[ROOT] "Skype replacement" root H

[josch76]

SpoilerShow

This method is for OLD FIRMWARES (T-MST14 <= 2130, T-GFPx < 1290, T-NT14U < 1050, all T-GFS).
USB used only to install (unpack archive to a USB flash drive), method WORKS WITHOUT USB.
The method is INDEPENDENT OF SKYPE.

For H SERIES!!!! do this:

1. If you use other rooting method, it is necessary to remove root.
   For [ROOT] H "Skype refueled" root and for [Ended][ROOT] H "Skype" root execute telnet command:

   Code: Select all

   rm -rf /mtd_rwcommon/moip/engines/Skype
   rm -rf /mtd_rwcommon/emps/empSkype
   rm -rf /mtd_rwcommon/emps/empSkype_img
   rm -rf /mtd_rwcommon/widgets/normal/111399001835_img
   rm -rf /mtd_rwcommon/widgets/normal/111399001835

   For [ROOT] H "Network" root execute telnet command:

   Code: Select all

   rm /mtd_rwarea/network/runSamyGO.sh

   Power OFF TV, unplug USB, power ON TV

Hi,

One question: where do I have to execute above mentioned commands? I thought I have to root the TV before I can connect via Telnet?

[mihd]

SpoilerShow

This method is for OLD FIRMWARES (T-MST14 <= 2130, T-GFPx < 1290, T-NT14U < 1050, all T-GFS).
USB used only to install (unpack archive to a USB flash drive), method WORKS WITHOUT USB.
The method is INDEPENDENT OF SKYPE.

For H SERIES!!!! do this:

1. If you use other rooting method, it is necessary to remove root.
   For [ROOT] H "Skype refueled" root and for [Ended][ROOT] H "Skype" root execute telnet command:

   Code: Select all

   rm -rf /mtd_rwcommon/moip/engines/Skype
   rm -rf /mtd_rwcommon/emps/empSkype
   rm -rf /mtd_rwcommon/emps/empSkype_img
   rm -rf /mtd_rwcommon/widgets/normal/111399001835_img
   rm -rf /mtd_rwcommon/widgets/normal/111399001835

   For [ROOT] H "Network" root execute telnet command:

   Code: Select all

   rm /mtd_rwarea/network/runSamyGO.sh

   Power OFF TV, unplug USB, power ON TV

Hi,

One question: where do I have to execute above mentioned commands? I thought I have to root the TV before I can connect via Telnet?

....

1. If you use other rooting method...
   ....

[sauron2003]

I have T-GFP8DEUC v 2150.9. Installator goes through without any error (everywhere YES, OK), but no telnet or ftp access.

Please help me what am I doing wrong?

[mihd]

I have T-GFP8DEUC v 2150.9. Installator goes through without any error (everywhere YES, OK), but no telnet or ftp access.

Please help me what am I doing wrong?

You must downgrade firmware

[sauron2003]

I already downgraded to 0000, but it is not possible to find firmware version lower than 1290. Do you know where can I download such old fw?

[notengo13]

I already downgraded to 0000, but it is not possible to find firmware version lower than 1290. Do you know where can I download such old fw?

viewtopic.php?f=70&t=9497

[sauron2003]

I know this page by heart. Version for my T-GFP8DEUC starts with 2130.6

[sectroyer]

I know this page by heart. Version for my T-GFP8DEUC starts with 2130.6

There is Root Enabler in Extras. Try that

[sauron2003]

I have tried this without Network root, it doesnt work
Network root is only for T-GFPxDEUC<1290 which I don't have unfortunately...
Any ideas?

[sectroyer]

I have tried this without Network root, it doesnt work
Network root is only for T-GFPxDEUC<1290 which I don't have unfortunately...
Any ideas?

H Root enabler (like name SAYS) ENABLES "network root" on UNSUPPORTED FW versions. That's whole point