TV=Network HUB for WIRELESS-ETH0?
-
- Posts: 36
- Joined: Wed May 05, 2010 9:31 pm
- Location: Bucharest, Romania
- Contact:
TV=Network HUB for WIRELESS-ETH0?
Hi,
This may be an absurd question, but...I want to use the network connection of the TV, that is wirelessly connected to my router, so that my IPTV box, connected to the unused wired LAN port of TV, will be able to also get a connection to the router.
This is because I want to get rid of the cable that's now connecting the IPTV box to my router.
I'm a Linux beginer, but I guess there is a way to connect the wired LAN interface eth0 to the wireless interface ra11n0. I have access to the TV shell. I activated the eth0 interface using "ifconfig eth0 up" and gave it an IP address.
Thank you.
This may be an absurd question, but...I want to use the network connection of the TV, that is wirelessly connected to my router, so that my IPTV box, connected to the unused wired LAN port of TV, will be able to also get a connection to the router.
This is because I want to get rid of the cable that's now connecting the IPTV box to my router.
I'm a Linux beginer, but I guess there is a way to connect the wired LAN interface eth0 to the wireless interface ra11n0. I have access to the TV shell. I activated the eth0 interface using "ifconfig eth0 up" and gave it an IP address.
Thank you.
Samsung LE37B653T5PXZG, T-CHLCIPDEUC 2008.2 firmware, Advanced Mode Patch
Re: TV=Network HUB for WIRELESS-ETH0?
Actually I think we need to set up network client-bridge.
What is needed:
p.s. Finally i figured out - the missing *.mod file for module i get with this command:
I do not know why i got this error earlier...
I still get same error after distclean for any module i want to compile and fix it with command above.
Now my cross-compiler runs (well? not sure yet - i still get a lot of warnings while kernel compilation and it ends with error...)
p.p.s. I installed CodeSourcery compiler for arm. I`ll write short how-to later.
Linux version grab here.
What is needed:
- busybox brctl applet
It can be downloaded from here. - bridge module support for kernel (recompiled kernel or separate module)
I stuck on error:After some researches i found possible solution:Code: Select all
LD [M] net/bridge/bridge.o /bin/sh: .tmp_versions/bridge.mod: No such file or directory make[1]: *** [net/bridge/bridge.o] Error 1 make: *** [net/bridge/bridge.ko] Error 2
But it did not help:The solution:
make -C /usr/src/redhat/BUILD/kernel-2.6.21/linux-2.6.21.i686/ SUBDIRS=net/bridge/ modulesAnother possible solution did not help as well.Code: Select all
root@localhost:/usr/src/linux/linux-r011# make -C /usr/src/linux/linux-r011/ SUBDIRS=net/bridge/ modules make: Entering directory `/usr/src/linux/linux-r011' WARNING: Symbol version dump /usr/src/linux/linux-r011/Module.symvers is missing; modules will have no dependencies and modversions. Building modules, stage 2. MODPOST /bin/sh: scripts/mod/modpost: No such file or directory make[1]: *** [__modpost] Error 127 make: *** [modules] Error 2 make: Leaving directory `/usr/src/linux/linux-r011'
- Some configuration to convert TV to wireless client (or repeater?)
http://www.adamsinfo.com/brctl-creating ... rk-bridge/
http://www.faqs.org/docs/Linux-HOWTO/BR ... -THE-UTILS
https://help.ubuntu.com/community/Bridg ... Interfaces
p.s. Finally i figured out - the missing *.mod file for module i get with this command:
Code: Select all
make -C /usr/src/linux/linux-r011/ SUBDIRS=net/bridge/ module
make -C /usr/src/linux/linux-r011/ SUBDIRS=fs/cifs/ modules
I still get same error after distclean for any module i want to compile and fix it with command above.
Now my cross-compiler runs (well? not sure yet - i still get a lot of warnings while kernel compilation and it ends with error...)
p.p.s. I installed CodeSourcery compiler for arm. I`ll write short how-to later.
Linux version grab here.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: TV=Network HUB for WIRELESS-ETH0?
Don't know what went wrong juuso,
I just did
make menuconfig, switch on Ethernet bridging,
make -j3
and hey presto,
bridge.ko built within seconds. (not that I am going to use it)
kernel 2.6.18_SELP_ARM-something, cross-build toolchain from Samsung (gcc 4.2.0 etc)
probably your kernel configuration is missing some dependencies, as set in the configuration stage.
Mixing modules from different kernel version in general is not a good idea, unless you like backporting .
grtz,
marcelr
I just did
make menuconfig, switch on Ethernet bridging,
make -j3
and hey presto,
bridge.ko built within seconds. (not that I am going to use it)
kernel 2.6.18_SELP_ARM-something, cross-build toolchain from Samsung (gcc 4.2.0 etc)
probably your kernel configuration is missing some dependencies, as set in the configuration stage.
Mixing modules from different kernel version in general is not a good idea, unless you like backporting .
grtz,
marcelr
Re: TV=Network HUB for WIRELESS-ETH0?
thanks! i will try find out whats wrong, but... could i have compiled binary?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: TV=Network HUB for WIRELESS-ETH0?
It seems, it won`t load:
Code: Select all
insmod /var/bridge.ko
insmod: cannot insert `/var/bridge.ko': Unknown symbol in module (-1): No such file or directory
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: TV=Network HUB for WIRELESS-ETH0?
Hmm,
Looks like there's some extra built-in stuff to it:
So possibly you will need a kernel replacement for this to work ...
grtz,
marcelr
Looks like there's some extra built-in stuff to it:
Code: Select all
[marcelr@laptop46 linux-r011]$ make -j3
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf -s arch/arm/Kconfig
CHK include/linux/version.h
SYMLINK include/asm-arm/arch -> include/asm-arm/arch-ssdtv
CHK include/linux/utsrelease.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
HOSTCC scripts/genksyms/lex.o
HOSTCC scripts/mod/file2alias.o
scripts/genksyms/lex.c:1228:12: warning: 'input' defined but not used
HOSTCC scripts/mod/sumversion.o
HOSTLD scripts/genksyms/genksyms
HOSTLD scripts/mod/modpost
HOSTCC usr/gen_init_cpio
CHK include/linux/compile.h
GEN usr/initramfs_data.cpio.gz
AS usr/initramfs_data.o
LD usr/built-in.o
GZIP kernel/config_data.gz
IKCFG kernel/config_data.h
CC kernel/configs.o
LD kernel/built-in.o
CC [M] net/802/p8022.o
LD net/bridge/built-in.o
CC [M] net/bridge/br.o
CC [M] net/802/psnap.o
CC [M] net/bridge/br_device.o
CC [M] net/bridge/br_fdb.o
CC [M] net/bridge/br_forward.o
CC [M] net/bridge/br_if.o
CC net/core/dev.o <----- about here ...
CC [M] net/bridge/br_input.o
CC [M] net/bridge/br_ioctl.o
CC [M] net/bridge/br_notify.o
CC [M] net/bridge/br_stp.o
CC [M] net/bridge/br_stp_bpdu.o
CC [M] net/bridge/br_stp_if.o
CC [M] net/bridge/br_stp_timer.o
CC [M] net/bridge/br_netlink.o
LD net/core/built-in.o <----- and here ...
CC [M] net/bridge/br_sysfs_if.o
CC [M] net/bridge/br_sysfs_br.o
LD net/llc/built-in.o
CC [M] net/llc/llc_core.o
LD [M] net/bridge/bridge.o
CC [M] net/llc/llc_input.o
CC [M] net/llc/llc_output.o
LD [M] net/llc/llc.o
LD net/built-in.o
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
<snip>
grtz,
marcelr
-
- Posts: 36
- Joined: Wed May 05, 2010 9:31 pm
- Location: Bucharest, Romania
- Contact:
Re: TV=Network HUB for WIRELESS-ETH0?
Hi,
It seems it's harder than I thought.
Thanks for the investigation anyway, guys.
It seems it's harder than I thought.
Thanks for the investigation anyway, guys.
Samsung LE37B653T5PXZG, T-CHLCIPDEUC 2008.2 firmware, Advanced Mode Patch
Re: TV=Network HUB for WIRELESS-ETH0?
I`m trying to compile whole kernel with bridge enabled. I`m not going to use bridged network on TV, but it is interesting to get it working.
Just for fun...
Just for fun...
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
-
- Posts: 36
- Joined: Wed May 05, 2010 9:31 pm
- Location: Bucharest, Romania
- Contact:
Re: TV=Network HUB for WIRELESS-ETH0?
That would be great, thanks!juuso wrote:I`m trying to compile whole kernel with bridge enabled. I`m not going to use bridged network on TV, but it is interesting to get it working.
Just for fun...
Samsung LE37B653T5PXZG, T-CHLCIPDEUC 2008.2 firmware, Advanced Mode Patch