General forum talking area for K series TVs.
- Posts: 2
- Joined: Thu Dec 20, 2018 6:55 pm
horatyu wrote: ↑
Sun Dec 23, 2018 6:34 am
If Your Tv is off You cam push Info, menu(settings), mute,power.
I tried it, but it can't work. I tested the remote controller when the TV working and the buttons are working correctly.
When the TV is off and I pushed the buttons the controll led on the TV is flashing, so it recived the signal, but the TV not starting in Service menu
- SamyGO Moderator
- Posts: 10125
- Joined: Sun Mar 07, 2010 6:20 pm
- Posts: 4
- Joined: Fri Oct 12, 2018 8:13 am
you have to wait a minute or so after power off, otherwise sometimes it won't go into Ser-menu
also make sure it's in TV mode before turning off, it won't go into SM from hdmi
- Posts: 2
- Joined: Mon Mar 18, 2019 4:22 pm
Can anybody share his ADC settings of KU7000?
- Posts: 1
- Joined: Sun May 05, 2019 7:34 am
Hello! Can anyone help me? I own a 55KU6172 model and I have messed up the hdmi ports in the service menu. I need the correct configuration for the HDMI path witch is found in engineering option. I need the correct four digit number and letters( 1234 and abcd).