[Ended] E series widget -autostart w/o USB
Re: [Testing] Update2: E series widget -autostart w/o USB
Remove widget from smarthub or delete it trough ftp (/mtd_rwcommon/widgets/user/SamyGO). That`s all.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: [Testing] Update2: E series widget -autostart w/o USB
hi juuso,
thanks for the hint with 03_03_djmount.init.
I'll give it a try.
You say, that samba client ist enabled by default.
Hmmm, my samba shares do not appear.
This is the part of the samba.conf of my dreambox:
[dm800]
comment = My Share
path = /mnt/hdd/movie
read only = yes
public = yes
guest ok = yes
But again, in my case it is not necessary.
Thank you for your great work.
thanks for the hint with 03_03_djmount.init.
I'll give it a try.
You say, that samba client ist enabled by default.
Hmmm, my samba shares do not appear.
This is the part of the samba.conf of my dreambox:
[dm800]
comment = My Share
path = /mnt/hdd/movie
read only = yes
public = yes
guest ok = yes
But again, in my case it is not necessary.
Thank you for your great work.
Re: [Testing] Update2: E series widget -autostart w/o USB
To get samba shares working, you need to have file /mtd_rwarea/smb_userdata. if file don`t exists, script exits.
Place this file trough ftp...
p.s. here is no special wiki page for E series, but you can inform you self on D series wiki or here - Components, Design and Structure.
Principles are same, may differ from series to series because of limitations and restrictions made by samsung.
p.p.s all enabled scripts are with ending .init and all disabled scripts are with ending .dis
Code: Select all
USER="your username"
PASSWD="your password"
p.s. here is no special wiki page for E series, but you can inform you self on D series wiki or here - Components, Design and Structure.
Principles are same, may differ from series to series because of limitations and restrictions made by samsung.
p.p.s all enabled scripts are with ending .init and all disabled scripts are with ending .dis
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: [Testing] Update2: E series widget -autostart w/o USB
Hi.
I have tested on UE40ES5505 T-MST10PDEUC-1032.0. and its works.
but after restart root access being disabled.
EDIT: Rootaccess works. but i cant get sambashare works...
//Jimmy
I have tested on UE40ES5505 T-MST10PDEUC-1032.0. and its works.
but after restart root access being disabled.
EDIT: Rootaccess works. but i cant get sambashare works...
//Jimmy
Last edited by zeddan81 on Thu Apr 18, 2013 1:20 am, edited 1 time in total.
Re: [Testing] Update2: E series widget -autostart w/o USB
juuso wrote: riodoro
Please disable trough ftp 03_03_djmount.init (rename to 03_03_djmount.init.dis) - this is upnp client and not needed if you use samba or nfs.
samba client is enabled by default as NFS client as well. And moreover, samba-server is enabled on TV too.miazza wrote:at the end I cannot understand why the SMB is not enabled by default in Samygo...miazza
Hi juuso!
I will disable 03_03_djmount.init (rename 03_03_djmount.init via ftp), but if i have 2 or more NAS (i have plant to buy 2 NAS) the Samygo usb virtual will auto found these NAS or i much config IP SERVER SAMBA?
Thanks you Expansion, i need it very much!
UA40Eh5300 modi to UE46Eh5300 with DVB-TC
UA32EH4003 try to using DVB-C
UA32EH4003 try to using DVB-C
Re: [Testing] Update2: E series widget -autostart w/o USB
Well done Riodoro.
I managed to get ftp access to my tv and found the file you specified. I found the spot and edited it to be the same as yours (changed to my environment).
Still, my Dreambox shares don't show up.
I've tried reading all the relative posts I can find and following the instructions but still no luck.
I have Skype installed, but the /mtd_rwcommon/moip/engines/Skype/ directory didn't exist. I created it, and placed the 2 downloaded files into it. That has now made the SamyGO widget auto start now.
I have disabled Watchdog and set the RS232 to debug.
I created the file /mtd_rwarea/smb_userdata.
The virtual drive is in my sources list, but there are no files found.
I am going to leave it on that page for a while and see if it populates.
Is there anything I have missed?
Cheers.
I managed to get ftp access to my tv and found the file you specified. I found the spot and edited it to be the same as yours (changed to my environment).
Still, my Dreambox shares don't show up.
I've tried reading all the relative posts I can find and following the instructions but still no luck.
I have Skype installed, but the /mtd_rwcommon/moip/engines/Skype/ directory didn't exist. I created it, and placed the 2 downloaded files into it. That has now made the SamyGO widget auto start now.
I have disabled Watchdog and set the RS232 to debug.
I created the file /mtd_rwarea/smb_userdata.
The virtual drive is in my sources list, but there are no files found.
I am going to leave it on that page for a while and see if it populates.
Is there anything I have missed?
Cheers.
Last edited by Hoffy on Wed Apr 17, 2013 12:56 pm, edited 1 time in total.
Re: [Testing] Update2: E series widget -autostart w/o USB
Is it possible to manually enumerate several fixed servers in 04_04_samba.init, instead of only one? (automatic search doesn't always work)
edit: ok, I didn't find how to separate IPs so I modified the code to execute getshares() as many times as i needed with different $SERVERS values
edit: ok, I didn't find how to separate IPs so I modified the code to execute getshares() as many times as i needed with different $SERVERS values
I do NOT receive any PM. Please use forum.
Re: [Testing] Update2: E series widget -autostart w/o USB
Could you please share script with us? Maybe in separate thread (if many changes) or so?zoelechat wrote:Is it possible to manually enumerate several fixed servers in 04_04_samba.init, instead of only one? (automatic search doesn't always work)
edit: ok, I didn't find how to separate IPs so I modified the code to execute getshares() as many times as i needed with different $SERVERS values
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: [Testing] Update2: E series widget -autostart w/o USB
When you get Samba share to work, which can be very VERY difficult, you have to edit 04_04_samba.init script. Here is an example for 3 different fixed servers:juuso wrote:Could you please share script with us? Maybe in separate thread (if many changes) or so?
At the beginning of the script, declare 2 more servers, eg.
Code: Select all
SERVER="192.168.0.10"
SERVER2="192.168.0.11"
SERVER3="192.168.0.12"
Code: Select all
get_servers
get_shares
Code: Select all
# get_servers
SERVERS=$SERVER
get_shares
SERVERS=$SERVER2
get_shares
SERVERS=$SERVER3 #repeat these 2 lines how many times you want
get_shares #server4, server5....
I do NOT receive any PM. Please use forum.