Checked on IDA, everything seems to be ok and u-boot promt is enabled.
Code: Select all
is get uart char
if ( v4 == '~' )
{
v5 = 1;
}
else
{
sub_67002020(150);
v30090D78 |= 1u;
if ( v3 & 2 )
{
sub_67015D94("\n2nd Partition !!!!!!!!!!!!!!!!!\r\n");
sub_67002674(devil);
v5 = 6;
}
else
{
sub_67015D94("\n1st Partition !!!!!!!!!!!!!!!!!\r\n");
sub_67002674(4);
v5 = 4;
}
}
sub_670025C0(v5);
Login should be same as on B series - keep holding tilde key (~) and power on TV until you get invitation.
Download from Samsung`s servers T-GAP8DEUC-1028.0.
Standalone u-boot.bin and onboot.bin from this firmware upgrade attached. For research only! Don`t flash it manually, potential brick!
Update also available for D7xxx series. Grab here: T-GAPDEUC-1028.0
Can anyone with D8xxx or D7xxx check it? All what is needed - do firmware upgrade from USB and check with ExLink cable. Thanks!