Ok, with sleep set to 25 secs works ok
I have to test If it start recordings with tv off
PVR NW Share w/o USB or small image mod vusb.init
PVR NW Share w/o USB or small image mod vusb.init
It works too!!!
Thx for helping me on this
If u need some help with something else, u just have to say it
Thx for helping me on this
If u need some help with something else, u just have to say it
Re: PVR NW Share w/o USB or small image mod vusb.init
have you tried lower values than 25 secs? or other things? please check this thread regulary because this script writes a couple of MB every boot on /mtd_down/ and i still wait for some response from devs, anyway i also run this script on my tv all time so i might be the first who expirience problems.
PVR NW Share w/o USB or small image mod vusb.init
Ok, i will read this tread
H
Thx
H
Thx
Re: PVR NW Share w/o USB or small image mod vusb.init
im having a little issue and i dont know if this script is the problem
sometimes, when i turn on the tv, it works for about 1 minute and then it shuts down
other times everything works ok
i have problems to obtain a pattern of the fail
?Where can i look logs or something to try to find whats happening?
sometimes, when i turn on the tv, it works for about 1 minute and then it shuts down
other times everything works ok
i have problems to obtain a pattern of the fail
?Where can i look logs or something to try to find whats happening?
AW: PVR NW Share w/o USB or small image mod vusb.init
Sorry for not responding, had a 3 week business trip. The reason for this might be watchdog. Also seen this from time to time. Can be some timeout problem as well. Will try to figure out reason for this when i have some time. My one is rebooting and then everything is fine, same for yours as i saw in your post. Will put some logging in my script.
Re: PVR NW Share w/o USB or small image mod vusb.init
Hi Rohel, you still have issues? had no reboot anymore, but also my sleep value is a lot smaller than yours. how often it happen? do you use any USB device or WIFI?
Re: PVR NW Share w/o USB or small image mod vusb.init
yes, i still suffer the issue
it happens about 1 on 10 starts
my wait time its 20 seconds, what is your wait time????
about usb or wifi, no, i dont have any usb plugged and the TV is connected over ethernet cable
it happens about 1 on 10 starts
my wait time its 20 seconds, what is your wait time????
about usb or wifi, no, i dont have any usb plugged and the TV is connected over ethernet cable
Re: PVR NW Share w/o USB or small image mod vusb.init
i see this 1 from 50, my wait time is 0 (yes ZERO) still wonder about this, do you use Webif? can you send a list of files in init.d?
Re: PVR NW Share w/o USB or small image mod vusb.init
this is my status on webif
about zero wait time... you dont need time to de NFS plates to speed up???
Code: Select all
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/01_01_catch_crap.init start stop
Status:
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/01_04_server_replacement.init start stop
Status:
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/01_05_hiddev.init start stop
Status:
HID 0a5c:4502
HID 0a5c:4503
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/02_04_vusb.vpvrimage.init start stop
Status:
SamyGO Virt. USB
SamyGO Virt. USB
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/03_01_fuse.init start stop
Status:
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/03_03_djmount.init start stop
Status:
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/03_03_nfsmount.init start stop
Status:
192.168.0.5:/volume1/Peliculas on /dtv/usb/sda/nfs/192.168.0.5/_volume1_Peliculas type nfs (rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,soft,nointr,nolock,proto=tcp,timeo=70,retrans=3,sec=sys,addr=192.168.0.5)
192.168.0.5:/volume1/RECORD on /dtv/usb/sda/nfs/192.168.0.5/_volume1_RECORD type nfs (rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,soft,nointr,nolock,proto=tcp,timeo=70,retrans=3,sec=sys,addr=192.168.0.5)
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/03_03_sshd.init start stop
Status:
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/04_04_samba.init start stop
Status:
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/06_05_apache.init start stop
Status:
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 900/httpd
tcp 0 0 192.168.0.17:80 192.168.0.11:51649 ESTABLISHED 901/httpd
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/06_05_samba-server.init start stop
Status:
897 890
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/80_80_record_to_nwshare.init start stop
Status:
pls request it on forum
/mtd_rwcommon/widgets/user/SamyGO/SamyGO/etc/init.d/99_99_z_sendinfo.init start stop
Status: