr/apps/libave/libavePreload: No such file or directory
[FB:INIT] fast init start
/usr/apps/fastboot/bin/fb.sh: line 9: /usr/bin/tv-viewer.sh: No such file or directory
[FB:INIT] drviver path is [/lib/modules/3.10.30/kernel]
[FB:INIT] fi_util_mq_create: name(/fb_init_mq)
[FB:INIT] fi_util_mq_create: name(/fb_logo_mq)
[FB:INIT] fi_util_mq_create: name(/fb_video_mq)
[FB:INIT] fi_util_mq_create: name(/fb_sbb_mq)
[FB:INIT] init mutex
vco[0-0.6147] vdfs3
nf-init start
[0-0.6676] kfactory_drv_api mod ld(0xbe400000)
[1-0.6906] kfactory_drv mod ld(0xbe403000)
[FB:INIT] load_drivers_insmod thread end(11)
[FB:INIT] fl_callback_driver
[3-0.7119] 
[3-0.7119] TZTV MEDIA version : tztv-media-hawkm-atsc-rca-150708
[2-0.7502] tztv_tuner_drv_atsc mod ld(0xbe41e000)
[3-0.7947] sdp-i2c 1901a0.i2c: [i2c fail] CH:5 Device ID:0x80 incomplete xfer (-6)
Started Xorg[278]WARNING: Xorg is setuid root - bummer.starting X server with: "/usr/bin/Xorg :0 -nolisten tcp -noreset -ac -r +accessx 0 -sharevts +dpmsphone -dumbSched vt1"[0-0.9453] sdp_fw mod ld(0xbe4c8000)
[FB:INIT] load_drivers_insmod thread end(12)
[FB:INIT] fl_callback_driver
[FB:INIT] fl_callback_driver: not handling(12)
- same version : T-HKMAKUC-1222.4
[kfactoryd] KfactoryD_Main(v0.8)..
[3-1.0817] This is NOT BOE panel!(65D1UU7VJ)
[1-1.0822] printk default level set to debug.
[1-1.0876] sdp-jpeg a80000.sdp_jpeg: probe()
[1-1.0877] sdp-jpeg a80000.sdp_jpeg: irq = 112
[1-1.0936] [GetTunerType] [CES MODE : 0]
[1-1.0944] V4L2 dev map 'video40' => 'sdp-jpeg'
[1-1.0945] sdp-jpeg a90000.sdp_jpeg: probe()
[1-1.0946] sdp-jpeg a90000.sdp_jpeg: irq = 113
[1-1.0951] V4L2 dev map 'video41' => 'sdp-jpeg'
[1-1.0951] [ERROR] menu number 34 is already reserved.
[1-1.0967] V4L2 dev map 'video20' => 'sdp_av_atv_scart_extin'
[1-1.0972] V4L2 dev map 'video24' => 'sdp_comp_extin'
[1-1.0972] [SOC_EXTIN][2458] Component power off
[1-1.0973] V4L2 dev map 'video30' => 'sdp-hen-enc0'
[1-1.0973] sdp-hen ac0000.sdp_hen: encoder registered as /dev/video30
[1-1.0985] V4L2 dev map 'video62' => 'sdp-uddec-dec0'
[1-1.0988] --[set_tsd_clk_enable]getting function...[-6]
[1-1.0998] V4L2 dev map 'video60' => 'sdp-hevc-dec'
[1-1.0998] sdp-hevc b40000.sdp_hevc: decoder registered as /dev/video60
[1-1.1002] V4L2 dev map 'video61' => 'sdp-hevc-dec'
[1-1.1002] sdp-hevc b40000.sdp_hevc: decoder registered as /dev/video61
[1-1.1002] --[set_tsd_clk_enable]getting function...[-6]
[1-1.1004] @probe_time/sdp_codec/132/msec
[1-1.1004] sdp_codec mod ld(0xbe8eb000)
[1-1.1191] [SOC_EXTIN][206] av/atv power off (input type:0)
[1-1.1191] @probe_time/sdp_extin/160/msec
[1-1.1194] sdp_extin mod ld(0xbe8d8000)
[0-1.1344] @kfactory num_of_ci[0]
[0-1.1346] [ERROR] menu number 15 is already reserved.
[0-1.1352] [ERROR] menu number 15 is already reserved.
[0-1.1357] [ERROR] menu number 15 is already reserved.
[0-1.1362] [ERROR] menu number 15 is already reserved.
[0-1.1374] [ERROR] menu number 15 is already reserved.
[0-1.1381] @probe_time/sdp_tsd/8/msec
[0-1.1382] sdp_tsd mod ld(0xbe918000)
[1-1.1472] ExtTuner Select!!!
[1-1.1472] [Auto Tuner Detect][13st Tuner is detected][Demod:1]
[1-1.1472] TunerDetect = [13]
[1-1.1472] TDaTuner Create 13,0
[1-1.1472] TDTunerInstanceList::Create (TunerSelect:13)(Current:0)
[1-1.1472] [Instance][25]
[1-1.1472] APITunerObject Create
[1-1.1472] [Check][Instance][38][iCurrentTuner:0][pTunerObject:d4678200]
[1-1.1472] 	[Check][Instance][46][iCurrentTuner:0][pTunerObject:d4678200]
[1-1.1472] m_poAPITunerObject = d4678200 ,  (null),  (null),  (null)Tuner  Building...
[1-1.1472] Demodulator Building
[1-1.1472] This is Create Function 0,ExtTunerProcess:4
[1-1.1472] [TDsS_TDA18275A::Create()] Device Init 
[0-1.1523] sdp-uart-micom 190ac0.serial: TV Side MICOM version 1023(0), JP Side MICOM version 0000(0)
[3-1.3054] @probe_time/sdp_logo/596/msec
[3-1.3089] sdp_logo mod ld(0xbe417000)
[FB:INIT] load_drivers_insmod thread end(3)

X.Org X Server 1.13.0[FB:INIT] load_drivers_insmo[1-1.3213] [sdp_logo_dp_lvds_set][282] lvds format reg 0x101
d thread end(1)

Release Date: 2012-09-05
[kfactoryd] set_node_labeling done(ret:0)..
[FB:INIT] fl_callback_driver
X Protocol Version 11, Revision 0
[FB:INIT] fl_callback_driver
[FB:INIT] fi_util_mq_send_cmd: cmd(102)
[FB:INIT] fi_util_mq_send_cmd: cmd(104)
Build Operating System: Linux 3.11.0-15-generic armv7l SLP(Samsung Linux Platform)
Current Operating System: Linux (none) 3.10.30 #3 SMP PREEMPT Tue Jul[1-1.3627] tztv_frc_tcon_api mod ld(0xbe95e000)
[3-1.3681] usb_common mod ld(0xbe415000)
 7 02:00:30 UTC 2015 armv7l
Ker[3-1.3739] V4L2 dev map 'video21' => 'sdp-hdmi'
[1-1.3756] tztv_audio_amp_api mod ld(0xbe9d8000)
[3-1.3823]   [HDMIRX] Oneshot power down done for port0  
[1-1.3865] tztv_frc_tcon probe start
[1-1.3875] tztv_gpio_init_tcon_i2c_en
[1-1.3875] tztv_gpio_init_tcon_temp_sel Skip. Not HawkP
[1-1.3983] tztv_get_panel_type : [65D1UU7VJ]
[0-1.3986]  ::DBG_DVFS:: HawkM ASV : GPU tmcb : 39, RESULT : group 2 
[1-1.3987] tztv_get_svc_panel_year : [-1]
[1-1.3987] [detect_tcon] PANEL_TYPE [65D1UU7VJ] / TCON CLASS [35] / TCON YEAR [3] DETECTED !!!
[1-1.3987] module_name: hawkuft_tcon.ko
[0-1.4005] @probe_time/mali/4/msec
[0-1.4005] mali mod ld(0xbea44000)
n[0-1.4337]   [HDMIRX] Oneshot power down done for port1  
[3-1.4375] [Tuner Init][0][Start:1144][End:1428][Take Time][284]
[3-1.4376] This Tuner does not have API_GetSupportSatellte function. default Settings...
[3-1.4376] [ptSupportSatellite][0][0][0]
[3-1.4377] m_poTunerObject 0 createdm_poDemodulatorObject 0 createdTuner 0 attach
[3-1.4377] sdp-dvb dvb.15: DVB: registering adapter 0 frontend 0 (TZTV TUNER)...
[3-1.4381] V4L2 dev map 'video50' => 'TZTV TUNER'
[3-1.4381] Tuner V4L2 device registered
[3-1.4381] @probe_time/tztv_tuner/660/msec
[3-1.4382] tztv_tuner_atsc mod ld(0xbe4c0000)
[0-1.4880]   [HDMIRX] Oneshot power down done for port2  
el command line: dt[0-1.4972]   [HDMIRX] Oneshot power down done for port3  
sversion=All_ATS[0-1.5048]  [HDMIRX][link1] : uldhrx_connect_port [port0] is connected to [link1] on boot-time!!!
[3-1.5085] usbcore: registered new interface driver usbfs
[3-1.5086] usbcore: registered new interface driver hub
[3-1.5086] create_run_kthread kthread_run executing for thread name user_port_thread
[2-1.5261] hawkuft_tcon mod ld(0xbebc4000)
[1-1.5266] Result of loading tcon driver, tcon_loaded=[1]
[1-1.5268] 
[1-1.5268] [FRC Init Start]
[3-1.5364] usbcore: registered new device driver usb
[3-1.5365] usbcore mod ld(0xbeba0000)
[1-1.5365] ucData[0]=[0xe], ucData[1]=[0x11]
[1-1.5365] frc hawk-uft
[1-1.5365] 
[1-1.5365] [FRC Init End]
[1-1.5365] module_name: hawkuft_frc.ko
[0-1.5673] @probe_time/sdp_hdmi/196/msec
[1-1.5678] amp probe & init start... [build: Jul 10 2015 06:29:22] d0
[1-1.5678] [T2D_DBG] [sdp_alsa_amp] enter tztv_amp_serdes_lock_check
[1-1.5678] [T2D_DBG] SP_A>>De[AmpBuilder] AmpDetection: AMP Detection : ID_AMP_NAME_NTP7415(__HAWKM__)
[3-1.5724] hawkuft_frc mod ld(0xbebe3000)
[1-1.5729] Result of loading frc driver, frc_loaded=[1]
[1-1.5732] hawk-uft init check[OK],val[0x2],retry[0]
[1-1.5737] [HAWK-UFT] m_hawkuft_set_model_type: fw_type:[0x624c][120Hz][UFT],ld_type:[0x0431]
[1-1.5751] [T2D_DBG] SP_A>>De[AmpBuilder] SetAmpReset: AMP AmpNReset Start
[1-1.5753] [HAWK-UFT] SetEOSD: [ON]
[1-1.5758] [HAWK-UFT] m_hawkuft_send_cmd: CMD Not Ready[retry Count = 0][vx1 init try = 0x0000]
[1-1.5765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[1-1.5766] can't get samsung,ehci-gpr_reg
[1-1.5767] sdp-ehci 500000.ehci: SDP EHCI Host Controller
[1-1.5768] Going to Start HDMI task [chip0, link1] Task bIsStarted = 1 
[1-1.5768]  
[1-1.5768] creating file 'devices'creating file '001'
[1-1.5768] sdp-ehci 500000.ehci: new USB bus registered, assigned bus number 1
[1-1.5770] sdp-ehci 500000.ehci: irq 43, io mem 0x00500000
[1-1.5773] [T2D_DBG] SP_A>>De[AmpBuilder] SetAmpReset: AMP RESET SUCCESS in HawkP/HawkM via Micom : cnt[0]
[1-1.5843]  PORT0 [deglitch_filt_clk_det,primary_clk_det,opt_clk_det][0,0,0] :  CLK DET MISSED!!  
[2-1.5890] [HAWK-UFT][TCON][t_Tcon_SetPanelInfo] : [t_Tcon_SetPanelInfo][Start] : PanelType[65D1UU7VJ] / TconYear[3] / SvcPanelYear[-1]
[2-1.5890] [HAWK-UFT][TCON][t_Tcon_SetPanelInfo] : Original Panel File Name J65D1UU7VJ_3D
[2-1.5890] [HAWK-UFT][TCON][t_Tcon_SetPanelInfo] : [t_Tcon_SetPanelInfo][End] : PanelType[65D1UU7VJ] / m_strPanelName[J65D1UU7VJ_3D]
[1-1.5963] sdp-ehci 500000.ehci: USB 2.0 started, EHCI 1.00
[1-1.5964] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[1-1.5964] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[1-1.5964] usb usb1: SerialNumber: 500000.ehci
[1-1.5971] hub 1-0:1.0: USB hub found
[1-1.5971] hub 1-0:1.0: 1 port detected
[1-1.5974] creating file '001'can't get samsung,ehci-gpr_reg
[1-1.5974] sdp-ehci 510000.ehci: SDP EHCI Host Controller
[1-1.5974] creating file '002'
[1-1.5975] sdp-ehci 510000.ehci: new USB bus registered, assigned bus number 2
[1-1.5976] sdp-ehci 510000.ehci: irq 45, io mem 0x00510000
[1-1.6086] sdp-ehci 510000.ehci: USB 2.0 started, EHCI 1.00
[1-1.6087] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[1-1.6087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[1-1.6087] usb usb2: SerialNumber: 510000.ehci
[1-1.6093] hub 2-0:1.0: USB hub found
[1-1.6093] hub 2-0:1.0: 1 port detected
[1-1.6099] creating file '001'can't get samsung,ehci-gpr_reg
[1-1.6099] sdp-ehci 520000.ehci: SDP EHCI Host Controller
[1-1.6099] creating file '003'
[1-1.6099] sdp-ehci 520000.ehci: new USB bus registered, assigned bus number 3
[1-1.6103] sdp-ehci 520000.ehci: irq 47, io mem 0x00520000
[3-1.6126] [T2D_DBG] audio base[0xa00000], size[0x12000]
[3-1.6126] auddec base[0xb74000], size[0x300]
[3-1.6126] [T2D_DBG] audio clkbase[0x5c0000], size[0x1000]
[3-1.6126] [T2D_DBG] xroadreg base[0xf00000], size[0x240]
[3-1.6126] [T2D_DBG] xroadreg base[0xe13000], size[0x300]
[3-1.6126] [T2D_DBG] gpio virtual base[0xfe4c1000]
[3-1.6126] [T2D_DBG] audio aio irq[102]
[3-1.6126] [T2D_DBG] audio ae irq[103]
[1-1.6152] [T2D_DBG] SP_A>>De[AmpBuilder] SetAmpReset: AMP AmpNReset end
[1-1.6152] end amp reset
[1-1.6152] [T2D_DBG] [sdp_alsa_amp] num of amp : 1, subwoofer_support: 0
[1-1.6152] [T2D_DBG] [sdp_alsa_amp] start main
[1-1.6153] [T2D_DBG] SP_A>>De[NTP7415_Main] Create: <IN> eCreateType(0)
[3-1.6164] AUDIO PLL0 PMS  -addr[005C0014][00308302] 
[3-1.6164]  AUDIO PLL1 PMS  -addr[005C0018][00308302] 
[3-1.6164]  AUDIO PLL0,1 K  -addr[005C002C][126F126F] 
[3-1.6164]  AUDIO C_MUX1  *addr[005C0100][00000000] 
[3-1.6164]  AUDIO C_MUX2  *addr[005C0104][00000000] 
[3-1.6164]  AUDIO PSCAL0 -addr[005C00C4][001701FF] 
[3-1.6164]  AUDIO PSCAL1 -addr[005C00C8][01011717] 
[3-1.6164]  AUDIO PSCAL2 -addr[005C00CC][17050517] 
[3-1.6164]  
[3-1.6164] [T2D_DBG] Creating the MpegEnc0 mutex was Succeeded.
[1-1.6246] sdp-ehci 520000.ehci: USB 2.0 started, EHCI 1.00
[1-1.6247] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[1-1.6247] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[1-1.6247] usb usb3: SerialNumber: 520000.ehci
[1-1.6252] hub 3-0:1.0: USB hub found
[1-1.6252] hub 3-0:1.0: 1 port detected
[3-1.6255] [HAWK-UFT] m_hawkuft_compare_fw_version: file version:[0x624c],f/w version:[0x624c]
[3-1.6255] [HAWK-UFT] m_hawkuft_firmware_upgrade: Skip Firmware File Upgrade
[1-1.6255] creating file '001'can't get samsung,ehci-gpr_reg
[1-1.6255] sdp-ehci 530000.ehci: SDP EHCI Host Controller
[1-1.6255] creating file '004'
[1-1.6256] sdp-ehci 530000.ehci: new USB bus registered, assigned bus number 4
[1-1.6257] sdp-ehci 530000.ehci: irq 49, io mem 0x00530000
[3-1.6259] [T2D_DBG] *=*=*=*= Muted in BootUp sequence. If NO Sound, Check the UNMUTE(Dec Mute also) !!! *=*=*=*=
[3-1.6260] sdp_audio_aio_i2stx_start I2S[0] SET SCART CHANNEL
[3-1.6264] [sdp_alsa][dev_audio_aio_startspdifout][call:insmod] dev:0 map:70 clk:0 codec:0
[1-1.6366] sdp-ehci 530000.ehci: USB 2.0 started, EHCI 1.00
[1-1.6367] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[1-1.6367] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[1-1.6367] usb usb4: SerialNumber: 530000.ehci
[1-1.6381] hub 4-0:1.0: USB hub found
[1-1.6381] hub 4-0:1.0: 1 port detected
[1-1.6387] creating file '001'
[1-1.6387] ehci_hcd mod ld(0xbebfb000)
[3-1.6397] [T2D_DBG] snd_sdp_mc_probe called
[3-1.6400] sdp-codec sdp-codec.2: ASoC: Failed to create capture debugfs file
[3-1.6400] sdp-codec sdp-codec.2: ASoC: Failed to create capture debugfs file
[3-1.6402] [T2D_DBG] sdp_audio_add_dtv_control++
[3-1.6403] [sdp_alsa][main_out_gain_put][call:insmod] MAIN Output volume[100] MainOutMuteState[1]
[3-1.6403] [T2D_DBG] auipcm_mix_gain_put: This function is not supported anymore. [pid:351,insmod].
[3-1.6409] sdp-mc-audio sdp-mc-audio.5:  SDP Codec Speaker <-> npp-cpu-dai mapping ok
[3-1.6410] sdp-mc-audio sdp-mc-audio.5:  Main Codec Speaker <-> main-cpu-dai mapping ok
[3-1.6412] sdp-mc-audio sdp-mc-audio.5:  Remote Codec Speaker <-> remote-cpu-dai mapping ok
[3-1.6414] sdp-mc-audio sdp-mc-audio.5:  PP Codec Speaker <-> pp-cpu-dai mapping ok
[3-1.6415] sdp-mc-audio sdp-mc-audio.5:  Remote1 Codec Speaker <-> remote1-cpu-dai mapping ok
[3-1.6420] sdp-mc-audio sdp-mc-audio.5:  pcmdump0 codec <-> pcmdump0-cpu-dai mapping ok
[3-1.6422] sdp-mc-audio sdp-mc-audio.5:  pcmdump1 codec <-> pcmdump1-cpu-dai mapping ok
[3-1.6424] sdp-mc-audio sdp-mc-audio.5:  pcmdump2 codec <-> pcmdump2-cpu-dai mapping ok
[3-1.6436] [T2D_DBG] successfully exited probe
[3-1.6441] [T2D_DBG] sdp_sif_platform_probe++
[3-1.6443] [T2D_DBG] sdp_sif_machine_probe++
[3-1.6451] @kfactory id_tuner[13]
[3-1.6454] @kfactory region(2), sif area(1)
[3-1.6456] @kfactory sif_carrier_mute(1)
[3-1.6457] @kfactory sif_high_deviation(0)
[3-1.6459] @kfactory sif_pilot_level_high_thld(32)
[3-1.6462] @kfactory sif_pilot_level_low_thld(16)
[3-1.6462] [sdp_alsa][sdp_sif_machine_probe][call:insmod] [SIF] Factory Option 
[3-1.6462] [sdp_alsa][sdp_sif_machine_probe][call:insmod] [SIF] TunerType = NXP Tuner 
[3-1.6462] [sdp_alsa][sdp_sif_machine_probe][call:insmod] [SIF] SoundSys = SoundSys_1
[3-1.6462] [sdp_alsa][sdp_sif_machine_probe][call:insmod] [SIF] High Devi = OFF 
[3-1.6462] [sdp_alsa][sdp_sif_machine_probe][call:insmod] [SIF] Carrier Mute = ON 
[3-1.6462] [sdp_alsa][sdp_sif_machine_probe][call:insmod] [SIF] Pilot Level High Thld = 0x2000 
[3-1.6462] [sdp_alsa][sdp_sif_machine_probe][call:insmod] [SIF] Pilot Level Low Thld = 0x1000 
[3-1.6467] [T2D_DBG] sdp_pcm_new: snd_card = d3ac8c00
[3-1.6467] sdp-mc-sif sdp-mc-sif.10:  SIF Codec <-> sif-cpu-dai mapping ok
[3-1.6468] compress asoc: Compress Main0 Codec <-> Compress-main0-cpu-dai mapping ok
[3-1.6472] compress asoc: Compress Main1 Codec <-> Compress-main1-cpu-dai mapping ok
[3-1.6473] compress asoc: Compress Sub0 Codec <-> Compress-sub0-cpu-dai mapping ok
[3-1.6475] compress asoc: Compress Sub1 Codec <-> Compress-sub1-cpu-dai mapping ok
[3-1.6476] compress asoc: Compress Third0 Codec <-> Compress-third0-cpu-dai mapping ok
[3-1.6477] compress asoc: Compress Third1 Codec <-> Compress-third1-cpu-dai mapping ok
[3-1.6478] compress asoc: Compress SPDIF <-> SPDIF-cpu-dai mapping ok
[3-1.6479] compress asoc: Compress REMOTE0 <-> REMOTE0-cpu-dai mapping ok
[3-1.6480] compress asoc: Compress REMOTE1 <-> REMOTE1-cpu-dai mapping ok
[3-1.6492] [T2D_DBG] sdp_sif_machine_probe--
[3-1.6494] @probe_time/sdp_alsa/40/msec
[3-1.6495] [T2D_DBG] sdp-audio driver ver 0.1 registerd
[3-1.6495] sdp_alsa mod ld(0xbec07000)
[3-1.6636] [T2D_DBG] SP_A>>De[NTP7415_Main] SetPeqTableConfig: eType : 1
[3-1.6636] [T2D_DBG] SP_A>>De[NTP7415_Main] SetPeqTableConfig: pPeqFilePath : /lib/firmware/amp/2015/15_NTP7415_116_TW.PEQ
[1-1.6698] xhci-hcd 400000.xhci: xHCI Host Controller
[1-1.6698] creating file '005'
[1-1.6698] xhci-hcd 400000.xhci: new USB bus registered, assigned bus number 5
[1-1.6701] xhci-hcd 400000.xhci: irq 42, io mem 0x00400000
[1-1.6702] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[1-1.6702] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[1-1.6702] usb usb5: SerialNumber: 400000.xhci
[1-1.6708] hub 5-0:1.0: USB hub found
[1-1.6708] hub 5-0:1.0: 1 port detected
[1-1.6710] creating file '001'
[1-1.6710] xhci-hcd 400000.xhci: xHCI Host Controller
[1-1.6710] creating file '006'
[1-1.6710] xhci-hcd 400000.xhci: new USB bus registered, assigned bus number 6
[1-1.6711] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[1-1.6711] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[1-1.6711] usb usb6: SerialNumber: 400000.xhci
[1-1.6729] hub 6-0:1.0: USB hub found
[1-1.6729] hub 6-0:1.0: 1 port detected
[1-1.6733] creating file '001'
[1-1.6733] xhci_hcd mod ld(0xbeec2000)
[3-1.6742] [T2D_DBG] SP_A>>De[NTP7415_Main] t_ParsingPeqFile: <Out> Success
[3-1.6742] [T2D_DBG] SP_A>>De[NTP7415_Main] SetPeqTableConfig: <Out> success t_ParsingPeqFile in normal peq
[3-1.6854] [HAWK-UFT] m_hawkuft_compare_ld_version: file ld: type[0x0431] ver[0x03],f/w ld:type[0x0431] ver[0x03]
[3-1.6854] [HAWK-UFT] m_hawkuft_ld_upgrade: Skip LD Upgrade
[2-1.6906] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[2-1.6947] sdp-ohci 508000.ohci: SDP OHCI Host Controller
[2-1.6948] creating file '007'
[2-1.6948] sdp-ohci 508000.ohci: new USB bus registered, assigned bus number 7
[2-1.6952] sdp-ohci 508000.ohci: irq 44, io mem 0x00508000
[3-1.6978] [T2D_DBG] SP_A>>De[NTP7415_Main] SetPeqTableConfig: eType : 1
[3-1.6978] [T2D_DBG] SP_A>>De[NTP7415_Main] SetPeqTableConfig: pPeqFilePath : /lib/firmware/amp/2015/15_NTP7415_116_TW.PEQ
[3-1.6978] [T2D_DBG] SP_A>>De[NTP7415_Main] SetPeqTableConfig: eType : 1
[3-1.6978] [T2D_DBG] SP_A>>De[NTP7415_Main] SetPeqTableConfig: pPeqFilePath : /lib/firmware/amp/2015/15_NTP7415_116_TW.PEQ
[3-1.6981] [T2D_DBG] SP_A>>De[NTP7415_Main] SetMute: <IN>eMuteType(1), bMute(1)
[3-1.6983] [T2D_DBG] SP_A>>De[NTP7415_Main] Create: AMP[0] init Success
[3-1.6983] [T2D_DBG] SP_A>>De[NTP7415_Main] SetMute: <IN>eMuteType(1), bMute(1)
[3-1.6985] [T2D_DBG] [sdp_alsa_amp] end main : 1
[3-1.6985] [T2D_DBG] [sdp_alsa_amp] @tztv_amp_init time(120 ms)
[3-1.6988] register ALSA controls...[50]
[3-1.6989] amp probe & init finish... [build: Jul 10 2015 06:29:22] d0
[3-1.6989] @probe_time/tztv_audio_amp/120/msec
[3-1.6991] tztv_audio_amp mod ld(0xbebdc000)
[1-1.7027] [SDP-DRM] Built: Jul  9 2015, time: 11:12:50.
[1-1.7156] This is NOT BOE panel!(65D1UU7VJ)
[1-1.7193] DRM-DP: sub sync off, (outpath:WINDOW) [364:insmod]
[1-1.7193] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[1-1.7193] [drm] No driver support for vblank timestamp query.
[1-1.7195] [drm] Initialized sdp 1.0.0 20130430 on minor 0
[1-1.7200] [drm] Initialized sdp_drm_capture 1.0.0 20141031 on minor 1
[1-1.7201] sdp_drm mod ld(0xbeda4000)
[3-1.7253] [HAWK-UFT][TCON][UpgradeDemuraFirmware] : Start Demura Firmware Upgrade 
[3-1.7364] [HAWK-UFT][TCON][m_demura_upgrade] : [Demura] Check Demura F/W status normal or not. Address:[82] status:[70][8]
[2-1.7512] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[2-1.7512] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[2-1.7512] usb usb7: SerialNumber: 508000.ohci
[2-1.7517] hub 7-0:1.0: USB hub found
[2-1.7517] hub 7-0:1.0: 1 port detected
[2-1.7519] creating file '001'
[2-1.7519] sdp-ohci 518000.ohci: SDP OHCI Host Controller
[2-1.7519] creating file '008'
[2-1.7519] sdp-ohci 518000.ohci: new USB bus registered, assigned bus number 8
[2-1.7519] sdp-ohci 518000.ohci: irq 46, io mem 0x00518000
[3-1.7671] [HAWK-UFT][TCON][m_demura_upgrade] : [Demura] file_path : /lib/firmware/tcon/hawkuft_tcon/ 
[3-1.7671] [HAWK-UFT][TCON][m_demura_upgrade] : [Demura] file_name : /lib/firmware/tcon/hawkuft_tcon/HawkUFT_DEMURA.bin 
[3-1.7701] [HAWK-UFT][TCON][m_demura_upgrade] : [Demura] fw_path : /lib/firmware/tcon/hawkuft_tcon/HawkUFT_DEMURA.bin 
[3-1.7701] [HAWK-UFT][TCON][m_demura_upgrade] : [Demura] fw_data_size : [20048] 
[3-1.7712] [HAWK-UFT][TCON][m_demura_upgrade] : [Demura] Check File New Version : [0x640d], Current Version : [0x640d]
[3-1.7712] [HAWK-UFT][TCON][m_demura_upgrade] : [Demura] Firmware Version is Same!!!
[3-1.7712] [HAWK-UFT][TCON][m_demura_upgrade] : [Demura] Skip Firmware File Upgrade
[3-1.8050] @probe_time/frc-tcon/420/msec
[3-1.8051] tztv_frc_tcon mod ld(0xbea34000)
[1-1.8168] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[1-1.8168] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[1-1.8168] usb usb8: SerialNumber: 518000.ohci
[1-1.8172] hub 8-0:1.0: USB hub found
[1-1.8172] hub 8-0:1.0: 1 port detected
[1-1.8174] creating file '001'
[1-1.8174] sdp-ohci 528000.ohci: SDP OHCI Host Controller
[1-1.8174] creating file '009'
[1-1.8174] sdp-ohci 528000.ohci: new USB bus registered, assigned bus number 9
[1-1.8175] sdp-ohci 528000.ohci: irq 48, io mem 0x00528000
[3-1.8731] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[3-1.8731] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[3-1.8731] usb usb9: SerialNumber: 528000.ohci
[3-1.8735] hub 9-0:1.0: USB hub found
[3-1.8735] hub 9-0:1.0: 1 port detected
[3-1.8737] creating file '001'
[3-1.8737] sdp-ohci 538000.ohci: SDP OHCI Host Controller
[3-1.8737] creating file '010'
[3-1.8737] sdp-ohci 538000.ohci: new USB bus registered, assigned bus number 10
[3-1.8737] sdp-ohci 538000.ohci: irq 50, io mem 0x00538000
[3-1.9404] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[3-1.9404] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[3-1.9404] usb usb10: SerialNumber: 538000.ohci
[3-1.9408] hub 10-0:1.0: USB hub found
[3-1.9409] hub 10-0:1.0: 1 port detected
[3-1.9412] creating file '001'
[3-1.9412] ohci_hcd mod ld(0xbeed6000)
[3-1.9617] usbcore: registered new interface driver usb-storage
[3-1.9617] usb_storage mod ld(0xbeedd000)
[1-2.1765] usb 2-1: new high-speed USB device number 2 using sdp-ehci
[1-2.1985] TMU: init state is 1(58'C)
[1-2.2043] zram: < ZRAM Modular version : 0002 2015/03/17 >
[1-2.2168] zram: Created 4 device(s) ...
[1-2.2169] zram mod ld(0xbeee7000)
[2-2.2891] tzdev version [007.0]
[3-2.2968] tzdev mod ld(0xbeeee000)
[2-2.3076] udevd[408]: starting version 182
[1-2.3091] usb 2-1: New USB device found, idVendor=0a5c, idProduct=bd27
[1-2.3092] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1-2.3092] usb 2-1: SerialNumber: 000000000001
[1-2.3235] creating file '002'
[1-2.3235] create_run_kthread kthread_run executing for thread name instant thread
[1-2.3272] create_run_kthread kthread_run executing for thread name instant thread
[1-2.3747] Adding 409596k swap on /dev/zram0.  Priority:-1 extents:1 across:409596k SS
[1-2.4472] usb 3-1: new high-speed USB device number 2 using sdp-ehci
[1-2.4726] storage driver version [004.0]
[1-2.4726] ssdev mod ld(0xbeef6000)
[3-2.4963] storage_get_rpmb_status:rpmb status is ok.
[1-2.5069] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608
[1-2.5069] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[1-2.5140] hub 3-1:1.0: USB hub found
[1-2.5191] hub 3-1:1.0: 4 ports detected
[1-2.5671] creating file '002'C_RCA_002[libtbm:[0-3.0314] sdp_hdmi mod ld(0xbe97b000)
278] bufmgr init: fd=12
[1-3.0434] sdp_logo mod uld(0xbe417000)
[0-3.0493] [ft_set_inverter][off][flag:0][pid:496,fb_do_inmute_pr]
[0-3.0547] [HAWK-UFT] SetMute: [ON][496-fb_do_inmute_pr]
[libtbm:278] TBM module hawkm: vendor="Samsung" ABI=1,0
[libtbm:278] cache_crtl:BACKEND lock_crtl:BACKEND 
[libtbm:278] Success to load mod
[1-3.0795] usb 4-1: new high-speed USB device number 2 using sdp-ehci
[3-3.0821] tztv_hdmi_switch_api mod ld(0xbeefe000)
ule(libtbm_default.so)
[libtbm:278] create tizen bufmgr: ref_count:1
SW EXA enabled
default p[0-3.0995] In tizen_hdmi_sw_init
[0-3.1018] hdmi_switch:start register v4l2 dev !
[3-3.1033] of_node Name = usben
[3-3.1033] of_node Type = <NULL>
[3-3.1034] usb_enable mod ld(0xbe41c000)
[0-3.1157] V4L2 dev map 'video28' => 'hdmi_switch'
[0-3.1200] r_hdmi_switch_mutex_init
[0-3.1234] [HdmiSw]insmod[500]Construct TDsSocHdmiSwitch
[1-3.1282] usb 4-1: New USB device found, idVendor=05e3, idProduct=0608
[0-3.1283] [HdmiSw]insmod[500]Contruct TDsSII9777HdmiSwitch
[0-3.1287] [start_hdmi_switch_driver] sw_model 88
[0-3.1287] ###### HDMI TYPE bIsExtern[1] bIsOcm[1] HDMI SWITCH TYPE
[0-3.1287] ### HDMI SWITCH PROBE ### SW MODEL : HAWK EXTERNAL+OCL -> Set to Hawk Extaernal+OCL Switch Configuration 
[0-3.1345] |||||| OCM IS CONNECTED ||||||
[0-3.1345] [HdmiSw]insmod[500]Sii9777 m_iCreateType 8
[0-3.1361] [HdmiSw]insmod[500]
[0-3.1361]  m_HotplugOffHoldTime 6, m_HotplugSwitching 1, m_HotplugDuration 1, m_ClkTermDelay 3, m_iHdmiEq 0, m_HDCP_Enable 0, m_HDCP_Enable_Flag 85, m_iNumOfHDMI 4, m_HdmiPathType 23, m_HdmiIdentType 23, OFF_HOLD_TMIE 6
[0-3.1361] 
[0-3.1362] r_hdmi_switch_sem_init
[0-3.1362] r_hdmi_switch_mutex_init
[3-3.1367] [HdmiSw]insmod[500]Sii9777 Instance creation SUCCESS!
[3-3.1864] [HdmiSw]insmod[500]
[3-3.1864] [HdmiSw]insmod[500]Sii9777FirmwareVersionStatusGet	: 00008068
[3-3.1864] [HdmiSw]insmod[500]Sii9777 BOOT DONE(0)!!!
[1-3.2184] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[3-3.2223] [Sii9777] m_HotplugSwitching(1) m_HotplugDuration(800)
[1-3.2319] hub 4-1:1.0: USB hub found
[1-3.2355] hub 4-1:1.0: 4 ports detected
referred_mode = 1920x1080@60
ch[1-3.2415] creating file '002'eck support value = 0 support_2014 tv_year : 15 
[CompositeScreenInit] setup complete
xf86: found device 0
xf86: found device 0
[XSERVER] Success(/tmp/xorg_ready) 
[XSERVER] oom_score_adj: /proc/278/oom_score_adj, score_value: -1000
Error: could not load module /lib/modules/3.10.30/kernel/drivers/input/evdev.ko: No such file or directory
(II) [     3.296][XDBG][xDbgModulePa
[3-3.3091] [HdmiSw]insmod[500]HotPlug Set All Ports - HIGH
[3-3.3145] [HdmiSw]insmod[500]START HAWK-M ONBOARD BOSTON INIT
rseOptions] dlog: "off"
(II) [ [3-3.3234] [HdmiSw]insmod[500]Sii9777 OnBoard Instance creation SUCCESS!
    3.296][XDBG][xDbgModuleParseOptions] drv's log path: "/var/log/Xorg.0.log"
(II) [     3.296][XDBG][xDbgModuleParseOptions] evlog path: none
(II) [     3.296][XDBG][xDbgModuleParseOptions] evlog log path: none
[3-3.3764] [HdmiSw]insmod[500]
[3-3.3778] [HdmiSw]insmod[500]Sii9777FirmwareVersionStatusGet(MAIN)	: 00008068
[3-3.3847] [HdmiSw]insmod[500]Sii9777 BOOT DONE(0)!!!
[1-3.5122] [bptime] process open : app-boot-manage(401)
[3-3.5472] usb 7-1: new full-speed USB device number 2 using sdp-ohci
[3-3.5541] [HdmiSw]insmod[500]HotPlug Set All Ports - HIGH
[3-3.6212] [HdmiSw]insmod[500]Sii9777 Create DONE
[3-3.6255] ::::::::::::::::::: HDMI_9777 Create!!!
[3-3.6304] @probe_time/tztv_hdmi_switch/512/msec
[3-3.6333] tztv_hdmi_sw tztv_hdmi_sw: probe successful
[3-3.6394] tztv_hdmi_switch mod ld(0xbef39000)
[3-3.6508] tztv-jackident tztv_jackident.21: jackident drv probe [build: Jul  9 2015 11:05:39]
[3-3.6595] tztv-jackident tztv_jackident.21: @probe_time/jackident/12/msec
[3-3.6649] tztv_jackident mod ld(0xbe417000)
[FB:INIT] load_driv[1-3.6709] [sdp_alsa][sdp_audio_extin_hdmi_dec_put][call:fastvideo] HDMI_DEC [1] selected
[1-3.6784] [sdp_alsa][sdp_audio_extin_hdmi_put][call:fastvideo] HDMI_IN: ON [DEC:1]
[1-3.6864] [sdp_alsa][pcm_main_out_source_connect_put][call:fastvideo] [3-3.6872] @jackident changed[0x00000000 -> 0x80000000]
ers_insmod threaMAIN_OUT source 8 
d end(5)
[FB:INIT] fl_callback_driver
[FB:INIT] fi_util_mq_send_cmd: cmd(105)[1-3.7077] [sdp_alsa][dev_audio_aio_startspdifout][call:fastvideo] dev:0 map:70 clk:2 codec:0

[vendor-config] network_type[Wired]
WiFi -> false
Wired -> true
3G [1-3.7237] sdp_aio_adc_set_switch: input_source[8]
[1-3.7282] [T2D_DBG] [HDMI IN]:dev_audio_ae_setport: sourceType[11] spdifrxState[0]
-> false
[2-3.7458] [HAWK-UFT] SetSystemInfo: region=[2], hv_flip=[0], fdisplay_on_off=[0], pc_mode_on_off=[0]
[0-3.7465] [LMN] lv1 threshold set : 80 MB
[0-3.7466] [LMN] lv2 threshold set : 60 MB
[0-3.7467] [LMN] lv3 threshold set : 40 MB
[2-3.7648] [HAWK-UFT] SetSystemInfo: home_panel_frc=[1], shop_3d_cube=[0], panel_cell_init_time=[250], tcon_init_time=[-1106201704]
[0-3.7659] usb 7-1: New USB device found, idVendor=0a5c, idProduct=2045
[0-3.7659] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[0-3.7659] usb 7-1: SerialNumber: F8042E77E4F1
[0-3.7684] creating file '002'
[0-3.7684] create_run_kthread kthread_run executing for thread name instant thread
[0-3.7685] create_run_kthread kthread_run executing for thread name instant thread
[3-3.7781] [HdmiSw][SII9777][JackBoston:8068] EventFlags : 0x40000
[3-3.7932] [HdmiSw]Sii9777HandlerT[573]SII9777_EVENT_FLAGS__MHL_VERSION_CHNG : [MHL_NONE]
[2-3.8250] [HAWK-UFT] SetSystemInfo: btemidel_50_bon=[780], btemidel_50_mov=[780], btemidel_60_dyn=[780], btemidel_60_mov=[780]
[3-3.8254] [HdmiSw][SII9777][MainBoston:8068] EventFlags : 0x40000
[2-3.8421] [HAWK-UFT] SetSystemInfo: slavdelay48_bon=[375], slavdelay60_bon=[255], slavdelay48=[375], slavdelay60=[255]
[2-3.8527] [HAWK-UFT] SetSystemInfo: ssc_vx1_on_off=[0], ssc_vx1_period=[0], ssc_vx1_modulation=[0], ssc_lvds_on_off=[1]
[2-3.8633] [HAWK-UFT] SetSystemInfo: ssc_lvds_mfr=[3], ssc_lvds_mrr=[2], ssc_ddr_on_off=[1], ssc_ddr_period=[2]
[2-3.8731] [HAWK-UFT] SetSystemInfo: ssc_ddr_modulation=[2], ssc_ddr_mfr=[3], ssc_ddr_mrr=[4]
[2-3.8814] [HAWK-UFT] SetSystemInfo: frc_vx1_rx_eq=[1]
[2-3.8863] [HAWK-UFT] m_hawkuft_set_pivot: [0]
[3-3.8913] [HAWK-UFT] m_hawkuft_set_fdisplay: [OFF]
[3-3.8971] [HAWK-UFT] m_hawkuft_set_vx1_rx_eq: value:[1]
[0-3.9032] [HAWK-UFT] SetInputSize: 60Hz output
[1-3.9073] [HAWK-UFT] GetPanelInfo: panel info-width=[3840],height=[2160],vfreq_type=[120],support_3d=[1],support_pc_3d=[0],mute_for_gamemode=[1]
[3-3.9386] [HAWK-UFT][TCON][t_Tcon_CheckTCONStatus] : ?? TCON Access Success
[3-3.9465] [HAWK-UFT][TCON][m_HasATemperSensor] : m_HasATemperSensor 3372 Temp. sensor is available.
[1-3.9949] [sdp-gmac] eth0: Ethernet address fc:8f:90:bb:xx:xx
Set MAC Address of eth0 [fc:8f:90:bb:xx:xx][system-info] SYSTEM_INFO_WIFI_VENDOR_BRCM
[systme-info] wifi region from factory : 18
[vendor-config] vendor type --> 3
[vendor-config] region type --> 18
[vendor-config] network type --> 5
[vendor-config] Started to load Wifi Drivers
[3-4.0581] cfg80211: Calling CRDA to update world regulatory domain
[3-4.0638] cfg80211 mod ld(0xbef3f000)
[1-4.0848] launchpad_prelo (614): /proc/614/oom_adj is deprecated, please use /proc/614/oom_score_adj instead.
[2-4.0877] brcm_wlan_init: START.......
[2-4.0877] brcm_init_wlan_mem: WIFI MEM Allocated
[2-4.0877] brcm_wlan_init: brcm wlan mem alloc success.......
[2-4.0879] brcm_mem mod ld(0xbe4be000)
[0-4.0956] usb 3-1.1: new full-speed USB device number 3 using sdp-ehci
[xorg-launch-helper] platformlog flag[1] 

** (process:523): WARNING **: signal "power_on" (from "PowerOn") exported but not found in object class "NetconfigWifi"
[0-4.1783] dhd_module_init in
[0-4.1796] [dhd_module_init:8800] BRCM Wi-Fi Driver Init started from here.
[1-4.1876] found wifi platform device bcmdhd_wlan
[0-4.1899] usb 3-1.1: New USB device found, idVendor=046d, idProduct=0b04
[0-4.1899] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[3-4.1917] @jackident changed[0x80000000 -> 0x80001000]
[0-4.1952] AVS: SDP_TMU_AVS_ON
[0-4.1952] sdp_cpufreq_asv_notifier: cpu group=1
[0-4.1952] DVFS: CPU voltage table is setted with asv group 1
[0-4.1952]  @@@[gpufreq_asv_notifier]@@@ AVS ON!!!!!
[0-4.1952] TMU: change state: cold -> normal. 59'C
[0-4.1954] [T2D_DBG] dnse_eq_gain_put: DNSE eq volume 50 [pid:454,avocd]
[0-4.1955] [T2D_DBG] dnse_eq_gain_put: DNSE eq volume 50 [pid:454,avocd]
[0-4.1955] [T2D_DBG] dnse_eq_gain_put: DNSE eq volume 50 [pid:454,avocd]
[0-4.1956] [T2D_DBG] dnse_eq_gain_put: DNSE eq volume 50 [pid:454,avocd]
[0-4.1956] [T2D_DBG] dnse_eq_gain_put: DNSE eq volume 50 [pid:454,avocd]
[0-4.1956] [T2D_DBG] dnse_balance_put: volume 10 [pid:454,avocd]
[3-4.2001] [HdmiSw][SII9777][JackBoston:8068] EventFlags : 0x10
[3-4.2001] [HdmiSw]Sii9777HandlerT[573][JackBoston] SII9777_EVENT_FLAGS__PLUS_5V_CHNG
[3-4.2212] [HdmiSw]Sii9777HandlerT[573]    Rx0 : [0]
[0-4.2319] [T2D_DBG] dnse_srs_put (sound mode / dnse mode): enum 1 [pid:454,avocd]
[3-4.2412] [HdmiSw]Sii9777HandlerT[573]    Rx1 : [0]
[3-4.2571] [HdmiSw]Sii9777HandlerT[573]    Rx2 : [0]
[0-4.2712] [T2D_DBG] dnse_srs_put dnsd: value 0 [pid:454,avocd]
[0-4.2714] [T2D_DBG] dnse_auto_volume_level_mode_put: enum 0 [pid:454,avocd]
[3-4.2745] [HdmiSw]Sii9777HandlerT[573]    Rx3 : [1]
[0-4.3224] hub 3-1.1:1.0: USB hub found
[1-4.3254] [dbus_usbos_probe:1565] BRCM Wi-Fi Driver Enter dbus_usbos_probe.
[0-4.3266] hub 3-1.1:1.0: 3 ports detected
[0-4.3312] [T2D_DBG] spdiftx_delay_put: SPDIF Output delay 0 [pid:454,avocd]
[0-4.3313] creating file '003'
[0-4.3313] [sdp_alsa][dolby_compressed_dec0_mode_put][call:avocd] DEC0_DOLBY_C_MODE[0]
[0-4.3314] [sdp_alsa][dolby_compressed_dec1_mode_put][call:avocd] DEC1_DOLBY_C_MODE[0]
[0-4.3315] [T2D_DBG] dnse_delay_put: Main OutPut delay 73 [pid:454,avocd]
[0-4.3315] [T2D_DBG] monitor_delay_put: HP/LINE OutPut delay 73 [pid:454,avocd]
[0-4.3315] [sdp_alsa][bt_delay_main_put][call:avocd] bt_delay_main_put: MAIN BT/ACM Output delay 0 [pid:454,avocd]
[0-4.3316] [T2D_DBG] [ALSA]dec0_out_gain_put: Dec0 out Gain 0 [pid:454,avocd]
[0-4.3316] [T2D_DBG] [ALSA]dec0_out_gain_put: Dec0 out Gain 0 [pid:454,avocd]
[0-4.3317] [T2D_DBG] [ALSA]dec0_out_gain_put: Dec0 out Gain 30 [pid:454,avocd]
[0-4.3342] [sdp_alsa][pcm_main_pulse_gain_put][call:avocd] volume 100
[0-4.3673] [T2D_DBG] dnse_srs_put dnsv: value 0 [pid:454,avocd]
[0-4.3687] [T2D_DBG] dnse_personal_put: dnse dha band volume 0 [pid:454,avocd]
[0-4.3687] [T2D_DBG] dnse_personal_put, On/Off[0]
[0-4.3688] [T2D_DBG] dtv_installation_mount_type_put: dtv_installation 0 [pid:454,avocd]
[0-4.3712] [T2D_DBG] [ALSA]dec0_out_gain_put: Dec0 out Gain 0 [pid:454,avocd]
[0-4.3713] [sdp_alsa][spdif_raw_out_gain_put][call:avocd] volume 0
[1-4.4490] high speed device detected
[1-4.4524] BRCM Wi-Fi Driver version : BRCM43569_1.201.58_150617_MARKET_ISSUE
[1-4.4595] ##wl_create_event_handler: PROC_START (event_tsk)
[SBH] get_boot_r[1-4.4672] CFG80211-ERROR) wl_cfg80211_set_p2p_event_active : [3-4.4672] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xd6d6267c

[1-4.4779] p2p_event_active is true
eason is (1)
[SBH] create boot [1-4.4849] dhd_deferred_work_init: work queue initialized 
[1-4.4894] 
[1-4.4894] Dongle Host Driver, version 1.201.68 (r515760)
[1-4.4894] Compiled from 
[0-4.4949] [bptime] process open : org.volt.firsts(248)
mode file(/tmp/normal_mode)
[SBH] bw_get_boot_m[1-4.5076] Register interface [wlan0]  MAC: ee:ee:ee:ee:ee:ee
[1-4.5076] 
[1-4.5195] dbus_usb_dlneeded: chip 0xaa31 rev 0x2
[1-4.5450] NVRAM 6334 bytes downloaded
[0-4.6075] usb 3-1.1.2: new full-speed USB device number 4 using sdp-ehci
[0-4.7116] usb 3-1.1.2: New USB device found, idVendor=046d, idProduct=c713
[0-4.7173] usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[0-4.7373] usb 3-1.1.2: SerialNumber: 000761E33899
[0-4.7475] creating file '004'

[/home/abuild/rpmbuild/BUILD/org.volt.engine-1.11.2/src/util/logger.cc:54] Weird name: FS_OBJECTDUMP


-------------------------main() start-------------------------

[0-4.8193] usb 3-1.1.3: new full-speed USB device number 5 using sdp-ehci
[1-4.8399] [HAWK-UFT] SetCursorInfo: [0]
[1-4.8428] [HAWK-UFT] m_hawkuft_set_film: [value:OFF][cursor:0]
[2-4.8632] [EdidUtil][UpdateWrite]Control type [100] SVC PORT [0], EDID VERION[0], NUM OF HDMI[4], MAX HDMI PORT[4]
[2-4.8721] [EdidUtil][UpdateWrite][1][0][0]
[2-4.8935] eControlType[100] / Spend Time : [32]ms
[3-4.8972] [EdidUtil][UpdateWrite]Control type [3] SVC PORT [0], EDID VERION[0], NUM OF HDMI[4], MAX HDMI PORT[4]
setJustReady: 1
setAutoStart: 1
bundle[--root] = /usr/apps/org.volt.firstscreen/bin/
bundle[--app-js] = /usr/apps/org.volt.firstscreen/bin/first_screen/app.js
bundle[--data-path[0-4.9325] usb 3-1.1.3: New USB device found, idVendor=046d, idProduct=c714
[2-4.9330] @tztv_hdmi_switch/s_ext_ctrls/72/ms
[3-4.9417] [HAWK-UFT] SetMute: H:[548] V:[2250]
[3-4.9417] [HAWK-UFT] SetMute: [OFF][496-fb_do_inmute_pr]
[3-4.9417] [ft_set_inverter][on][flag:0][pid:496,fb_do_inmute_pr]
[3-4.9438] [ft_dpms_on][pid:526,system_server]
] = /opt/down/pa[0-4.9643] usb 3-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[0-4.9708] usb 3-1.1.3: SerialNumber: 000761E33899
nels/firstscreen_temp/
bundle[--firstscreen] = true
bundle[--default-font] = SamsungSmart_Ligh[1-4.9843] creating file '005't
bundle[--v8.gc.threshold] = 61440
bundle[--v8.gc.threshold-poll-interval] = 3
args_[0] = /usr/apps/org.volt.firstscreen/bin/org.volt.firstscreen
args_[1] = --root
args_[2] = /usr/apps/org.volt.firstscreen/bin/
args_[3] = --app-js
args_[4] = /usr/apps/org.volt.firstscreen/bin/first_screen/app.js
args_[5] = --data-path
args_[6] = /opt/down/panels/firstscreen_temp/
args_[7] = --firstscreen
args_[8] = true
args_[9] = -[1-5.0241] lowmemnotify_poll (6%, Used 98MB, Free 1427MB, normal  )
-default-font
args_[10] = SamsungSmart_Light
args_[11] = --v8.gc.threshold
args_[12] = 61440
args_[13] = --v8.gc.threshold-poll-interval
args_[14] = 3
[0-5.0525] dbus_usb_resetcfg: download done 230 ms postboot chip 0xa123/rev 0x1
[0-5.0713] DBUS: vid=0xa5c pid=0xbd27 devid=0x4322 bustype=0x0 mtu=512
[0-5.0786] dhd_open: dhd_open_status 1
[0-5.0809] dhd_dbus_state_change: DBUS current state=2

[0-5.0901] CFG80211-ERROR) dhd_tdls_set_mode : enable tdls_auto_op failed. -1
[0-5.0963] dhd_preinit_ioctls: reuse mac addr f8-04-2e-77-e4-f0
[0-5.1042] Firmware up: op_mode=0x0005, MAC=f8:04:2e:77:e4:f0
[0-5.1251] Firmware version = wl0: Apr 23 2015 16:23:10 version 7.35.143.34 (r522930) FWID 01-1b0a2d6
[0-5.1341] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
[0-5.1397] dhd_wlfc_init: query wlfc_mode succeed, fw_caps=0x1c
[0-5.1479] dhd_wlfc_init(): wlfc_mode=0x18, ret=0
[0-5.1511] Country Code = US/160, len = 6 
[0-5.1935] Get Country Code = US 0 
[2-5.2030] WLC_E_IF: NO_IF set, event Ignored


AVOC START
[3-5.2106] CFG80211-ERROR) wl_cfgp2p_register_ndev : set IF_ADDING
[2-5.2157] CFG80211-ERROR) wl_cfg80211_notify_ifadd : [3-5.2159] CFG80211-ERROR) wl_cfgp2p_register_ndev : wait event

[2-5.2255] clear IF_ADDING 
[2-5.2282] CFG80211-ERROR) wl_cfg80211_notify_ifadd : wake up netif_change_event 
[3-5.2354] CFG80211-ERROR) wl_is_p2p_event : P2P event(54) on interface(ifidx:1)
[3-5.2425] CFG80211-ERROR) wl_is_p2p_event : Event is Not p2p event return False 
[3-5.2498] CFG80211-ERROR) wl_cfgp2p_register_ndev : timeout : 3968ms, status 64 0, valid 1
[2-5.2546] [bptime] process open : TIFSDaemon(525)
[3-5.2657] dhd_register_if: netdevice mac addr f8-04-2e-77-e4-f0
[3-5.2706] Register interface [p2p0]  MAC: f8:04:2e:77:e4:f0
[3-5.2706] 
[0-5.3180] dhd_open: opened by driver
[0-5.3201] Wi-Fi wlan interface is up
[0-5.3239] usbcore: registered new interface driver dbus_usbdev
[0-5.3333] dhd_module_init out
[0-5.3398] bcmdhd mod ld(0xbef67000)
[vendor-config] /sbin/insmod /lib/modules/wifi/bcmdhd.ko firmware_path=/lib/modules/wifi/43569a0.bin.trx nvram_path=/lib/modules/wifi/nvram.txt init_ccode=US/160
[vendor-config] BRCM Combo Wi-Fi Driver Loaded
[vendor-config] Network Support Wired
[vendor-config] Successfully loaded Wi-Fi Drivers
[3-5.4491] [HdmiSw][SII9777][JackBoston:8068] EventFlags : 0x80
[0-5.4562] FE_DBG_CMD_GET_TUNER_VERSION
[1-5.4596] This API_GetTunerVersion fucntion is called, but functin does not have body
[1-5.4686] [TUNER_MAIN] TunerVersion []
[0-5.5353] libphy: 00120000.mdio:00 - Link is Up - 100/Full
[3-5.5468] [bptime] process open : tvs-main-loop(530)
[1-5.5670] input: Advanced Touch REMOTE as /devices/virtual/input/input2
[1-5.5724] input: Advanced Touch REMOTE as /devices/virtual/input/input3
-------------------- justReady
-------------------- skipped
[0-5.6442] [bptime] process open : tv-viewer(614)
[3-5.6533] [HdmiSw]Sii9777HandlerT[573][JackBoston] SII9777_EVENT_FLAGS__AV_LINK_CHNG : [HDMI1]
[FB:INIT] excuted /usr/sbin/vendor-config!!
[1-5.7372] BTSBC btsbc_module_init: module inserted
[1-5.7404] btsbc mod ld(0xbefc6000)
[3-5.7578] [EdidUtil][UpdateWrite]
EDID Verify --------------> [ OK ]
[2-5.7599] BTPCM btpcm_module_init: module inserted
[2-5.7599] BTPCM btpcm_hrtimer_init: HR Timer resolution=1
[2-5.7599] btpcm mod ld(0xbefcf000)
[2-5.7848] BTUSB btusb_state_proc_init: /proc/driver/btusb-state entry created
[3-5.7865]  [HDMIRX:rev5] Connection type from switch: 0 =--- :: [Odd_Port 5] [Even_Port 5] [is_ext_port_changed 0] [is_quad_clk 0] [is_scrm 0] 
[3-5.7865] [HDMIRX Driver]Disconnecting from default port 
[1-5.7872]   [HDMIRX] Oneshot power down done for port0  
[1-5.7872]  [HDMIRX][link1] : staHdmiRx_ProcessingTask_Chip0 [port0] is disconnected from [link1] !!!
[3-5.7952] HDMIRX stopped after bootup as default source is NOT HDMI 
[0-5.8394] Bluetooth: [BTUSB]: Start Probe
[0-5.8426] btusb_create:initiating spin_locks for btusb-endpoint buffers
[0-5.8498] btusb_create:all endpoint-buffers lock init done
[0-5.8589] Bluetooth: [BTUSB]: Finished Probe
[0-5.8617] BTPCM btpcm_ibiza_init: The Linux time reference (HZ) is 250
[0-5.8683] BTPCM btpcm_ibiza_init: /proc/driver/btpcm-ibiza entry created
[0-5.8748] BTPCM btpcm_ibiza_init: ibiza_pcm_buf_left_phy_addr=0x0
[0-5.8807] BTPCM btpcm_ibiza_init: ibiza_pcm_buf_size=86016
[0-5.8870] BTPCM btpcm_ibiza_init: ibiza_pcm_left_write_phy_addr=0x0
[0-5.8920] BTPCM btpcm_ibiza_init: ibiza_enable_mark_addr(Default)=0x0
[0-5.9029] usbcore: registered new interface driver btusb
[0-5.9078] btusb mod ld(0xbefd9000)
[1-5.9245] BTUSB btusb_state_file_open: Opening the /proc/driver/btusb-state
[1-5.9299] BTUSB btusb_state_file_read: read called: 1981 0x0
[1-5.9472] BTUSB btusb_state_file_open: Opening the /proc/driver/btusb-state
[1-5.9526] BTUSB btusb_state_file_read: read called: 1987 0x0
[1-5.9645] hid_samsung mod ld(0xbe41a000)
[FB:INIT] load_drivers_insmod thread end(7)
[FB:INIT] fl_callback_driver
[FB:INIT] fi_util_mq_send_cmd: cmd(107)
[FB:INIT] destroy mutex
[FB:INIT] fi_util_destroy_mutex: error while destory mutex[0](16)
[FB:INIT] fast init end
[2-6.0488] [RTC]Get Current Time[0115:06:27 09:28:46]
[xorg-launch-helper] system time (6.0753) xorg reply (4) xorgmoni[1-6.0835] ##### send signal SIG : 9, dbus-daemon(461)->dbus-daemon(728) __send_signal
toring (0)
[3-6.1010] [RTC]Set Current Time[0115(15):06:27 09:28:46]
[2-6.1252] [RTC]Get Current Time[0115:06:27 09:28:46]
[3-6.2372] [HdmiSw][SII9777][JackBoston:8068] EventFlags : 0x800
[2-6.2705] [T2D_DBG] bt_kernel_out_buf_info: This function is for bt/acm pcm/es info
[0-6.3208] [T2D_DBG] bt_kernel_out_buf_info: This function is for bt/acm pcm/es info
[0-6.3279] [T2D_DBG] uBufferSize[0x15000],uBaseAddress[0xb38a0000],uAccessPointtAddress[0xb340081c],uFrameSizeAddress[0xb340089c],uEnableMardAddress[0xb34008a0] 
[1-6.4321] [bptime] process open : process_pool_la(750)
[3-6.4372] [HdmiSw][SII9777][JackBoston:8068] EventFlags : 0x80
[3-6.4572] [HdmiSw]Sii9777HandlerT[573][JackBoston] SII9777_EVENT_FLAGS__AV_LINK_CHNG : [NONE]
[2-6.5026] 3G Dongle Port set to 1
[3-6.5498] [HdmiSw]usb-server[768][m_WriteBostonGPIO] 0x6 : 0x1
[3-6.5540] [HdmiSw]usb-server[768]Boston GPIO 6 set High Success
[0-6.6204] input: function-osd as /devices/virtual/input/input4
[3-6.6836] [sdp_alsa][set_main_bt_mute_audio_stream_put][call:amixer] MAIN BT/ACM Output UNMUTE !!!!!!
[1-6.8660]  ** do_settimeofday called by :[net-config] pid:[523] (UTC)timeval:[Current:6 Pass:1437989304]** 
[2-6.9391] 
You do not have the required permissions to view the files attached to this post.

User avatar
juusso
SamyGO Moderator
Posts: 9759
Joined: Sun Mar 07, 2010 6:20 pm

Re: JU7100 bootup console output

Post by juusso » Thu Jul 30, 2015 8:55 am

Can i ask what exact cable have you used, connection details etc. Thanks. (need to add to wiki, could you?)
LE40B653T5W,UE40D6750
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

summiter
Posts: 6
Joined: Mon Jul 27, 2015 8:02 pm

Re: JU7100 bootup console output

Post by summiter » Thu Jul 30, 2015 9:17 am

Sure no problem - I'll add it to the wiki tomorrow along with the various remote commands to get into service menus and whatnot.

It's 115,200/n/1 on the ex-link jack using 3.5 inch mini plug to serial db9.

User avatar
beatfreak
SamyGO Project Donor
Posts: 548
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: JU7100 bootup console output

Post by beatfreak » Wed Aug 19, 2015 8:34 pm

summiter wrote:It's 115,200/n/1 on the ex-link jack using 3.5 inch mini plug to serial db9.
so it's RS232 level, not TTL?
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

summiter
Posts: 6
Joined: Mon Jul 27, 2015 8:02 pm

Re: JU7100 bootup console output

Post by summiter » Wed Aug 19, 2015 11:30 pm

That's correct. The cable is set up just like previous ex-link cables. If you need a diagram let me know and I'll shoot ya a copy.

sectroyer
Official SamyGO Developer
Posts: 5648
Joined: Wed May 04, 2011 5:10 pm

Re: JU7100 bootup console output

Post by sectroyer » Wed Oct 07, 2015 6:16 am

summiter wrote:That's correct. The cable is set up just like previous ex-link cables. If you need a diagram let me know and I'll shoot ya a copy.
If I get it correctly cable is "same" but NOT same.... :roll: I use DKU-5 with ExLink but I assume you can't use it with J... You use some other nokia cable?
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on http://ctrlv.it/ Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!

User avatar
beatfreak
SamyGO Project Donor
Posts: 548
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: JU7100 bootup console output

Post by beatfreak » Fri Feb 12, 2016 8:17 am

sectroyer wrote:
summiter wrote:That's correct. The cable is set up just like previous ex-link cables. If you need a diagram let me know and I'll shoot ya a copy.
If I get it correctly cable is "same" but NOT same.... :roll: I use DKU-5 with ExLink but I assume you can't use it with J... You use some other nokia cable?
From what i understand its the same as for a/b-series just plain wiring, no signal modification.
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

Post Reply

Return to “[J] Brainstorm”