how to record over lan

[c74k]

i need information how to record over LAN

Windows XP Home 32 Bit
Ip: 192.168.1.5 /192.168.1.2 / 192.168.1.3 /192.168.1.9 /192.168.1.13
Netmask: 255.255.255.248
shared: C:\SamsungTvRecords (Full Acess)
Workgroup: DOM

Windows 7 Profesional 64 bit
Ip: 192.168.1.3
shared: C:\Users (Read Only Acess - standard)
Netmask: 255.255.255.248
Workgroup: DOM

Brother Laser Printer
Ip: 192.168.1.11
Netmask: 255.255.255.248
Workgroup: --

TV le32b650 soft 2005:
Ip: 192.168.1.4
Netmask: 255.255.255.248

how to record over LAN
How To configure SamyGo??

[erdem_ua]

Just search for play movie from lan via SamyGO Extensions package.
That make your SAMBA service recognized as USB that attached to your TV.
After you can record to that USB device.
Got it?

[c74k]

playback no problem
recording is problem




http://forum.samygo.tv/viewtopic.php?f= ... 9608#p9608



s? tu jacy? polacy ??

[erdem_ua]

Do you edit recording path on PVR app?
Also you needed to check if that path is write-able by TV.

Enter the TV shell via Telnet and try to copy some files to your Samba share.

[c74k]

; Recording directory search order.
; $(USB) in the beginning means the first available /dtv/usb/sd* directory
TARGET=$(USB):$(USB)/pvr:/mtd_rwarea/nfs_mount/pvr

what i must change ??






co musze zmieni? aby to dzia?a?o ??

[erdem_ua]

It's up to your TV configuration. I don't know what it is on your TV setup.
Where do you mount your Samba? If you use Expansion pack to mount samba than
TARGET=/mtd_rwarea/samba_mount
might help.

[c74k]

i upgrade normal firmware - orygnal
download and copy samygo and samygoPVR and SamyGo Telnet enabler

now i connect to TV end rename bluetoth.init to other name now i try edit samba.init

[c74k]

i download samy go 035 edit in init files server="192.168.1.2"
and only start bluetoth folder and upnp

[c74k]

i download "SamyGO All Extensions v0.03.6.r08 for T-CHU7DEUC 20101120212045" + "Samygo PVR" + Samy GO Telnet enabler"


1. copy all to TV
2. Run SamyGo Telnet Enabler
3. go to mtd_tlib\GGame\SamyGo\Samba and edit file smb.cfg remove # in line workgroup and netbios

Workgroup = DOM

4. go to mtd_tlib\GGame\SamyGo\init.d\ and copy samba.init.dis to samba.init and edit login and password and serwer ip and save
5. run samyGo
go to /dtv/usb/sda1/smb/192.168.1.2/SamsungTVRecords and test - its works (create directory and delete)
i go to SamyGo PVR Folder and edit Target=/dtv/usb/sda1/smb/192.168.1.2/SamsungTVRecords PVR.ini