Samba server
Re: Samba server
I have changed in /SamyGO/etc/samba/smb.conf
# workgroup = SAMYGO
to
workgroup = WORKGROUP
same result
init script is original one. no other changes
# workgroup = SAMYGO
to
workgroup = WORKGROUP
same result
init script is original one. no other changes
-
- Official SamyGO Developer
- Posts: 1700
- Joined: Fri Oct 02, 2009 8:52 am
- Location: Austria/Vienna (no Kangaroos here)
- Contact:
Re: Samba server
hm, not really ideas whats wrong, will try to check monday with win7 on b-series tv...
-
- Official SamyGO Developer
- Posts: 1700
- Joined: Fri Oct 02, 2009 8:52 am
- Location: Austria/Vienna (no Kangaroos here)
- Contact:
Re: Samba server
hi,
tested connection from windows7 (64bit sp1 home premium) works like a sharm.
only thing is that i have in
/mtd_rwarea/smb.conf
one line:
hth
tested connection from windows7 (64bit sp1 home premium) works like a sharm.
only thing is that i have in
/mtd_rwarea/smb.conf
one line:
Code: Select all
security = share
Re: Samba server
Brake through.
1, My Samba extraction work fine
2, There have to be option secutity=share in config file of Samba.
3, To open server for example: \\192.168.1.6\Samsung TV
I dont know why \\192.168.1.6\ is not working from Windows, only from Android
Solved!
Thx for help
1, My Samba extraction work fine
2, There have to be option secutity=share in config file of Samba.
3, To open server for example: \\192.168.1.6\Samsung TV
I dont know why \\192.168.1.6\ is not working from Windows, only from Android
Solved!
Thx for help
Re: Samba server
For documentation only:
My model is
LE40B650T2W
Firmware
T-CHL7DEUC - 2005.0
with Autoloader for extra exeDSP plugins and EXT3 support
Transfer rate on EXT3 USB disk connected to TV:
Over Samba:
Read: 5 000 Kb/s
Write: 1 660 Kb/s
Over Bftpd (with XFER_BUFSIZE="64000")
Read: 5 000 Kb/s
Write: 500 Kb/s
My model is
LE40B650T2W
Firmware
T-CHL7DEUC - 2005.0
with Autoloader for extra exeDSP plugins and EXT3 support
Transfer rate on EXT3 USB disk connected to TV:
Over Samba:
Read: 5 000 Kb/s
Write: 1 660 Kb/s
Over Bftpd (with XFER_BUFSIZE="64000")
Read: 5 000 Kb/s
Write: 500 Kb/s
Re: Samba server
As promised, I have attached my samba server solution another time:
To install:
1.) Extract the archive to an USB stick or any writable location on the TV memory
2.) Edit the file smb.conf to set the IP-address of your TV, an hostname and a workgroup name. Edit the shared directories as required.
3.) Start the server using the start_samba.sh script
This distribution includes the nmbd daemon, so the TV should be listed in the network neighborhood of your computer.
https://www.yousendit.com/download/M3Bs ... MHhMWE1UQw
alternative Download Link:
samysamba.tgz:
Can any admin please put this file somewhere here? The forum software does not permit me to attach this file and the hosting servers will drop it after a limited time and a limited number of downloads. Thanks.
To install:
1.) Extract the archive to an USB stick or any writable location on the TV memory
2.) Edit the file smb.conf to set the IP-address of your TV, an hostname and a workgroup name. Edit the shared directories as required.
3.) Start the server using the start_samba.sh script
This distribution includes the nmbd daemon, so the TV should be listed in the network neighborhood of your computer.
https://www.yousendit.com/download/M3Bs ... MHhMWE1UQw
alternative Download Link:
samysamba.tgz:
Can any admin please put this file somewhere here? The forum software does not permit me to attach this file and the hosting servers will drop it after a limited time and a limited number of downloads. Thanks.
Re: Samba server
Thank you, goaskin, I highly appreciated thatgoaskin wrote:As promised, I have attached my samba server solution another time[...]
EDIT:
I have had some time today and I have tried your samba server...
Well, It's not working for me. I run start_samba.sh from a telnet session and the following error shows up:
Code: Select all
/dtv/usb/sda1/SAMYSAMBA/samba/sbin/smbd: error while loading shared libraries: libcrypt.so.1: cannot open shared object file: No such file or directory
/dtv/usb/sda1/SAMYSAMBA/samba/sbin/nmbd: error while loading shared libraries: libcrypt.so.1: cannot open shared object file: No such file or directory
Thanks in advance!
T-CHL7DEUC-2005.0-v0.24-GMT2-ArFIX2-ADFIX-fwver-ENGFIX
Re: Samba server
I meet the same problem on my tabletRakDrak wrote: Server is running fine, but:
1, none of Windows PC (Vista, Windows 7) see Samsung TV
2, After Port scan over my Android tablet, I see open ports 139 netbios-ssn and 445 microsoft-ds. When I try open 445 port, Iam asked for login. root with or without password doesnt working.
Re: Samba server
I have some version of Samba Share installed in my B series. And it works without problems for Windows 7, tested from two different machines.
But on third one, where I have Windows 10, TV just doesn't see that share.
Sharing is done the same way on all machines, appropriate user for access exists.
Any hints?
But on third one, where I have Windows 10, TV just doesn't see that share.
Sharing is done the same way on all machines, appropriate user for access exists.
Any hints?
Re: Samba server
Maybe a clue?
https://www.schkerke.com/wps/2015/06/wi ... mba-shares
https://www.schkerke.com/wps/2015/06/wi ... mba-shares
I do NOT receive any PM. Please use forum.