I need downgrade for my UE40EH5300 TV. Me work exlink and debug menu with shell limited for (A-F/0-9) chars. I don't know how downgrade or hack this TV.
I am upgrade before january 2012. Please help me. Thx
View log My ExLink terminal on TTL:
Code: Select all
=================================
onboot (Mar 6 2012 - 15:38:26)
release ver : 1003 - RELEASE
L1 cache : on
etc : lvds data ctl
=================================
Onboot X10p Sync mode
LCD FastLogo Run...
Panel Init ...done NEC I2C Write Error addr = 0x0006 !!!!
boot partition selection : 0
Loading 1st Partition Kernel....
Loading Kernel....
load kernel size : 3224708 byte
UART1 is used to debug mode.
auth success by h/w sha1
Jump Kernel....
[VDLP] preset_lpj manual set to 3588096
[VDLP] preset_lpj manual set to 3588096
================================================================================
SAMSUNG VDLP Kernel
Version : 0064, release
Applied Last Patch Number : 0716, DTV, X10P, release, DEU_BRANCH
================================================================================
starting pid 27, tty '': '/etc/rc.local'
/etc/rc.local start
=====================================================================
ROOTFS VERSION : "X10P 0071" KERNEL MODULE VERSION : "0064.0716, DTV, X10P, release, DEU_BRANCH"
=====##### send signal from USER, SIG : 0, init(1)->???(27) sys_kill
================================================================
starting pid 36, tty '': '/bin/cttyhack -/bin/sh'
/etc/profile start
rfs_glue mod ld
rfs_fat mod ld
1st partition
1st Partition is selected
mount mtd_exe
mount mtd_rwarea
Cgroup Success
[1]+ Done /etc/cgroup_init
mount mtd_drmregion_a
mount mtd_drmregion_b
Partition.txt doesn't exist
mount mtd_appext
mount mtd_rocommon
== Start exeDSP ==
/mtd_exe/rc.local start !!!!!
"X10P 0071" KERNEL MODULE VERSION : "0064.0716, DTV, X10P, release, DEU_BRANCH"
samsung_mali mod ld
samsung_mstar mod ld
Run FastLogo...
mknod: /dev/tty0: File exists
mknod: /dev/tty1: File exists
mknod: /dev/tty2: File exists
mknod: /dev/tty3: File exists
FastLogo mod ld
mallopt(M_MMAP_THRESHOLD) success!
##### System Execution!!! ##### [1904]
Running Parallel FASTBOOT
[DBFactory:t_ReadFactoryDataFile():491] ############## Find [/mtd_exe/Factory_Part1.dat] in mtd_exe ##################
[DBFactory:t_ReadFactoryDataFile():503] filepath [/mtd_exe/Factory_Part2.dat]
[DBFactory:t_ReadFactoryDataFile():511] ############## Find [/mtd_exe/Factory_Part2.dat] in mtd_exe ##################MIU _gMIU_MapBase= 42c99000
MIU _gPM_MapBase= 40d63000
pthread_mutex_init
CHIP_InitISR
---------------------------------------------
SdCommon_GpioInit()
---------------------------------------------
TD PANEL is LCD
DRAM SIZE 512M
SDAL version : [36m SDAL - 03.49.00.00
[m
>>> TDBuilder::Build start
SDAL - 03.49.00.00
MMAP: E_MMAP_512MB_256MB for Mali testification!!
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 2
ooo u8CacheMode = 0
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 0
ooo u8CacheMode = 2
ooo u8CacheMode = 1
ooo u8CacheMode = 1
[Pad_Init]:MMIO Base = 40d63000
[HAL_TSP_CPU_SetBase][2523] load firmware (address, size) = (0x14be0000, 0x00001e04)
firmware 111 0x14be0000 0x00000014 0x0000be00
<<< TDBuilder::Build End
Init PWM3
GOP FB: 0x64800000. size: 0x400000. end address: 0x64c00000
GOP2 FB: 0x1a584000. size: 0x4c00000. end address: 0x1f184000
[HAL_DSCMB_SetBank][83] Set bank 0x42c99000
u32PhyBufAddr = 14b10100, u32PhyBufSize = 000cff00
u32VirBufAddr = 476bf100, u32VirBufSize = 000cff00
NonPmBase = 0x42c99000, NonPmBankSize = 0x48000
PmBase = 0x40d63000, PmBankSize = 0x280000
CODE_ADDR_NCACHE = 0x476af000, CODE_ADDR = 0x14b00000
pm_aes_fw:
Thrd(1080063056) SEND OUT: ac00
Thrd(1080063056) RESPONSE: 74c5
pTest: 00 00 b1 14
DSPBinBaseAddress = 0x0
DSPMadBaseBufferAdr = 0x1f21c000
HAL_AUDIO_SetPowerOn(1)
DDR_ADDR_HI = 1
DSPMadBaseBufferAdr[DSP_DEC] HAL_MAD_SetMemInfo = 0x1F45C000
======> Audio R2 Base : 1f21c000
FastLogo mod uld
get scart fast_blanking port fails
--------------------No scart2 MUX.
--------------------No scart2 MUX.
[_MApi_XC_Sys_Init_Panel][818]
???????? BACKEND DEVICE [ NONE ] !! ????????
_MApi_XC_Sys_Init_Panel
g_PNL_TypeSel : 0
MDrv_PNL_Init u32PnlRiuBaseAddr = 42c99000
MDrv_PNL_Init u32PMRiuBaseAddr = 40d63000
[LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x08bd584c]
[LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x08bd641c]
TDaPanel[1][PDP] Building...
TDaVideoEnhancer[1][PDP] Building...
3D IC Building...
[_MApi_XC_Sys_Init_XC][1052]
[XC,Version][0;36m
[mHAL_MIU_MaskReq not support client ID:55!
[ResetSystemConfig] Amp , Tuner
HAL_MIU_MaskReq not support client ID:55!
HAL_MIU_UnMaskReq not support client ID:55!
HAL_MIU_UnMaskReq not support client ID:55!
HAL_MIU_MaskReq not support client ID:55!
HAL_MIU_MaskReq not support client ID:55!
MApi_PVR_Init_AESDMA
MApi_PVR_Init_AESDMA
[PANEL_KEY_TYPE] : 0
Product Type : LCD !!
get scart fast_blanking port fails
--------------------No scart2 MUX.
--------------------No scart2 MUX.
@@Enter DVB-C DEMOD_ENTRY
~~[Sub System Error] SsBuilderCommon.cpp:CreateSource():238 Num Of FM RADIO is INVALID : tdRet = -2147483584, iNumOfSource = 0!!
~~[Sub System Error] SsBuilderCommon.cpp:CreateSource():294 Num Of IPTV_CIP is INVALID : tdRet = -2147483584, iNumOfSource = 0!!~~[SSST] [DEFAULT] [SsStoreBase.cpp] SetScreenDefaultData, Data Transferred to Store...[315]!!!
???? Check Factory, Num of Amp is 1.
INTERN_DVBT_Power_On_Initialization.INTERN_DVBT_Version = R0.2
MDrv_WBLE_EnableBLE(): invoking Hal_WBLE_set_ble()
=======================================
[PQ File] version info:
X10_Main_0000000000000072 ver
X10_Sub ???????????????? ver!
X10_Main_Ex_0000000000000014 ver
X10_Sub_Ex ???????????????? ver!
=======================================
Before uPrintMask = [0x00000000] , m_uSsPrintMask=[0x10000000]
After m_uSsPrintMask=[0x10000000]
get the shared memory for graphic successfully. key: 3698, size: 4850888
SHM flag is 0x0
Source ID 0x44
PCMCIA open /dev/system success >> SYS_fd= 13
[SdCI_Set][BYPASS][1]
[Si2176_PowerUpWithPatch][1001]
Panel is already initialized, skip panel setting
!!!!! Si2176 Firmware Download Start
MApi_DMX_GetLibVer 00318138
[Si2176_PowerUpWithPatch][1067]
Panel Panel Config Type FHD 60/50Hz
====== Send Jack ID Command to SubMicom ! =====
!!!!! Si2176 Firmware Download End
Select panel E_PANEL_UNDEFINED
Create Default Panel
LightSensorMonitor Creat...Start Brightness Step = [20]
[LightSensorMonitor] Start !
the length of the thread name exceeds 15, it will be truncated to 15 chars
Get Boot Status ACK! status : 1[0x0]
[t_SetBootRecordTimeOn] m_bBootRecordTimeOn : 0
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
Get Submicom EcoICType = ECO_SENSOR_NEXTCHIP_NLS1006! Submicom Read Reg [0]
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
[Si2176_PowerUpWithPatch][1113]
SourceMode 0x802
============ CHECK FAST BOOT Exception [3304]======
ECO_SENSOR_NEXTCHIP_NLS1006 Reg set [0x1A, 0x3E, 0x20, 0x6A,
>>[ERR:TDsBackendPanel.cpp] Create():124 No Backend Device is connected.. Please check your panel!!
get the shared memory for graphic successfully. key: 3698, size: 4850888
SHM flag is 0x78
!!!!!!!!![gfx_SetPivot] Fatal Error 1 create gfx Mutex fail
Crop win invalid!!
Disp win invalid!!
MApi_XC_SetWindow failed because of InitData wrong, please update header file and compile again
[TDaSystem::PrimePivotModeConfig] PivotConfig Size [1920 * 1080], Mode [3]
Default VFreq = 50 hz
DSP code loaded successfully
set init frequ , [50]
[TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!
>>[ERR:RectangleHelper.cpp] Create():2195 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!
>>[ERR:RectangleHelper.cpp] Create():2195 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!
>>[ERR:RectangleHelper.cpp] Create():2195 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!
>>[ERR:RectangleHelper.cpp] Create():2195 [eResolution Create Type=0] Si2176_Initialize end
set prescale DSP type error!! 7
set prescale DSP type error!! 7
[ROSE_MW ] FunctionMapper[CreateAudioDecoder, 0x2fe8af0]
[ROSE_MW ] FunctionMapper[CreateAudioRenderer, 0x2fe8a00]
[ROSE_MW ] FunctionMapper[CreateContainer, 0x2fe88f8]
[ROSE_MW ] FunctionMapper[CreatePicturePlayer, 0x2fe8774]
[ROSE_MW ] FunctionMapper[CreatePlayer, 0x2fe87f8]
[ROSE_MW ] FunctionMapper[CreateVideoDecoder, 0x2fe8a78]
[ROSE_MW ] FunctionMapper[CreateVideoRenderer, 0x2fe8988]
[ROSE_MW ] FunctionMapper[GetSystemClockTick, 0x2fe8b68]
[ROSE_MW ] FunctionMapper[GetUniPlayerMediator, 0x2fe8be8]
[ROSE_MW ] FunctionMapper[UniPlayer_ClearScreen, 0x2f8d530]
[ROSE_MW ] FunctionMapper[UniPlayer_PfmInterfaceDebugMenu, 0x2ffb404]
[ROSE_MW ] FunctionMapper[UniPlayer_PlayerDebugMenu, 0x2fb70c8]
[ROSE_MW ] FunctionMapper[UniPlayer_YUVToJPEG, 0x2fb40dc]
[PrimeShare] t_SetSPDIF_PCM_Level : eSrc 0, DDCompMode 1 (RFmode:1), Factory value 1, SDAL set value 0
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
set prescale DSP type error!! 7
>>[ERR:TDsPrimeAudioProcessor.cpp] SetFactoryItem():3433 Not Support Factory Item [565] [] !!!
>>[ERR:TDsPrimeAudioProcessor.cpp] SetFactoryItem():3433 Not Support Factory Item [0] [] !!!
[3s 593ms][DEBUG][CUniPlayerMediator][53]
[3s 607ms][DEBUG][InstallAudioMuteCallback][1316]
Mirror! H=0,V=0
[LvdsFormat_Init @ 0227] LVDS formt (0001)
[MHal_PNL_SetLVDSFormat_Cus @ 0010] LVDS formt (0001)
Param_u16Fmodulation = 4
DDR_u16Deviation = 10
MMIO base:42c99000 uRegBase:10d00
---> u16Fmodulation = 30 u16FDeviation = 10
---> Loop_First:2 Loop_Second:3
---> Input_first:1 Input_second:1
---> uDDFSET = 0x1a2e8b
---> DDR_MHZ = 0x318 (792 MHz)
---> DDFSPAN = 0x44b (1099)
---> DDFSTEP = 0xf (15)
MMIO base:42c99000 uRegBase:10d80
---> u16Fmodulation = 30 u16FDeviation = 10
---> Loop_First:2 Loop_Second:3
---> Input_first:1 Input_second:1
---> uDDFSET = 0x1a2e8b
---> DDR_MHZ = 0x318 (792 MHz)
---> DDFSPAN = 0x44b (1099)
---> DDFSTEP = 0xf (15)
>>[ERR:TDiVideoEnhancer.cpp] SetPictureInformation():177 Null Fuction Call !!!Must Check Implementation Code...
end of Melody for on
Has Chmap
==================================================
|||||||||||||||||| PWM Enable ..!!! ||||||||||||||||||
---------- GLOBAL INITIALIZATION START [3764]----
|||||||||||||||||| Inverter On ..!!! ||||||||||||||||||
[OVD] ENABLE =[0], SEQ type=[0],OVD_3D_MOVIE_DUTY_LIMIT=[256], OVD_3D_DYNAMIC_DUTY_LIMIT=[307]
==================================================
START DIMMING CALLBACK
>>[ERR:TDiVideoEnhancer.cpp] SetPictureInformation():177 Null Fuction Call !!!Must Check Implementation Code...
>>[ERR:TDsPrimeAudioProcessor.cpp] Connect():657 !!!error : eSrc = [0x0] or eWindowType = [0xffffffff]
============ CHECK FAST BOOT Exception [4016]======
Product version : [36m T-MST10PDEUC-1030.0 [m
## Core Software Platform (TM) 1.1 : DTP-SP-0101 (RELEASE)
## (_USE_SYSTEM_TIME_ : N)(__CSP_GLIBC__)
Copyright (C) SAMSUNG Electronics Co.,Ltd.
CSP No sched_yield()
TCMW::PreInitialize() start
[PS] [COM_EVN] [EventSender.cpp:InstallFreezeCallback():121] [PS] [PLY_CTL] [PVRSystemPlayer.cpp:PVRSystemPlayer():39] ProfileManager::t_CompareMagicKey() line[621] Offset 0 Size 4]
ProfileManager::t_CompareMagicKey() line[629] CRC: 82251364, magicKey: 82251364ProfileManager::Init() line[103] Mark 2766
[SdCI_Set][BYPASS][1]
Profile AgentID Offset Size
[DEFAULT/Info] 0 : 43 17 0 2c
[DEFAULT/Info] 1 : Data:
[DEFAULT/Info] 2 : 0 0 0 0 0 0 88 be ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 3 : ff ff ff ff ff ff ff ff 0 0 0 0
[DEFAULT/Info] 4 : -----------------------------------------------------------------
[DEFAULT/Info] 5 : 43 19 2c 8
[DEFAULT/Info] 6 : Data:
[DEFAULT/Info] 7 : ff ff ff ff 1 0 0 0
[DEFAULT/Info] 8 : -----------------------------------------------------------------
[DEFAULT/Info] 9 : 43 23 34 28
[DEFAULT/Info] 10 : Data:
[DEFAULT/Info] 11 : 0 0 0 0 0 0 0 0 0 0 0 0 8 0 0 0 1 0 0 0 3c 0 0 0 1 0 0 0 1 0 0 0
[DEFAULT/Info] 12 : 0 0 0 0 1 0 0 0
[DEFAULT/Info] 13 : -----------------------------------------------------------------
[DEFAULT/Info] 14 : 43 26 5c 230
[DEFAULT/Info] 15 : Data:
[DEFAULT/Info] 16 : ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff
[DEFAULT/Info] 17 : ff ff 0 7 0 0 0 0 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 18 : 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff
[DEFAULT/Info] 19 : ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff 0 7 0 0 0 0 0 0 0 0 ff ff ff ff
[DEFAULT/Info] 20 : ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 21 : ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff
[DEFAULT/Info] 22 : ff ff 0 7 0 0 0 0 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 23 : 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff
[DEFAULT/Info] 24 : ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff 0 7 0 0 0 0 0 0 0 0 ff ff ff ff
[DEFAULT/Info] 25 : ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 26 : ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff
[DEFAULT/Info] 27 : ff ff 0 7 0 0 0 0 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 28 : 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff
[DEFAULT/Info] 29 : ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff 0 7 0 0 0 0 0 0 0 0 ff ff ff ff
[DEFAULT/Info] 30 : ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 31 : ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff 0 0 0 0 ff ff ff ff ff ff ff ff
[DEFAULT/Info] 32 : ff ff 0 7 0 0 0 0 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 33 : 0 0 0 0 ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 34 : -----------------------------------------------------------------
[DEFAULT/Info] 35 : ####Reset TCTvManagerBase::Create####
[DEFAULT/Info] 36 : ####Reset Channel Magic Key ! old = 1201005 new = 1201005 !!!####
[M_TMS/Fatal] 37 : TCNameMemory::Load() => Couldn't create file /mtd_chmap/DefaultAuthority
[M_TMS/Fatal] 38 : TCBouquetMemory::Load() => Couldn't create file /mtd_chmap/Bouquets
[DEFAULT/Debugging] 39 : TCChSortModeDB::LoadSortMode Cannot Open File /mtd_chmap/ChSortMode
[DEFAULT/Debugging] 40 : FlagHotelMode, hotelProductType[0]
[DEFAULT/Debugging] 41 : FlagUseHotelMixedMap, factoryMapUse[0]
>>[ERR:TDiDemodulator.cpp] GetModSwitchingTime():62 Null Fuction Call !!!Must Check Implementation Code...
[DEFAULT/Debugging] 42 : TCTunerConf::Initialize - productOption : 1
[DEFAULT/Fatal] 43 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:1 TvMode:0 Country:13,BroadCasterId :-1)
[DEFAULT/Debugging] 44 : TCTunerConf::Initialize - productOption : 1
[DEFAULT/Fatal] 45 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:6 TvMode:0 Country:13,BroadCasterId :-1)
[DEFAULT/Fatal] 46 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:7 TvMode:0 Country:13,BroadCasterId :-1)
[DEFAULT/Fatal] 47 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:4 TvMode:0 Country:13,BroadCasterId :-1)
[DEFAULT/Debugging] 48 : TCTunerConf::Initialize - productOption : 1
[DEFAULT/Fatal] 49 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:9 TvMode:0 Country:13,BroadCasterId :-1)
[DEFAULT/Debugging] 50 : TCTunerConf::Initialize - productOption : 1
[DEFAULT/Fatal] 51 : [TCDMS::Init] DMS Initialized.
[DEFAULT/Debugging] 52 : LSC Resource enabled! Network support : 2 (1 : Cable, 2 : WiFi Ext., 3: WiFi Int.
TCMW::PreInitialize() end
TCMW::Initialize() start
CAppInitializer start
[DEFAULT/Fatal] 53 : [t_FillChannelInfo] FoundChannel - retVal:1 52(23-65534),2
[DEFAULT/Fatal] 54 : [t_InitChannel] CurrentChannel - 52(23-65534),2
[DEFAULT/Fatal] 55 : [t_FillChannelInfo] FoundChannel - retVal:1 52(23-65534),2
[DEFAULT/Fatal] 56 : [m_UpdateBootChannel] SetChannel - 52(23-65534),2
Shadow 2.6 (revision number: DTP-BP-GFX-0328-Mstar_X10P_DEU-04-Release) is being initialized.[M_DSM_OC/Fatal] 57 : [TCObjManagerBase::Create] Country = 13
[SS][Platform]ShadowSS Version - 00.18
[SS][Platform:109] Platform Initialize Start -- Start Planes Create
get the shared memory for graphic successfully. key: 3698, size: 4850888
SHM flag is 0x78
[Graphic Version]- [0;32m 081 [m
[0;33m[1466]:int gfx_Init()[0;0m. #@#@#@ pid:67
[GOP Version]: [0;32m 0001 [m | BuildNum: [0;32m 0000 [m | ChangeList : [0;32m 41757600 [m
====================
First GOP driver instance, flush GWIN HW
====================
[M_DSM_OC/Fatal] 58 : [TCObjManagerBase::Create] PROFILE MHEG (or No data service supported : RAM used)
TCMW::Initialize() end
[DEFAULT/Debugging] 59 : [TCTv::Power] powerType : 3, bootReason : -1
[DEFAULT/Debugging] 60 : MW Initilize Completed
==================================================
----------- GLOBAL INITIALIZATION END [5408]------
==================================================
[DEFAULT/Debugging] 61 : WaitForFastBoot End
[DEFAULT/Debugging] 62 : TCBootingChannelInfo::Set is called...[BootReason : -1]
[DEFAULT/Debugging] 63 : FlagHospitalMode[0]
~~[SSTV] [DEFAULT] [TPATv.cpp] Power, TPCTv::Power, ######## 3 ######## Param : 0
~~[SSTV] [DEFAULT] [TPATv.cpp] PoweMDrv_DDC2BI_light_Init.832 Fail
r, TPCTv::Power, Return Value Check : 1
~~[SSTV] [DEFAULT] [PowerControl.cpp] t_ProcessPowerUp, ------------------- NORMAL MODE ------------------
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [START]SHOW_TYPE_ON, SHOW_STATE_OFF
ClearWhite onoff=[0], value=[6], p.mode=[1], m_bFactoryInOut=[0]
~~[SSTV] [DEFAULT] [PowerControl.cpp] t_ProcessPowerUp, --------------- NORMAL MODE COMPLETE--------------
~~[SSTV] [DEFAULT] [PowerControl.cpp] t_SendSystemReady, System proccess >>>>> [ SYSTEM_READY ]
[DEFAULT/Debugging] 64 : [TCSystemMonitorManager::t_OnEvent] TCTv::EVENT_SYSTEM_READY
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [END]SHOW_TYPE_ON, SHOW_STATE_STOP
[PrimeShare] t_GetAudioOutPutGain : cRegionIndex = 1, cAudioFormatIndex = 4, InputGain = 0 OutputGain = 0
[PrimeShare] t_SetAudioOutPutGain : eSoundId = 0, Input Gain = 0, Output Gain = 0
[PrimeShare] t_SetSPDIF_PCM_Level : eSrc 0, DDCompMode 1 (RFmode:1), Factory value 1, SDAL set value 0
ERROR!!! CAN'T SUCCESSFULLY CONVERT FROM VA(0) TO PA(0)
[PS] [COM_EVN] [EventSender.cpp:InstallEventCallback():67] MApi_DDC2BI_CurrentSource.239
>>[ERR:TDsPrimeHdmiProcessor.cpp] Connect():646 Connect...
[TPAWindow.cpp][ConnectSource][WID:0][CALL]. eSourceId=68
~~[SSWD] [DEFAULT] [WindowControl.cpp] t_SetFastbootSource, [FASTBOOT] Source(SOURCE_TYPE_HDMI2), Window(WINDOW_MAIN)
PINK_GARBAGE_DETECT: MDrv_XC_reset_ip@128
HAL_MIU_MaskReq not support client ID:55!
HAL_MIU_MaskReq not support client ID:55!
HAL_MIU_UnMaskReq not support client ID:55!
HAL_MIU_UnMaskReq not support client ID:55!
~~[SSWD] [DEFAULT] [WindowControl.cpp] t_SetResolutionInfo, [WINDOW_MAIN][Scaler]
TDResolution_k : [21]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [5000], [1], [0], [0], [0], [0], [0], [0], [0], [2050], [1], [0], [19], [0], [0]
>>[ERR:TDsPrimeDemux.cpp] GetDemuxHandle():469 Not Connect Demux...
HAL_MIU_MaskReq not support client ID:55!
HAL_MIU_MaskReq not support client ID:55!
Source : 2050 Window Type : 0 Back End Decoder Type : 8, tdRet=0
HAL_MIU_UnMaskReq not support client ID:55!
HAL_MIU_UnMaskReq not support client ID:55!
[PrimeShare] t_SetSPDIF_PCM_Level : eSrc 802, DDCompMode 1 (RFmode:1), Factory value 1, SDAL set value 0
[PrimeShare] t_GetAudioOutPutGain : cRegionIndex = 1, cAudioFormatIndex = 4, InputGain = 0 OutputGain = 0
[PrimeShare] t_SetAudioOutPutGain : eSoundId = 0, Input Gain = 0, Output Gain = 0
[TPAWindow.cpp][ConnectSource][WID:0][END]..
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [START]SHOW_TYPE_ON, SHOW_STATE_OFF
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [END]SHOW_TYPE_ON, SHOW_STATE_STOP
==================== DCDsmManager pid = 67
[SS][X6_Screen32.cpp:X6_Screen32:164] Create SCREEN0 (width : 1280, height : 720, address: 0x47f16000)
ERROR!!! CAN'T SUCCESSFULLY CONVERT FROM VA(0) TO PA(0)
[SdGfx_Set:2114-TID(147)] screenNum(1)
[SS][X6_Screen32.cpp:X6_Screen32:164] Create SCREEN1 (width : 1280, height : 720, address: 0x48a85000)
ERROR!!! CAN'T SUCCESSFULLY CONVERT FROM VA(0) TO PA(0)
[SS][X6_Screen32.cpp:X6_Screen32:164] Create SCREEN2 (width : 960, height : 540, address: 0x57318000)
[SdGfx_Set:2114-TID(147)] screenNum(2)
[t_GetBootRecordTimeOn] m_bBootRecordTimeOn : 0
[SdDemux_Set][SD_DEMUX_PORT_0][4]
Source : 513 Video ID : 0
create one more decoder for X10 case
E_VDEC_UNMUTE CallBack be Reg<<<<<<<<<<<<<<<<<<
[TPAWindow.cpp][ConnectSource][WID:4][CALL]. eSourceId=53
~~[SSWD] [DEFAULT] [WindowControl.cpp] t_SetFastbootSource, [FASTBOOT] Invalid Window (4), Source(53)
[SS][X6_Screen8.cpp:X6_Screen8:98] Create SCREEN3 (width : 960, height : 540, address: 57318000)
[SdGfx_Set:2114-TID(147)] screenNum(2)
George :VE SetMode, VFreq=0, Hdupliate=0, Interlace=0
George :VE->H:(2, 0), V:(65531, 0)
George :SC->H:(2, 0), V:(65531, 0)
ADC_CVBSOUT_DISABLE_1 , [5]
~~[SSWD] [DEFAULT] [WindowControl.cpp] t_SetResolutionInfo, [WINDOW_SCART][Scaler]
TDResolution_k : [21]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [5000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [19], [0], [0]
>>[PrimeShare] t_GetExtInSourceToPort: Error Source To Port Set Control Error eSource = 0x201, Port = 6 !!!!!!!!!!!!!!!!!!!!!
Source : 513 Window Type : 4 Back End Decoder Type : 7, tdRet=0
[ERROR][SdAudioDec_Start():525] SD_NOT_OK
>>[ERR:TDsPrimeAudioProcessor.cpp] Connect():852 - SDAL ERROR [-1] !!!
[TPAWindow.cpp][ConnectSource][WID:4][END]..
=========> vdec_u8Idx=0x0, u32VdecStreamId=01010
HAL_VPU_EX_SetDbgLevel eLevel=0x0
[SS][X6_Screen8.cpp:X6_Screen8:217] Create SCREEN3 Complete
[SS][Platform][Platform:131] Support 8Bit Plane
[vdec][dbg][0x1][1:mpeg][0x0b:h264]
[DEFAULT/Debugging] 65 : [TCSourceConf::SetResolution][Source : 53][Listener Cnt : 1] real_horizontal:720 real_vertical:576 real_vfreq:2500.000000 resolution:13
[DEFAULT/Debugging] 66 : [TCSourceConf::SetResolution][Source : 53][res : 13] TPCSource::SetResolution() will be called.
~~[SSWD] [DEFAULT] [WindowControl.cpp] t_SetResolutionInfo, [WINDOW_SCART][Scaler]
TDResolution_k : [21]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [2500], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [19], [0], [0]
[DEFAULT/Debugging] 67 : TCDisplay::t_OnEvent(), TCDMS::EVENT_SET_READY
[DEFAULT/Debugging] 68 : [TCDisplayMain::m_SetReady] ready=1, eventData=10,t_windowId=0
[DEFAULT/Debugging] 69 : [TCDisplayMain::m_SetReady] SendEvent(TCTv::EVENT_SYSTEM_READY)
[DEFAULT/Debugging] 70 : TCDisplay::t_OnEvent(), TCDMS::EVENT_SET_READY
[DEFAULT/Debugging] 71 : TCDisplay::t_OnEvent(), TCDMS::EVENT_SET_READY
[DEFAULT/Debugging] 72 : TCDisplay::t_OnEvent(), TCDMS::EVENT_SET_READY
[DEFAULT/Debugging] 73 : TCDisplay::t_OnEvent(), TCDMS::EVENT_SET_READY
[DEFAULT/Debugging] 74 : TCDisplay::t_OnEvent(), TCDMS::EVENT_SET_READY
[SdGfx_Set:2114-TID(147)] screenNum(2)
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [START]SHOW_TYPE_NO_SIGNAL, SHOW_STATE_STOP
[TDsPrimeScaler::SetMute][WID:0] Mute [ON]
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [END]SHOW_TYPE_NO_SIGNAL, SHOW_STATE_NO_SIGNAL
ERROR!!! CAN'T SUCCESSFULLY CONVERT FROM VA(0) TO PA(0)
[SS][Platform][Platform:150] Platform Initialize End -- Complete Planes Create
0 (4294967295): Initialize Cubic 3D profile DTP-BP-GFX-0328-Mstar_X10P_DEU-02-Release
[A_APPMW/Fatal] 75 : [CTaskManager::t_InitTargetDefine] PanelKey is [6]
[SdGfx_Set:2114-TID(147)] screenNum(0)
[DTVInputService::t_Create] m_nKeyInputTime = 6212
[DEFAULT/Warning] 76 : Specified confliction type has already been set !!
[DEFAULT/Warning] 77 : Specified confliction type has already been set !!
[DEFAULT/Warning] 78 : Specified confliction type has already been set !!
[DEFAULT/Warning] 79 : Specified confliction type has already been set !!
[DEFAULT/Warning] 80 : Specified confliction type has already been set !!
[DEFAULT/Warning] 81 : Specified confliction type has already been set !!
[DEFAULT/Warning] 82 : Specified confliction type has already been set !!
[DEFAULT/Warning] 83 : Specified confliction type has already been set !!
[DEFAULT/Warning] 84 : Specified confliction type has already been set !!
[DEFAULT/Warning] 85 : Specified confliction type has already been set !!
[DEFAULT/Warning] 86 : Specified confliction type has already been set !!
[DEFAULT/Warning] 87 : Specified confliction type has already been set !!
[DEFAULT/Warning] 88 : Specified confliction type has already been set !!
[DEFAULT/Warning] 89 : Specified confliction type has already been set !!
[DEFAULT/Warning] 90 : Specified confliction type has already been set !!
[DEFAULT/Warning] 91 : Specified confliction type has already been set !!
~~[SSSC] [DEFAULT] [SsScreenBase.cpp] Register3DSettingCallback, Register m_pfn3DSettingCallback[0] = 0x150afd0
Create WebBrowser
CAppInitializer end
Not a GINGA_NCL build
[DEFAULT/Debugging] 92 : [t_Create:1333] System is already ready. So forcely initialize application layer : 6356
## [EnableScreen] Screen(0), Caller(2)
## [EnableScreen] Screen(1), Caller(2)
[static MutexSafeCreator* MutexSafeCreator::GetInstance():50] MutexSafeCreator Success...
[DevMgr/Fatal] 93 : [Get:289] Device Manager START...
[DEFAULT/Debugging] 94 : [t_OnSystemReady:6410] First, Display Channel Banner Start(6396)
>>[ERR:TDiDemodulator.cpp] GetPLP_List():152 Null Fuction Call !!!Must Check Implementation Code...
[DevMgr/Fatal] 95 : [t_OnEvent:331] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0)
[virtual DevicePollingFLASH::~DevicePollingFLASH()]
[DevMgr/Fatal] 96 : [Subscribe:501] Subscriber : hid-dm-entry [0x8d5ced0] Event : 25112
[Client/Fatal] 97 : [CMediaConnectImpl.cpp:970] RegisterDeviceCallback called : 51928696
[DEFAULT/Debugging] 98 : AddSection.. chTypeOfWinId = -1 old : [-1] type = -1 , new : [-1] type = -1 , chProg's chType = 2
[SSL_library_init] Initializing...
[AP_INFOLINK/Fatal] 99 : CNNaviAppBase::t_Create()
[DevMgr/Fatal] 100 : [InitiateSCONNECT:1129] Success : MediaConnect!!!
~~[SSSC] [DEFAULT] [SsScreenBase.cpp] Register3DSettingCallback, Register m_pfn3DSettingCallback[1] = 0xf58d94
[A_APPMW/Fatal] 101 : [CAppUtil::CheckResetAfterPnpOTN]
[A_APPMW/Fatal] 102 : [CAppUtil::CheckResetAfterPnpOTN] PnPcheck File doesn't exist
[AP_INFOLINK/Fatal] 103 : CNNaviLoadingBase::Create()
[AP_INFOLINK/Fatal] 104 : CNNaviLoadingBase::Create()OSD_RESOLUTION_1280X720
[AP_INFOLINK/Fatal] 105 : Create Loading OSD for TV or Monitor
mount mtd_contents
mount mtd_rwcommon
[AP_INFOLINK/Fatal] 106 : END CNNaviLoadingBase::Create()
[AP_INFOLINK/Fatal] 107 : CNNaviMsg::Create()
mount mtd_emanual
mount mtd_swu
BrowserConnector::InitBrowserManagerServer()
BrowserConnector >> Initialize Server!!sys time : 6880,Frm cnt: 2 ,Err cnt: 0, Skip cnt: 1, Drop cnt: 0, STC: 12288914, PTS: 174, Delta: 0
George :VE SetMode, VFreq=500, Hdupliate=0, Interlace=1
George :VE->H:(158, 720), V:(6, 576)
George :SC->H:(158, 720), V:(6, 576)
[6s 951ms][DEBUG][GetRenderer][97] GetRenderer:::::::::::::::97
sys time : 6986,Frm cnt: 5 ,Err cnt: 0, Skip cnt: 2, Drop cnt: 0, STC: 12289020, PTS: 12289416, Delta: 421
~~[SSIF] [DEFAULT] [SsInfoBase.cpp] SetResolutionFlag, [[type=0]SetResolutionFlag]Aspect Ratio Change[1]!!
[DEFAULT/Debugging] 108 : [TCDTv_NormalSt::t_OnResolution] real_horizontal:720 real_vertical:576 real_vfreq:2500.000000 resolution:13
[DEFAULT/Debugging] 109 : t_MonitorSIOnPAT!!!!! EIT Monitoring start!!!!!
[SS][GLRenderer][Create():156][ScreenIndex:0] Try Create WindowSurface
[SS][GLRenderer][Create()][Line:173][WindowSurfaceSize:1280x720]
~~[SSSO] [DEFAULT] [ShowEventMonitor.cpp] Create, [SOURCE_TYPE_DTV1] Called
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [START]SHOW_TYPE_START, SHOW_STATE_STOP
[TDsPrimeScaler::SetMute][WID:1] Mute [OFF]
>>[ERR:TDsPrimeScaler.cpp] SetBackground():1752 - SDAL ERROR [-6] !!!
>>[ERR:TDsPrimeScaler.cpp] SetBackground():1758 It failed in setting a video background color!!! (0, 0, 0)
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [END]SHOW_TYPE_START, SHOW_STATE_START
[PrimeShare] t_GetAudioOutPutGain : cRegionIndex = 1, cAudioFormatIndex = 2, InputGain = 0 OutputGain = 0
>>[ERR:PrimeShare.cpp] t_SetAudioOutPutGain():499 - SDAL ERROR [-2] !!!
>>[ERR:PrimeShare.cpp] t_SetAudioOutPutGain():502 - SDAL ERROR [-2] !!!
[PrimeShare] t_SetAudioOutPutGain : eSoundId = 1, Input Gain = 0, Output Gain = 0
==Audio DSP1 code is same(3), no need to reload==
==Audio DSP1 code is same(3), no need to reload==
[DEFAULT/Debugging] 110 : [TCIMSUtil::IsSameMuxService] lhsCh and rhsCh are in the same mux.
[SdCI_Set][BYPASS][1]
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [START]SHOW_TYPE_START, SHOW_STATE_START
>>[ERR:TDsPrimeScaler.cpp] SetBackground():1752 - SDAL ERROR [-6] !!!
>>[ERR:TDsPrimeScaler.cpp] SetBackground():1758 It failed in setting a video background color!!! (0, 0, 0)
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [END]SHOW_TYPE_START, SHOW_STATE_START
==Audio DSP1 code is same(3), no need to reload==
[AP_INFOLINK/Fatal] 111 : filename is = [libXserver.so]
[SdCI_Set][BYPASS][1]
[A_APPMW/Fatal] 112 : [CFunctionKeyWnd] Create() return true
[A_APPMW/Fatal] 113 : [DTVInputService] t_CreateFunctionOSD() : m_bCreatedFunctionWnd[1]
[PIXMAN] ARM SIMD Enabled...
[PIXMAN] ARM NEON Enabled...
mali: MaliSetup done
(EE) Failed to load module "mouse" (module does not exist, 0)
(EE) Failed to load module "kbd" (module does not exist, 0)
mali: MaliIdentify done
flags = 0x0
scrnIndex = -1, planeIndex = SD_GFX1
mali: mali_open done
mali: MaliHWProbe done
mali: MaliProbe done
mali: MaliGetRec done
mali: MaliHWGetRec done
scrnIndex = 0, planeIndex = SD_GFX1
mali: mali_open done
mali: MaliHWInit done
mali: MaliHWGetDepth done
mali: HWGetVidmem done
mali: MaliHWGetName done
(EE) MALI(0): mali_drm_open_master DRM OPEN (fd: 0x32)
mali: MaliHWGetID done
mali: FBDev_crtc_config done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetMode done
mali: MaliHWSetVideoModes done
mali: MaliPreInit done
mali: MaliHWMapVidmem done
mali: MaliHWSave done
mali: MaliHWSetMode done
mali: MaliHWModeInit done
mali: MaliHWSaveScreen done
mali: MaliHWAdjustFrame done
[SdGfx_Set:2114-TID(177)] screenNum(1)
[SdGfx_Set:2114-TID(177)] screenNum(1)
mali: MaliScreenInit done
fbdev_crtc_config_resize: width = 1280 height = 720
fbdev_crtc_config_resize: pitch = 0x1400
[SdGfx_Set:2114-TID(177)] screenNum(1)
[SdGfx_Set:2114-TID(177)] screenNum(1)
(EE) Failed to load module "mouse" (module does not exist, 0)
(EE) No input driver matching `mouse'
(EE) Failed to load module "kbd" (module does not exist, 0)
(EE) No input driver matching `kbd'
mali: MaliHWSaveScreen done
[AP_INFOLINK/Fatal] 114 : [CNNaviAppBase::t_Create(1070)] InitXServer success.
[AP_FULLBROWSER/Fatal] 115 : Use rocommon Browser Font.conf
[AP_FULLBROWSER/Fatal] 116 : Excute rocommon Browser.
[AP_FULLBROWSER/Fatal] 117 : Launcher path = /mtd_rocommon/WebBrowser/bin/BrowserLauncher
[AP_FULLBROWSER/Fatal] 118 : Url = UI_URL=file:///mtd_rocommon/WebBrowser/WebkitUI/Index.html
[AP_FULLBROWSER/Fatal] 119 : Mime = XDG_DATA_HOME=/mtd_rocommon/WebBrowser/.local/share/
[AP_FULLBROWSER/Fatal] 120 : Plugins = MOZ_PLUGIN_PATH=/mtd_down/emps/empBrowserCommonPlugin/plugins:/mtd_down/emps/empWebBrowserDRI/plugins:/mtd_rocommon/WebBrowser/plugins/:/mtd_rocommon/WebBrowser/plugins:/mtd_rocommon/Webkit/Plugins/Common
[AP_FULLBROWSER/Fatal] 121 : Font config = FONTCONFIG_FILE=/mtd_rocommon/WebBrowser/fonts/fonts.conf
[AP_FULLBROWSER/Fatal] 122 : Country = EU
[AP_FULLBROWSER/Fatal] 123 : PreLoading = 1
[AP_FULLBROWSER/Fatal] 124 : Max Tab : 2, Max Memory : 180, Max Flash : 7
[36m ===[AGC:31984][ifAgcOut:0x7cf0] [m
[AP_FULLBROWSER/Fatal] 125 : GetPhysicalResolution [1920 1080]
[A_MHEG_PORTING_LAYER/Fatal] 126 : CHTTPDispatcher: created m_pHttpIf
[A_MHEG_PORTING_LAYER/Fatal] 127 : CHTTPDispatcher: created m_pHttps
[DevMgr/Fatal] 128 : [Subscribe:501] Subscriber : MHEG [0x8eb8d68] Event : 25104
[DevMgr/Fatal] 129 : [Subscribe:501] Subscriber : MHEG [0x8eb8d68] Event : 25105
Yungaru GetModelSting in TD
[NetworkManager::GetInstance|92] NetworkManagerMutex Creation
[NetworkManager] Default Network Active Type is : WIRED
[NET_MW/Fatal] 130 : [Create][line:247] [NetworkManager::Create] ==> Begin
NetworkDHCPMonitor::GetInstance()
[NET_MW/Fatal] 131 : [Create][line:281] [NetworkManager::Create]==> End
[NET_MW/Fatal] 132 : [GetInstance][line:125] NetworkManager Creation
[DEFAULT/Info] 133 : CGemstarLibrary::t_LoadLibrary
>>[ERR:TDsPrimePanel.cpp] SetCondition():969 Input Parameter [13] is error !!
SetCondition eCondition = [10] bValue=[0]
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [START]SHOW_TYPE_NO_SIGNAL, SHOW_STATE_NO_SIGNAL
~~[SSWD] [DEFAULT] [ShowControl.cpp] Show, [END]SHOW_TYPE_NO_SIGNAL, SHOW_STATE_NO_SIGNAL
Check Key prDvCertTem
[Manager/Fatal] 156 : [Create:111] ContentsManager Create complete!!!:)
[MMDOC/Fatal] 157 : m_RemoveAtList
[MMDOC/Fatal] 158 : bool CMMDocFactory::InitializeDoc(CMMDoc*) [Line345] InitializeDoc, 1 reference
[DBHandler/Fatal] 159 : [Create:110] DBHandler Creation DevID = -1 -> created by None
[DBHandler/Fatal] 160 : [Create:611] #### Create Database: /mtd_contents/-1
Check Key prPriv
[DBHandler/Fatal] 161 : [m_CheckIntegrity:807] DB Integrity Check is OK
[DBHandler/Fatal] 162 : [m_UseSynchronous:744] Can't get Device Info !!!! DevID = -1
[DBHandler/Fatal] 163 : [Destroy:251] Start Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 164 : [ReleaseCommandProcessorAndReceiver:120] Reference Count is 0. Delete receiver with key:/mtd_contents/-1|-1
[DBHandler/Fatal] 165 : [Destroy:714] Destroy CCMDBSQLiteReceiver m_bUseDB(1)
Check Key prbGrCert
[DBHandler/Fatal] 166 : [m_CloseDB:873] SQLite DB is closed
[DBHandler/Fatal] 167 : [ReleaseCollateRuleGetter:304] Release Rule Getter..... Language: 20
[DBHandler/Fatal] 168 : [Destroy:255] End Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 169 : [~CCMDBCommandProcessor:46] ~CCMDBCommandProcessor Destructor
[DBHandler/Fatal] 170 : [~CCMDBCommandReceiver:44] ~CCMDBCommandReceiver Destructor
[DeviceOrganizer/Fatal] 171 : [AddRefCount:121] AddRefCount is 2
[DBHandler/Fatal] 172 : [Create:110] DBHandler Creation DevID = -1 -> created by None
[DBHandler/Fatal] 173 : [Create:611] #### Create Database: /mtd_contents/-1
[DBHandler/Fatal] 174 : [m_CheckIntegrity:807] DB Integrity Check is OK
[DBHandler/Fatal[CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<<
] 175 : [m_UseSynchronous:744] Can't get Device Info !!!! DevID = -1
[DBHandler/Fatal] 176 : [Create:110] DBHandler Creation DevID = -1 -> created by None
[Browser/Fatal] 177 : [m_Create:2242] [CCMBrowserProxy] m_Create is success m_nBrowserId = 0
[Browser/Fatal] 178 : [~CCMBrowserProxy:43] [CCMBrowserProxy] destructor is called m_nBrowserId = 0
[Browser/Fatal] 179 : [m_Destroy:1506] [CCMBrowser] m_Destroy() is called
[DeviceOrganizer/Fatal] 180 : [m_GetDeviceTypeByPartitionKey:1184] pDevice is NULL
[DeviceOrganizer/Fatal] 181 : [GetDeviceId:196] disconnected device id form DB
[DBHandler/Fatal] 182 : [Destroy:251] Start Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 183 : [Destroy:255] End Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 184 : [Destroy:251] Start Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 185 : [ReleaseCommandProcessorAndReceiver:120] Reference Count is 0. Delete receiver with key:/mtd_contents/-1|-1
[DBHandler/Fatal] 186 : [Destroy:714] Destroy CCMDBSQLiteReceiver m_bUseDB(1)
[DBHandler/Fatal] 187 : [m_CloseDB:873] SQLite DB is closed
[DBHandler/Fatal] 188 : [ReleaseCollateRuleGetter:304] Release Rule Getter..... Language: 20
[DBHandler/Fatal] 189 : [Destroy:255] End Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 190 : [~CCMDBCommandReceiver:44] ~CCMDBCommandReceiver Destructor
[DBHandler/Fatal] 191 : [~CCMDBCommandProcessor:46] ~CCMDBCommandProcessor Destructor
Check Key przGrPri
[PSA] [CheckPlayreadyKey:832] return value 1
[CIP_AUTHULD] ====================================================
[CIP_AUTHULD] Authuld(X10P) Version : 3.1 : REL
[CIP_AUTHULD] ====================================================
[AP_PSA_ANALYZER/Fatal] 192 : [checkCPDeveloper] CP Signiture file byteStream read from SS Error [5]
[DevMgr/Fatal] 193 : [Subscribe:501] Subscriber : Dev App [0x8f41e40] Event : 25110
[DevMgr/Fatal] 194 : [Subscribe:501] Subscriber : Dev App [0x8f41e40] Event : 25137
[DevMgr/Fatal] 195 : [Subscribe:501] Subscriber : Dev App [0x8f41e40] Event : 25138
[DevMgr/Fatal] 196 : [Subscribe:501] Subscriber : Dev App [0x8f41e40] Event : 25106
[DevMgr/Fatal] 197 : [Subscribe:501] Subscriber : Dev App [0x8f41e40] Event : 25139
[DevMgr/Fatal] 198 : [Subscribe:501] Subscriber : Dev App [0x8f41e40] Event : 25104
[DEFAULT/Warning] 199 : Specified confliction type has already been set !!
[(null)/Fatal] 200 : PfmSystemInfo.cpp:286>/mtd_rwarea/UPGRADE_FLAG is already exist
[(null)/Fatal] 201 : PfmSystemInfo.cpp:342>cannot delete SWU_EMPTY_0 !!!
[(null)/Fatal] 202 : PfmSystemInfo.cpp:360>cannot delete SWU_EMPTY_1 !!!
[AP_SWU_CORE_APP/Fatal] 203 : SWUApp.cpp:263>t_Create complete- 0,0
[AP_SWU_CORE_SM/Fatal] 204 : PfmSystemInfo.cpp:895>Check standby power on proc call flag - Flag(0)
[NET_MW/Fatal] 205 : [AddConnection][line:498] [eth0]
[DevMgr/Fatal] 206 : [Subscribe:501] Subscriber : SWUUIApp [0x6d743070] Event : 25131
[DevMgr/Fatal] 207 : [Subscribe:501] Subscriber : SWUUIApp [0x6d743070] Event : 25104
NetworkDHCPMonitor::GetInstance()
Already created...
[DevMgr/Fatal] 208 : [Subscribe:501] Subscriber : SWUUIApp [0x6d743070] Event : 25129
[NET_MW/Fatal] 209 : [StopMonitoring][line:394] NetworkStatusMonitor::StopMonitoring
=> Auto : ifconfig eth0 up
[DevMgr/Fatal] 210 : [Subscribe:501] Subscriber : CloningApp [0x6d74b070] Event : 25104
[NET_SS/Fatal] 211 : [SetDNS][line:2116] /mtd_rwarea/resolv.conf: [nameserver 0.0.0.0
options timeout:3 attempts:1
]
[NET_MW/Fatal] 212 : [StartMonitoring][line:413] NetworkStatusMonitor::StartMonitoring
[NET_MW/Fatal] 213 : [AddConnection][line:548] Finished
[AP_DAE/Fatal] 214 : [m_CheckNetworkConnection] Network connection failed, no physical connection
[AP_DAE/Fatal] 215 : HbbTV is NOT supported
[AP_DAE/Fatal] 216 : t_Subscribe OK (7596 0, -1)
[Common/Fatal] 217 : [Destroy:139] #### Bookmark Manager is closed
[DeviceOrganizer/Fatal] 218 : [ReduceRefCount:152] ReduceRefCount is 1
[Browser/Fatal] 219 : [~CCMBrowser:50] ~CCMBrowser is destroyed: 0x8f31638!!!
[MMDOC/Fatal] 220 : void CMMUpdateMgr::LoadRecentlyList() [Line922] before LoadRecentlyList 10788
[MMDOC/Fatal] 221 : static ECMLocaleSet CMMDocConfig::GetLocaleSet() [Line349] get from pms is 1
[MMDOC/Fatal] 222 : static ECMLocaleSet CMMDocConfig::GetLocaleSet() [Line403] GetLocaleSet 0
[MMDOC/Fatal] 223 : m_RemoveAtList
[MMDOC/Fatal] 224 : bool CMMDocFactory::InitializeDoc(CMMDoc*) [Line345] InitializeDoc, 2 reference
[DeviceOrganizer/Fatal] 225 : [AddRefCount:121] AddRefCount is 2
[DBHandler/Fatal] 226 : [Create:110] DBHandler Creation DevID = -1 -> created by None
[DBHandler/Fatal] 227 : [Create:611] #### Create Database: /mtd_contents/-1
[DBHandler/Fatal] 228 : [m_CheckIntegrity:807] DB Integrity Check is OK
[DBHandler/Fatal] 229 : [m_UseSynchronous:744] Can't get Device Info !!!! DevID = -1
[DBHandler/Fatal] 230 : [Create:110] DBHandler Creation DevID = -1 -> created by None
[Browser/Fatal] 231 : [m_Create:2242] [CCMBrowserProxy] m_Create is success m_nBrowserId = 1
[MMDOC/Fatal] 232 : bool CMMDoc::m_OpenCursor(CMMDoc::BROWSER_TYPE) [Line4737] HANDLER IS 0
[Browser/Fatal] 233 : [Clustering:431] [CCMBrowserProxy] Category = 5, strName = recentlyplayed, nTimeout = -1, bAsync = 0
[Browser/Fatal] 234 : [StartClustering:197] [CCMBrowserStopState] Device Type: 8, Category: 5, strName: recentlyplayed
[Browser/Fatal] 235 : [Clustering:96] [CCMPlaylist] Category[5], strPlayListName:recentlyplayed, bAsync: 0
[Browser/Fatal] 236 : [Clustering:147] [CCMPlaylistHandler] Clustering Success!!!! Total Count: 32
[Browser/Fatal] 237 : [Clustering:437] [CCMBrowserProxy] Clustering is completed by sync... Result = 0
[Browser/Fatal] 238 : [Clustering:444] [CCMBrowserProxy] Clustering is end!!! Result = 0
[MMDOC/Fatal] 239 : void CMMUpdateMgr::m_LoadRecentlyList(IMMDoc*) [Line946] before m_LoadRecentlyList 10860
[MMDOC/Fatal] 240 : void CMMUpdateMgr::m_LoadRecentlyList(IMMDoc*) [Line975] after m_LoadRecentlyList 10868
[MMDOC/Fatal] 241 : m_RemoveAtList
[Browser/Fatal] 242 : [StopClustering:911] [CCMBrowserProxy] StopClustering Called
[Browser/Fatal] 243 : [StopSearching:933] [CCMBrowserProxy] StopClustering Called
[Browser/Fatal] 244 : [~CCMBrowserProxy:43] [CCMBrowserProxy] destructor is called m_nBrowserId = 1
[Browser/Fatal] 245 : [m_Destroy:1506] [CCMBrowser] m_Destroy() is called
[DeviceOrganizer/Fatal] 246 : [m_GetDeviceTypeByPartitionKey:1184] pDevice is NULL
[DeviceOrganizer/Fatal] 247 : [GetDeviceId:196] disconnected device id form DB
[DBHandler/Fatal] 248 : [Destroy:251] Start Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 249 : [Destroy:255] End Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 250 : [Destroy:251] Start Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 251 : [ReleaseCommandProcessorAndReceiver:120] Reference Count is 0. Delete receiver with key:/mtd_contents/-1|-1
[DBHandler/Fatal] 252 : [Destroy:714] Destroy CCMDBSQLiteReceiver m_bUseDB(1)
[DBHandler/Fatal] 253 : [m_CloseDB:873] SQLite DB is closed
[DBHandler/Fatal] 254 : [ReleaseCollateRuleGetter:304] Release Rule Getter..... Language: 20
[DBHandler/Fatal] 255 : [Destroy:255] End Destroy /mtd_contents/-1|-1 None
[DBHandler/Fatal] 256 : [~CCMDBCommandReceiver:44] ~CCMDBCommandReceiver Destructor
[DBHandler/Fatal] 257 : [~CCMDBCommandProcessor:46] ~CCMDBCommandProcessor Destructor
[Common/Fatal] 258 : [Destroy:139] #### Bookmark Manager is closed
[DeviceOrganizer/Fatal] 259 : [ReduceRefCount:152] ReduceRefCount is 1
[Browser/Fatal] 260 : [~CCMBrowser:50] ~CCMBrowser is destroyed: 0x8f31638!!!
[MMDOC/Fatal] 261 : void CMMDocFactory::DeinitDoc(CMMDoc*) [Line397] DeinitDoc, 1 reference
[MMDOC/Fatal] 262 : void CMMUpdateMgr::LoadRecentlyList() [Line940] after LoadRecentlyList 11380
[AP_INFOLINK/Fatal] 263 : Call START BG Mode!!!
m_fVFMode = 0
[AP_INFOLINK/Fatal] 264 : GetCurrentFC Return True
[AP_INFOLINK/Fatal] 265 : GetCurrentFC LineValue is = [0]
[AP_INFOLINK/Fatal] 266 : START BG Mode!!!
[PIXMAN] ARM SIMD Enabled...
[PIXMAN] ARM NEON Enabled...
[AP_INFOLINK/Fatal] 267 : CNNaviAppBase::CreateStartWidgetEngine()
[AP_INFOLINK/Fatal] 268 : CInfoLink2WrapperReal::dlopenWrapper()
[AP_INFOLINK/Fatal] 269 : filename is = [libWEClient.so]
[AP_INFOLINK/Fatal] 270 : END CInfoLink2WrapperReal::dlopenWrapper()
[AP_INFOLINK/Fatal] 271 : MIDDLE CNNaviAppBase::CreateStartWidgetEngine()
[AP_INFOLINK/Fatal] 272 : END CNNaviAppBase::CreateStartWidgetEngine()
[AP_INFOLINK/Fatal] 273 : END CNNaviAppBase::CreateStartWidgetEngine()[12812]
[m_SetLogLevel:47] Current Log Level - 1!
[m_SetDebugModule:76] Current Debug Module - 1, and Module ON - 0!
[m_SetDebugModule:76] Current Debug Module - 2, and Module ON - 0!
[m_SetDebugModule:76] Current Debug Module - 3, and Module ON - 0!
[RAStack_SSO/Debugging] 274 : RA Info Read (ret:0)
[RAStack_SSO/Debugging] 275 : Service Check "Remote Scheduler"=false
[RAStack_SSO/Debugging] 276 : Service Check "Remote HomeCare"=false
[RAStack_SSO/Debugging] 277 : Service Check "AllSharePlay"=false
[RAStack_SSO/Fatal] 278 : t_LoadLoginInfo:712 Load Complete
mkdir: can't create directory '/mtd_rwarea/dlna_web_root/': File exists
mkdir: can't create directory '/mtd_rwarea/dlna_web_root//SMPConfig': File exists
[PIXMAN] ARM SIMD Enabled...
[PIXMAN] ARM NEON Enabled...
rm: can't stat '/mtd_rwcommon/psa//*.*': Invalid argument
[01;33;42m[WebKit Engine Debug] [SDM_ReadKeyMapConfig:367] [0m[01;37;40mSDM_ReadKeyMapConfig() : /mtd_cmmlib/##### send signal from USER, SIG : 10, WidgetEngine(439)->exeDSP(67) sys_kill
InfoLink/lib/key ##### call default signal (10) handler
map.info[0m
[CSefPluginWrapper::CSefPluginWrapper(22)] Creator starts.
[CClientProxyEmp::CClientProxyEmp(60)] Creator starts. tid=1159037760
[CClientAppBase::CClientAppBase(29)] Creator starts. tid=1159037760
(WidgetEngine:439): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
WEBrowserConnector >> Client is connected!![m_GetLogLevel:32] Get Current Log Level - 1!
[m_SetLogLevel:47] Current Log Level - 1!
[m_SetDebugModule:76] Current Debug Module - 1, and Module ON - 0!
[m_SetDebugModule:76] Current Debug Module - 2, and Module ON - 0!
[m_SetDebugModule:76] Current Debug Module - 3, and Module ON - 0!
[AP_INFOLINK/Fatal] 279 : END CNNaviAppBase::CreateStartWidgetEngine()[12816]
[AP_INFOLINK/Fatal] 280 : END CNNaviAppBase::CreateStartWidgetEngine()[12822]
[AP_INFOLINK/Fatal] 281 : CInfoLink2WrapperReal::dlopenWrapper()
[AP_INFOLINK/Fatal] 282 : filename is = [libSefBroker.so]
[NET_MW/Fatal] 283 : [t_Main][line:479] NetworkDHCPMonitor Check cable [CONNECTED]
[NET_SS/Fatal] 284 : [DeactivateDHCP][line:822] ##########DeactivateDHCP [eth0] ##############
[AP_INFOLINK/Fatal] 285 : END CInfoLink2WrapperReal::dlopenWrapper()
[sef_BrokerStart][123] gbSefStartBroker:[0]
SEF - debug: lsmod
Tainted: P
mdrv_emac 12684 0 - Live 0xbf0f1000 (P)
samsung_mstar 494248 0 - Live 0xbf066000
samsung_mali 83468 8 samsung_mstar, Live 0xbf04c000
rfs_fat 202648 7 - Live 0xbf015000 (P)
rfs_glue 61548 1 rfs_fat, Live 0xbf000000 (P)
SEF - debug: ifconfig
eth0 Link encap:Ethernet HWaddr C4:73:1E:E6:30:57
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:30
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:201 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.[irq_proc_open][347] -16
0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1150 (1.1 KiB) TX bytes:1150 (1.1 KiB)
SEF - debug: ai_family[2] ai_socktype[1] ai_protocol[6]
SEF - sef_BrokerTestSocket OK
[CSEFDebug::Create(16)] Creator called.
[CSEFDebug::SetLogLevel(31)] level = 0
[AP_INFOLINK/Fatal] 286 : CInfoLink2WrapperReal::SetSEFLogLevel()
[AP_INFOLINK/Fatal] 287 : CNNaviAppBase::SetSEFLogLevel() / 13436
[CSEFDebug::SetLogLevel(31)] level = 0
[CSEFDebug::SetDebugModule(46)] Log module = 0, onOff = 0
[AP_INFOLINK/Fatal] 288 : CInfoLink2WrapperReal::SetSEFDebugModule()
[AP_INFOLINK/Fatal] 289 : CNNaviAppBase::SetSEFDebugModule() / 13452
[CSEFDebug::SetDebugModule(46)] Log module = 0, onOff = 0
[CSEFDebug::SetDebugModule(46)] Log module = 1, onOff = 0
[AP_INFOLINK/Fatal] 290 : CInfoLink2WrapperReal::SetSEFDebugModule()
[AP_INFOLINK/Fatal] 291 : CNNaviAppBase::SetSEFDebugModule() / 13452
[CSEFDebug::SetDebugModule(46)] Log module = 1, onOff = 0
[CSEFDebug::SetDebugModule(46)] Log module = 2, onOff = 0
[AP_INFOLINK/Fatal] 292 : CInfoLink2WrapperReal::SetSEFDebugModule()
[AP_INFOLINK/Fatal] 293 : CNNaviAppBase::SetSEFDebugModule() / 13452
[CSEFDebug::SetDebugModule(46)] Log module = 2, onOff = 0
[CHASDebug::Create(13)] Creator called.
[CHASDebug::SetLogLevel(27)] level = 0
[CHASDebug::SetDebugModule(42)] Log module = 0, onOff = 0
[CHASDebug::SetDebugModule(42)] Log module = 1, onOff = 0
[CHASDebug::SetDebugModule(42)] Log module = 2, onOff = 0
Thrift: TThreadedServer client died: No more data to read.
SDAL - 03.49.00.00
MIU _gMIU_MapBase= 45159000
MIU _gPM_MapBase= 45be9000
pthread_mutex_init
CHIP_InitISR
MMAP: E_MMAP_512MB_256MB for Mali testification!!
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 2
ooo u8CacheMode = 0
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 1
ooo u8CacheMode = 0
ooo u8CacheMode = 2
ooo u8CacheMode = 1
ooo u8CacheMode = 1
[HAL_DSCMB_SetBank][83] Set bank 0x45159000
u32PhyBufAddr = 14b10100, u32PhyBufSize = 000cff00
u32VirBufAddr = 4a30d100, u32VirBufSize = 000cff00
Device or resource busy
[AP_INFOLINK/Fatal] 294 : Update is False
[AP_INFOLINK/Fatal] 295 : *****************************************************
[AP_INFOLINK/Fatal] 296 : **** Infomation for connecting with hub-site ****
[AP_INFOLINK/Fatal] 297 : *****************************************************
[AP_INFOLINK/Fatal] 298 : Server Type : Operating
[AP_INFOLINK/Fatal] 299 : TVID : P7CL6KHUMOANQ
[AP_INFOLINK/Fatal] 300 : Mac Address : c4731ee63057
[AP_INFOLINK/Fatal] 301 : Firmware : T-INFOLINK2012-1012
[AP_INFOLINK/Fatal] 302 : Country Code : CZ
[AP_INFOLINK/Fatal] 303 : Model Code :
[AP_INFOLINK/Fatal] 304 : *****************************************************
[AP_INFOLINK/Fatal] 305 : Update is True
[NET_SS/Fatal] 306 : [ActivateDHCP][line:776] udhcpc -i eth0 -T 2 -b&
udhcpc (v1.18.1-VD Linux VDLinux.1.2.1.x) started
Sending discover...
Sending select for 10.255.25.107...
Lease of 10.255.25.107 obtained, lease time 43200
deleting routers
route: SIOCDELRT: No such process
adding dns 10.255.25.1
DEVICE = eth0
DEVICE = eth0
DEVICE = eth0
DEVICE = eth0
DEVICE = eth
[WebServer/libWebConv] 00:00.000 WebConv Init[WebServer/libWebConv] 00:00.000 Custom Service Added /manual/[WebServer/libWebConv] 00:00.001 Custom:1 Public:0[WebServer/libWebConv] 00:00.004 SERVICE_CHANGE message is sent (ret:1)[WebServer/libWebConv] 00:00.004 Custom Service Added /app/Mutex Create Successful
Mutex Create Successful
[CIP_AUTHULD] checkTime thread(ajdust the Priority of authuld) created!
mkdir: can't create directory '/mtd_rwarea/dlna_web_root/': File exists
mkdir: can't create directory '/mtd_rwarea/dlna_web_root//SMPConfig': File exists
bool checkFilesState(const char*) XML files are good
Yungaru GetModelSting in TD
[AccessControlInfo:ACLAddDevNameFilterRule] b_include :0 , PATTERN SEC_HHP_ , reject_chars /
[SSL_library_init] Initializing...
Yungaru GetModelSting in TD
[AccessControlInfo:ACLAddDevNameFilterRule] b_include :0 , PATTERN SEC_HHP_ , reject_chars /
[MOIP_MAIN/Fatal] 307 : [02;31m[15.600064][0m moipappbase create start
mount: mounting none on /proc/bus/usb failed: No such file or directory
>>[ERR:TDsPrimeSystem.cpp] GetVersionStr():3892 Not Supported Version Type
[DEFAULT/Warning] 308 : Specified confliction type has already been set !!
[DevMgr/Fatal] 309 : [LoadUSBModules:514] ...
[DevMgr/Fatal] 310 : [t_OnEvent:421] DeviceManagerImpl::MESSAGE_IMPL_LOAD_USB_MODULES
[DevMgr/Fatal] 311 : [ExecuteCommand:654] COMMAND_IMPL_LOAD_USB_MODULES...(0)
[DevMgr/Fatal] 312 : [Get:43] DeadlockProber Success...
Start : /sbin/insmod /lib/modules/tntfs.ko
osl_wireless_initialization~!!
????????????????????????LLTD Service Start~!!????????????????????????
Yungaru GetModelSting in TD
[AccessControlInfo:tntfs mod ld
ACLAddDevNameFilterRule] b_include :0 , PATTERN SEC_HHP_ , reject_chars /
End : /sbin/insmod /lib/modules/tntfs.ko Elapsed Time:52msec
[LoadUSBModules:1209] Start...
usbcore mod ld
insmod usbcore...
ehci_hcd mod ld
insmod ehci_hcd...
insmod: can't open '/lib/modules/ohci-hcd.ko': No such file or directory
insmod ohci_hcd...
usb_storage mod ld
insmod usb_storage...
USB : Exit Load USB module... Elapsed Time:540msec.
usb_storage found...
ehci_hcd found...
usbcore found...
[DevMgr/Fatal] 313 : [InitiateAllDevices:738] All devices are initiated!!!
[DevMgr/Fatal] 314 : [ExecuteCommand:843] Case(9) Done... Elapsed Time:616msec.
[DevMgr/Fatal] 315 : [t_OnEvent:331] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0)
[DevMgr/Fatal] 316 : [t_OnEvent:232] DeviceManager::MESSAGE_USB_INSMOD_COMPLETE : (11)
[AP_NET_SETUP/Fatal] 317 : [virtual bool CNetworkAppBase::t_OnEvent(const PTEvent*)][line:1135] LoadWiredModule Done
[NET_SS/Fatal] 318 : [LoadWirelessModule][line:2903] NETWORK TYPE : NETWORK_SUPPORT_WIFI_EXT
[NET_SS/Fatal] 319 : [LoadWirelessModule][line:3006] ##### WIFI MODULE - TV CASE - ONLY RALINK #####
[NET_SS/Fatal] 320 : [LoadWirelessModule][line:3012] insmod rtutil5572sta.ko ...
rtutil5572sta mod ld
[NET_SS/Fatal] 321 : [LoadWirelessModule][line:3014] insmod rtutil5572sta.ko ... - Done !!
[NET_SS/Fatal] 322 : [LoadWirelessModule][line:3026] insmod rt5572sta.ko ...
rt5572sta mod ld
[NET_SS/Fatal] 323 : [LoadWirelessModule][line:3028] insmod rt5572sta.ko ... - Done !!
[NET_SS/Fatal] 324 : [LoadWirelessModule][line:3042] insmod rtnet5572sta.ko dongle_type=1 ...
