Me and my UE46B6000VPXZG Samsug

Here for general support for B series TVs, request and problem solve area.

User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: T-CHL5CIPDEUC 2008

Post by juusso »

got dumps. What do you expect i have to do?

ps, what is the output of

Code: Select all

cat /proc/partitions
cat /proc/cmdline
p.p.s here is the link to original 2007.0 http://dfiles.ru/files/rwj573tp5
If everything works, dont upgrade.

Do you have wlan if you switch to B7000? Have you tried to use compatible wifi dongle for this goal?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
candelaver
Posts: 22
Joined: Fri Sep 12, 2014 11:56 am

Re: Me and my UE46B6000VPXZG Samsug

Post by candelaver »

I thought you needed the Dumps for upgrading the Samygo tools like Patcher and so on ??
i?m on businestravel untill Thrusday, so i?m didnthome for further Work.
candelaver
Posts: 22
Joined: Fri Sep 12, 2014 11:56 am

Re: Me and my UE46B6000VPXZG Samsug

Post by candelaver »

i ordered a compatible Dongle from the Wiki List of Dlink.
didn?t try it at all, at time
candelaver
Posts: 22
Joined: Fri Sep 12, 2014 11:56 am

Re: Me and my UE46B6000VPXZG Samsug

Post by candelaver »

I read about the getmkey and son on in the hashes wiki, so i must have Linux with toolchain for getting mkey with precompiled scripts, also i whouldnt get the mkey and so on, when i execute the scrpits from /mtd_rwarea ??

did i understand this right ??
candelaver
Posts: 22
Joined: Fri Sep 12, 2014 11:56 am

Re: Me and my UE46B6000VPXZG Samsug

Post by candelaver »

@juuso
With a little Help of my Brother, i got Remote Access to home, and my Brother entered the TDM Menu for me,

At First you wanted to know this
# cat /proc/partitions
major minor #blocks name

139 0 127744 tbmlc
139 1 128 tbml1
139 2 512 tbml2
139 3 128 tbml3
139 4 128 tbml4
139 5 3072 tbml5
139 6 4096 tbml6
139 7 2048 tbml7
139 8 17280 tbml8
139 9 20480 tbml9
139 10 17280 tbml10
139 11 20480 tbml11
139 12 13312 tbml12
139 13 28416 tbml13
139 14 128 tbml14
139 15 128 tbml15
139 16 128 tbml16
137 0 127744 bml0/c
137 1 128 bml1
137 2 512 bml2
137 3 128 bml3
137 4 128 bml4
137 5 3072 bml5
137 6 4096 bml6
137 7 2048 bml7
137 8 17280 bml8
137 9 20480 bml9
137 10 17280 bml10
137 11 20480 bml11
137 12 13312 bml12
137 13 28416 bml13
137 14 128 bml14
137 15 128 bml15
137 16 128 bml16
138 8 16758 stl8
138 9 19908 stl9
138 12 12852 stl12
138 13 27720 stl13
8 0 15482880 sda
8 1 15481856 sda1
# cat /proc/cmdline
root=139:6 rw console=ttyS1 quiet
also i copied the getmkey and chkhash to /mtd_rwarea and execute getmkey
Got Error on this
# cd /mtd_rwarea
# ./getmkey
opening /dev/mem ok!
No key was supplied from a command line.
Using mackey from /dev/tfsr11
Error in opening tfsr11! Errno=0x2


i changed folder to /dev and listed it
there is no Folder named /dev/tfsr11
# cd /dev/
# ls
bml0 sdb15 sde14 sdh13 sdk12 sdn11 sdp_i2c2
bt_usb sdb2 sde15 sdh14 sdk13 sdn12 sdp_i2c3
console sdb3 sde2 sdh15 sdk14 sdn13 sdp_i2c4
full sdb4 sde3 sdh2 sdk15 sdn14 sdp_i2c5
kmem sdb5 sde4 sdh3 sdk2 sdn15 stl0
kmsg sdb6 sde5 sdh4 sdk3 sdn2 tbml1
mem sdb7 sde6 sdh5 sdk4 sdn3 tbml10
mice sdb8 sde7 sdh6 sdk5 sdn4 tbml11
null sdb9 sde8 sdh7 sdk6 sdn5 tbml12
port sdc sde9 sdh8 sdk7 sdn6 tbml13
ptmx sdc1 sdf sdh9 sdk8 sdn7 tbml14
pts sdc10 sdf1 sdi sdk9 sdn8 tbml15
ram0 sdc11 sdf10 sdi1 sdl sdn9 tbml16
ram1 sdc12 sdf11 sdi10 sdl1 sdo tbml17
ram2 sdc13 sdf12 sdi11 sdl10 sdo1 tbml18
ram3 sdc14 sdf13 sdi12 sdl11 sdo10 tbml19
ram4 sdc15 sdf14 sdi13 sdl12 sdo11 tbml2
ram5 sdc2 sdf15 sdi14 sdl13 sdo12 tbml20
ram6 sdc3 sdf2 sdi15 sdl14 sdo13 tbml3
ram7 sdc4 sdf3 sdi2 sdl15 sdo14 tbml4
ram8 sdc5 sdf4 sdi3 sdl2 sdo15 tbml5
ram9 sdc6 sdf5 sdi4 sdl3 sdo2 tbml6
random sdc7 sdf6 sdi5 sdl4 sdo3 tbml7
sam sdc8 sdf7 sdi6 sdl5 sdo4 tbml8
sda sdc9 sdf8 sdi7 sdl6 sdo5 tbml9
sda1 sdd sdf9 sdi8 sdl7 sdo6 tbmlc
sda10 sdd1 sdg sdi9 sdl8 sdo7 tts
sda11 sdd10 sdg1 sdj sdl9 sdo8 ttyS0
sda12 sdd11 sdg10 sdj1 sdm sdo9 ttyS1
sda13 sdd12 sdg11 sdj10 sdm1 sdp ttyS2
sda14 sdd13 sdg12 sdj11 sdm10 sdp1 ttySD0
sda15 sdd14 sdg13 sdj12 sdm11 sdp10 ttySD1
sda2 sdd15 sdg14 sdj13 sdm12 sdp11 ttySD2
sda3 sdd2 sdg15 sdj14 sdm13 sdp12 urandom
sda4 sdd3 sdg2 sdj15 sdm14 sdp13 usbdev1.1
sda5 sdd4 sdg3 sdj2 sdm15 sdp14 usbdev2.1
sda6 sdd5 sdg4 sdj3 sdm2 sdp15 usbdev3.1
sda7 sdd6 sdg5 sdj4 sdm3 sdp2 usbdev4.1
sda8 sdd7 sdg6 sdj5 sdm4 sdp3 vcs
sda9 sdd8 sdg7 sdj6 sdm5 sdp4 vcsa
sdb sdd9 sdg8 sdj7 sdm6 sdp5 zero
sdb1 sde sdg9 sdj8 sdm7 sdp6
sdb10 sde1 sdh sdj9 sdm8 sdp7
sdb11 sde10 sdh1 sdk sdm9 sdp8
sdb12 sde11 sdh10 sdk1 sdn sdp9
sdb13 sde12 sdh11 sdk10 sdn1 sdp_i2c0
sdb14 sde13 sdh12 sdk11 sdn10 sdp_i2c1

can`t see, i mean where and why this error came from, i looked also in the Source Script from Getmkey
printf("opening /dev/mem ok!\n");
pCipherbase = mmap(NULL, CRYPTO_MAP_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd1, CRYPTO_UNIT_BASE_PA);
pMemBase = mmap(NULL, MEM_BASE_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, MEM_BASE_256MB_PA);
if ((pCipherbase == MAP_FAILED) || (pMemBase == MAP_FAILED)) {
printf("Error in doing mmap()! pCipherbase=0x%08X pMembase=0x%08X Errno=0x%X\n",
(int)pCipherbase, (int)pMemBase, errno);
close(fd1);
close(fd2);
return 2;
Hm dont see it
candelaver
Posts: 22
Joined: Fri Sep 12, 2014 11:56 am

Re: Me and my UE46B6000VPXZG Samsug

Post by candelaver »

@juuso,
have you any hint for me, about the getmkey script??
i`m preparing at time a new linux System at home for further work.

thx
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Me and my UE46B6000VPXZG Samsug

Post by juusso »

1. I can`t compile new network enabled kernel for you - it`s out of my knowledge. This means i don`t know how else add the "network" feature to your TV.
2. It is possible to make some customization on your rootfs (e.g. autostart of some scripts like samygo.sh) and flash it back (together with correct hashes in macpart). The goal could be autostart of some (few) features.
3. I see you`re really beginner here. You have to read everything related to authuld on B series, hash calculations etc etc, linux commands, bash and so on to improove your understanding - one wrong command or one wrong letter in hash calculations can bring to brick.
4. I`m not sure if i can help you remotely, i just can help with some advices.
5. Forget getmkey, you don`t need it ATM.

What else... depends how do you understand the situation. Your TV is limited. Any SDL enabled "games" won`t work. Just some.

p.s. i did hash calculations, everything is correct (as expected). I have some ideas how to patch kernel and where to patch to have: shell unlocked, authuld disabled, but my knowledge may be wrong and never checked on your series TV. If lucky - it works, if not lucky - it bricks. I`m not very enjoy to brick one more TV...
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
candelaver
Posts: 22
Joined: Fri Sep 12, 2014 11:56 am

Re: Me and my UE46B6000VPXZG Samsug

Post by candelaver »

I could ask someone of my Friends, for help and advice to/howto compile Kernel.
he adviced me a lot in RSA things :-) that wouldnt any Problem for me.

i read a lot in the wiki of samygo an i understand fully howto calculate hashes etc.
i extracted also the dumpfiles an could see the folderstructure and Wlan driver, telnet etc. in side.

i tried to execute Getmkey from mdt_rwarea but error.
so i stopped/stucked here, before i do something wrong and kill the beast .-)

in the Meantime, i read some books for using Linux, everythig will be clear.
candelaver
Posts: 22
Joined: Fri Sep 12, 2014 11:56 am

Re: Me and my UE46B6000VPXZG Samsug

Post by candelaver »

I whould like to enable Network WLAN, may other Wlan Dongle, the ARF fix, thats whould be enough for me.
also it whould be interessting, the samygo.sh or autostart.

that whould be more then expected.

yes i need my keys for calulating, also for compiling kernel to create alls hashes etc. in the new kernel.
i do it step for step, so i`ll wil do a kernel compile, just for learning.
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Me and my UE46B6000VPXZG Samsug

Post by juusso »

your current hashes are:

Code: Select all

LS-GL:/TV/_B/CI+/candelaver/dmp# ./chkhash -k 7CED26D8CA2FA0F80BC637E2FF07EC46 -L 0x1000 8 bml3.dmp *
hash[ 0] = ce63ba14d4b8fad5655e71e35f6f6662   length =  2308560  :  bml5.dmp
hash[ 1] = 76f07d82946de132af94e91acfad85bb   length =   157868  :  bml2.dmp
hash[ 2] = e145a73c99e8c6ea8e1092a1206fea40   length =    87600  :  bml4.dmp
hash[ 4] = 2d7d5dd0afe2c28d90b375357234954e   length =  3387392  :  bml6.dmp
hash[ 5] = 5883d6e84adf272808f830dff43b2a00   length =   786432  :  bml7.dmp

LS-GL:/TV/_B/CI+/candelaver/dmp# ./chkhash -k 7CED26D8CA2FA0F80BC637E2FF07EC46 -L 0x0 8 bml14.dmp *
hash[ 0] = 0c26f6d7fe404ae16c811f0f85c158e5   length = 13676544  :  stl10.dmp
hash[ 0] = 0c26f6d7fe404ae16c811f0f85c158e5   length = 13676544  :  stl8.dmp
hash[ 1] = ae351344dbdc27dc9d7001722b9dc309   length = 16531456  :  stl11.dmp
hash[ 1] = ae351344dbdc27dc9d7001722b9dc309   length = 16531456  :  stl9.dmp

LS-GL:/TV/_B/CI+/candelaver/dmp# ./chkhash -k 7CED26D8CA2FA0F80BC637E2FF07EC46 -L 0x0 8 bml15.dmp *
hash[ 0] = 0c26f6d7fe404ae16c811f0f85c158e5   length = 13676544  :  stl10.dmp
hash[ 0] = 0c26f6d7fe404ae16c811f0f85c158e5   length = 13676544  :  stl8.dmp
hash[ 1] = ae351344dbdc27dc9d7001722b9dc309   length = 16531456  :  stl11.dmp
hash[ 1] = ae351344dbdc27dc9d7001722b9dc309   length = 16531456  :  stl9.dmp
ANd your hashes are stored in:
hashpart1 = bml14
hashpart2 = bml15
magicpart = bml16
You don`t need magic key for hash calculations or for kernel compilation. But you need the mkey, which is common for whole B series:

Code: Select all

7CED26D8CA2FA0F80BC637E2FF07EC46
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Post Reply

Return to “[B] Support”