Console code for BD D series

[juusso]

We have code for ExLink console unlock + code for TDM.

Code: Select all

20102011
20089999

Any comments welcome.

[julianbb]

Yap tested ...working...

Code: Select all

[AP_INFOLINK/Fatal] 257 :  Country Code : GB
[AP_INFOLINK/Fatal] 258 :  Model Code : FIRENZE_BD_DVB
[AP_INFOLINK/Fatal] 259 : ****************************************************
[AP_INFOLINK/Fatal] 260 : Update is False

20089999

====================================
      [ TOP Debug Menu]
------------------------------------
  1  : SubSystem Print On/Off
  2  : Platform Print Setting
  3  : TD Print Setting
  4  : Performance Print Setting
  5  : Sdal Print Setting
  6  : Sdal Trace Setting
  10 : Factory Debug
  11 : TD Debug
  12 : SubSystem DBG
  13 : SubSystem Info Print
  14 : Optical SubSystem   DBG
  21 : Louvre Print Setting
------------------------------------
  70 : Jade Debug
  80 : PVR Debug
====================================
  99 : Exit
====================================
DBG> :

Samsung don't have imagination 20102011 ? or maybe they should use a keyboard with more numbers ...maybe a full qwerty one...

[nobody]

Lol! They can't since they locked the serial port to 0-9 A-F cr and del

[julianbb]

To input numbers you should dismount your device , find serial port connections on the electronic board ,solder TxD, Rxd and Gnd wires to a serial cable connect them to a Pc and open port via Putty or Telnet...
Thats it

[oga83]

Additional console codes...
probably useless

Code: Select all

8158282
====================================
      [ Key Debug Menu]
====================================
  1  : Channel Up/Down Test
  2  : Source Change Test
  3  : Previous Key Test
  4  : Channel Up Test
  5  : Air/Cable Change Channel Up Test
  6  : Channel Up STC Test
  7  : Memory Leak Check
  8  : AFT Read Aging Test
  9  : Play Key Scenario
====================================
  90(or AnyKey) : Test Stop
  99 : Exit
====================================

Code: Select all

81588
@@@@@@@@@@@ Key Record Start @@@@@@@@@@@
81599
@@@@@@@@@@@ Key Record Exit @@@@@@@@@@@

Code: Select all

81501
Play Key Scenario !!!

Code: Select all

81590
Stop the Key Scenario

Code: Select all

1194444
Check POWER_TYPE_CPU_RESET on barcelona project

[strugler]

can you guys explain to me what are thoses codes for ? i have an HT D6750w will those codes work for me ?

Thank you, i am a newb after all

[oga83]

There is a serial port on most units
It is possible to connect it to a terminal (putty, hyperterminal, ...)
Then :
- 20102011 is used to enable the keyboard entry
- 2008999 is used to run the Top Debug Menu

[bdublues]

Nice work! Glad people are still tinkering with these.
If only this had region options, and was for BD F series :/

[r00t00r]

is there a chance for these commands to be altered with a fw update