23Lordbyte wrote:@Jeopardy,
Could you try a manual Putty session in telnet-mode on port 23 ...
I did change some Netcat-stuff to pure telnet-stuff ..
[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
You do not have the required permissions to view the files attached to this post.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
Maybe try to set Telnet port to 2023 in PVRdecoder settings
I do NOT receive any PM. Please use forum.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
port 2023 problem.zoelechat wrote:Maybe try to set Telnet port to 2023 in PVRdecoder settings
23 good then.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
Uhmm, you show two screenshots, concerning two different IP?sJopardy wrote:port 2023 problem.
23 good then.
xx.xx.xx.100 and xx.xx.xx.103
Does that work for you ?
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
100 my tv's IPLordbyte wrote:Uhmm, you show two screenshots, concerning two different IP?sJopardy wrote:port 2023 problem.
23 good then.
xx.xx.xx.100 and xx.xx.xx.103
Does that work for you ?
103 (on modem rooter) my PC IP
this modem property same. never change
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
I sang victory too soon!tendi wrote:Fantastic, it works smoothly!
Now the download of the recordings doesn't finish anymore, I get this kind of message
Code: Select all
Retrieved 581,73 Mb of 581,73 Mb ..
File successfully retrieved.
Operation finished .. Waiting for user..
All recordings on USB listed. Waiting for user.
Operation finished .. Waiting for user..
This thing happens with all the recordings, either on windows and on mac (with wine), over cable lan and over wifi.
Tv model: UE40H6400
Firmware: T-MST14DEUC-2117.5
Firmware: T-MST14DEUC-2117.5
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
I feared something like that could happen.
The case is this :
The Decoder tells the TV to decode the file we want to download.
The TV (hopefully) start to decode the recording. The TV will produce a log that decoding is in progress.
The PVRDecoder monitors this log, looking for a special line that indicates that decoded file has been created and is being written.
At this point the PVRDecoder starts its download under the ASSUMPTION that the decoder-progress on TV is faster than the download.
If it was to happen that download was faster than decoder FTP-server in TV would reach end-of-file too "soon".
sectroyer who programmed the decoder running on your TV promissed it wouldent happen .. ever !
How fast (slow) is your TV-model ?
I may have to put a switch to serialize, or some parameter were delay can be set ..
Need more feedback .. any !
The case is this :
The Decoder tells the TV to decode the file we want to download.
The TV (hopefully) start to decode the recording. The TV will produce a log that decoding is in progress.
The PVRDecoder monitors this log, looking for a special line that indicates that decoded file has been created and is being written.
At this point the PVRDecoder starts its download under the ASSUMPTION that the decoder-progress on TV is faster than the download.
If it was to happen that download was faster than decoder FTP-server in TV would reach end-of-file too "soon".
sectroyer who programmed the decoder running on your TV promissed it wouldent happen .. ever !
How fast (slow) is your TV-model ?
I may have to put a switch to serialize, or some parameter were delay can be set ..
Need more feedback .. any !
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
Infact I thought that it could be due to the speed of the connection... A few minutes ago I tried once again and this time I succeeded to download that same file over wifi. Then I connected to the lan in order to download the next file with a better speed and - surprise - that happened again. After only 37 MB of 1,15 GB the download stopped. The average transfer speed was 75 MB/s - 113 MB/s.
Tv model: UE40H6400
Firmware: T-MST14DEUC-2117.5
Firmware: T-MST14DEUC-2117.5
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
So, do I have a LAN-problem, or is your TV-model low end (no offence) ?tendi wrote:Infact I thought that it could be due to the speed of the connection... A few minutes ago a tried once again and this time I succeeded to download that same file over wifi. Then I connected to the lan in order to download the next file with a better speed and - surprise - that happened again. After only 37 MB of 1,15 GB the download stopped. The average transfer speed was 75 MB/s - 113 MB/s.
I need either others reporting issue, or accept that a very few TV?s are not fast enough to
support the decoder-faster-than-download pragma .. or should I add a serializing-switch perhaps .. hmmmmm
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
It may be, I don't know. But consider that it's still a quad core model made in 2014...Lordbyte wrote:So, do I have a LAN-problem, or is your TV-model low end (no offence) ?
Anyway, now I'm downloading over wifi at the average speed of 16 MB/s and it's working.
Tv model: UE40H6400
Firmware: T-MST14DEUC-2117.5
Firmware: T-MST14DEUC-2117.5