I do not remember if command works in same way on T-DT5 like it worked on T-VALDEUC. But at least - worth to try. investigate if toggle command exists at all. I do not know you linux skills, i hope you can execute simple linux commands in console window.
I apologize for being so anxious but seeing my TV everyday all ruined after a stupid firmware update really breaks my heart.
I'm going to explain to you exactly where I'am at.
I followed this tutorial:
https://wiki.samygo.tv/index.php?title= ... es_models)
And I'm stuck at step number 18.
18. TV restarts few times and starts in black screen. DO NOT POWER OFF, DO NOT DISCONNECT USB!
Wait 3 minutes. After three minutes you can switch off TV.
Switch on TV again (THIS IS THE LAST THING I DID)
Try connect to TV over Telnet (Port 23).
If you get to console, congratulations.
TV starts in Hotel mode. If you have your channel settings, you can deactivate hotel mode from service menu.
Now... how am I supposed to connect to TV over Telnet if all my TV has is a VGA port???
What kind of cable do I need?
On this other page:
https://wiki.samygo.tv/index.php?title= ... BD_players
You can read this...
"So if you wanna have a fully supported and very well made USB-to-serial (RS232 @ 3.3V) cable, I'd recommend the much more expensive FTDI cables".
You could please indicate for me the kind of FTDI cable that I need for my TV model?? So I can go and buy one straight away...
Thank you very much for your help.
- SamyGO Project Donor
- Posts: 581
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
Please dont confuse telnet with hardware serial console. Telnet is software thats running over network (IP port 23)
Yes your pm is what brought me here, but please dont do this kind of thing, messaging multiple members with your question. A link to the corresponding forum thread and the question if one can help there looks a bit nicer.
FYI: you can close your ssh session with SamyGO with
Code: Select all
And considering also that between the 1004 original firmware (built-in) and the 1024.1 (lastest and only update) there never was any other update...
What's the best option for me? Should I go for one of those explained in this page:
https://wiki.samygo.tv/index.php?title= ... r_firmware
And which one?
Or you mean using shell as in for the T-VALDEUC firmware? In which case...
if [ -f /mtd_rwarea/Version.0 ] ; then
echo SWU_T-VALDEUC_001000_I04_ES000DS000KS000RS000_100205 > /mtd_rwarea/Version.0
echo SWU_T-VALDEUC_001000_I04_ES000DS000KS000RS000_100205 > /mtd_rwarea/Version.1
These commands... what should they look like for trident firmware?
Hotel Mode OFF
RS232 on DEBUG
I get this on an endless scrolling.
As you can see, it seems like Putty is accessing the console and detecting the firmware but it's finding some barrier.
Is it because console needs to be unlocked? I tried using TDM codes for C series (10041004 and 20089999) writing directly on the command-line but nothing happened.
Could it be of any help for me?
How does it work?