SamyGo virtual drive MOD
Re: SamyGo virtual drive MOD
hi pohybel!
i've tried with the new g_file_storage.ko on my UE40D8000 without success
the output:
@ init.d $ ./02_04_vusb.init start
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/dummy_hcd.ko': File exists
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': invalid module format
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
mkdir: cannot create directory '/dtv/usb/samygovirt': File exists
if i try just insmod the module from cli:
$ insmod /mtd_rwcommon/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko file="/dtv/vusb1,/dtv/vusb2,/dtv/vusb3" model="Movies,Laptop"
insmod: can't insert '/mtd_rwcommon/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': invalid module format
i think the parameters are right, i copy/paste from the first post
have u any idea, how can solve this problem?
thnx!
i've tried with the new g_file_storage.ko on my UE40D8000 without success
the output:
@ init.d $ ./02_04_vusb.init start
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/dummy_hcd.ko': File exists
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': invalid module format
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
mkdir: cannot create directory '/dtv/usb/samygovirt': File exists
if i try just insmod the module from cli:
$ insmod /mtd_rwcommon/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko file="/dtv/vusb1,/dtv/vusb2,/dtv/vusb3" model="Movies,Laptop"
insmod: can't insert '/mtd_rwcommon/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': invalid module format
i think the parameters are right, i copy/paste from the first post
have u any idea, how can solve this problem?
thnx!
Re: SamyGo virtual drive MOD
I was afraid of it. Are you sure that your TV has ARM processor? Or maybe MSTAR?
juuso, are you there? We need your help.
Obviously it means that file is not compiled for your TV. The reason could be processor at all (MSTAR instead of ARM) or different toolchain which I should use to build this module for your tv. Unfortunatelly I can't find such toolchain on Samsung site.insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': invalid module format
juuso, are you there? We need your help.
Re: SamyGo virtual drive MOD
Ok, try to execute this command on ORYGINAL samygo g_file_storage.ko and post your results:
It should show architecture of your processor.
Code: Select all
file ./g_file_storage.ko
Re: SamyGo virtual drive MOD
rope@nc6320:~/samy$ file ./g_file_storage.ko
./g_file_storage.ko: ELF 32-bit LSB relocatable, ARM, version 1 (SYSV), BuildID[sha1]=0x833de0d48be7171abb67fb8d69cbff17ffb66d2a, not stripped
and
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 798.72
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc08
CPU revision : 2
Hardware : Samsung SDP1002 Evaluation board
Revision : 0000
Serial : 0000000000000000
thnx for your support
./g_file_storage.ko: ELF 32-bit LSB relocatable, ARM, version 1 (SYSV), BuildID[sha1]=0x833de0d48be7171abb67fb8d69cbff17ffb66d2a, not stripped
and
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 798.72
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc08
CPU revision : 2
Hardware : Samsung SDP1002 Evaluation board
Revision : 0000
Serial : 0000000000000000
thnx for your support
Re: SamyGo virtual drive MOD
Looks good. However mine is a little bit different. I mean CPU revision:
I've just found another toolchain for ARM on Samsung site and currently I'm downloading it. I will try to recompile it today.
Code: Select all
Processor : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1196.03
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 1
Hardware : Samsung SDP1001 Evaluation board
Revision : 0000
Serial : 0000000000000000
Last edited by pohybel on Fri Feb 22, 2013 10:55 pm, edited 1 time in total.
Re: SamyGo virtual drive MOD
OK rope, last chance. I've build module with new toolchain and it looks promissing. Check module from attachment.
You do not have the required permissions to view the files attached to this post.
Re: SamyGo virtual drive MOD
hi, am I to late?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: SamyGo virtual drive MOD
it's not working
@ init.d $ ./02_04_vusb.init start
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/dummy_hcd.ko': File exists
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': invalid module format
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
mkdir: cannot create directory '/dtv/usb/samygovirt': File exists
and manual insmod:
init.d $ insmod /mtd_rwcommon/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko file="/dtv/vusb1,/dtv/vusb2,/dtv/vusb3" model="Movies,Laptop"
insmod: can't insert '/mtd_rwcommon/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': invalid module format
juuso: too late? for what?
@ init.d $ ./02_04_vusb.init start
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
mkfs.vfat 2.11 (12 Mar 2005)
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/dummy_hcd.ko': File exists
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': invalid module format
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
real storage device at: /sys/block/sda/device/model
mkdir: cannot create directory '/dtv/usb/samygovirt': File exists
and manual insmod:
init.d $ insmod /mtd_rwcommon/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko file="/dtv/vusb1,/dtv/vusb2,/dtv/vusb3" model="Movies,Laptop"
insmod: can't insert '/mtd_rwcommon/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': invalid module format
juuso: too late? for what?
Re: SamyGo virtual drive MOD
juuso, what could be the problem? I have used two different toolchains for ARM and it still not working. I have used:
- VDLinux-armv7a8-toolchain-lite_20100630
- VDLinux-ARMv7-4.4-202-toolchain-v2r2-20110630
- and 11_UNxxD7xx0.zip sources which is for UE40D8000 according to http://opensource.samsung.com/reception ... cation1=tv
Is there another toolchain? Should I add some magic option while executing "make" to build module for this TV?
- VDLinux-armv7a8-toolchain-lite_20100630
- VDLinux-ARMv7-4.4-202-toolchain-v2r2-20110630
- and 11_UNxxD7xx0.zip sources which is for UE40D8000 according to http://opensource.samsung.com/reception ... cation1=tv
Is there another toolchain? Should I add some magic option while executing "make" to build module for this TV?
Re: SamyGo virtual drive MOD
rope, could you please attach your oryginal g_file_storage.ko. I want to take a look on it