[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

Jopardy
SamyGO Project Donor
Posts: 49
Joined: Sat Feb 01, 2014 4:54 pm
Location: Turkiye

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Jopardy » Sat Jan 03, 2015 12:50 pm

Lordbyte wrote:@Jeopardy,

Could you try a manual Putty session in telnet-mode on port 23 ...
I did change some Netcat-stuff to pure telnet-stuff .. :(
23
?simsiz 1.jpg
?simsiz 2 (Kopyala).jpg
You do not have the required permissions to view the files attached to this post.

zoelechat
Official SamyGO Developer
Posts: 8372
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by zoelechat » Sat Jan 03, 2015 1:01 pm

Maybe try to set Telnet port to 2023 in PVRdecoder settings
I do NOT receive any PM. Please use forum.

Jopardy
SamyGO Project Donor
Posts: 49
Joined: Sat Feb 01, 2014 4:54 pm
Location: Turkiye

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Jopardy » Sat Jan 03, 2015 1:06 pm

zoelechat wrote:Maybe try to set Telnet port to 2023 in PVRdecoder settings
port 2023 problem.

23 good then. :oops:

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Lordbyte » Sat Jan 03, 2015 1:30 pm

Jopardy wrote:port 2023 problem.

23 good then. :oops:
Uhmm, you show two screenshots, concerning two different IP?s

xx.xx.xx.100 and xx.xx.xx.103

Does that work for you ? :-)
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

Jopardy
SamyGO Project Donor
Posts: 49
Joined: Sat Feb 01, 2014 4:54 pm
Location: Turkiye

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Jopardy » Sat Jan 03, 2015 1:35 pm

Lordbyte wrote:
Jopardy wrote:port 2023 problem.

23 good then. :oops:
Uhmm, you show two screenshots, concerning two different IP?s

xx.xx.xx.100 and xx.xx.xx.103

Does that work for you ? :-)
100 my tv's IP
103 (on modem rooter) my PC IP

this modem property same. never change

tendi
SamyGO Project Donor
Posts: 118
Joined: Thu Oct 16, 2014 3:57 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by tendi » Sat Jan 03, 2015 1:39 pm

tendi wrote:Fantastic, it works smoothly!
I sang victory too soon!
Now the download of the recordings doesn't finish anymore, I get this kind of message

Code: Select all

Retrieved 581,73 Mb of 581,73 Mb ..
 File successfully retrieved.
 Operation finished .. Waiting for user..
 All recordings on USB listed. Waiting for user.
 Operation finished .. Waiting for user..
In fact the downloaded file size is only 25 MB instead of 581,73. I tried different times, restarted both the tv and the pc but nothing changed.
This thing happens with all the recordings, either on windows and on mac (with wine), over cable lan and over wifi.
Tv model: UE40H6400
Firmware: T-MST14DEUC-2117.5

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Lordbyte » Sat Jan 03, 2015 1:45 pm

I feared something like that could happen.

The case is this :
The Decoder tells the TV to decode the file we want to download.
The TV (hopefully) start to decode the recording. The TV will produce a log that decoding is in progress.
The PVRDecoder monitors this log, looking for a special line that indicates that decoded file has been created and is being written.
At this point the PVRDecoder starts its download under the ASSUMPTION that the decoder-progress on TV is faster than the download.
If it was to happen that download was faster than decoder FTP-server in TV would reach end-of-file too "soon".
sectroyer who programmed the decoder running on your TV promissed it wouldent happen .. ever ! :-)
How fast (slow) is your TV-model ?
I may have to put a switch to serialize, or some parameter were delay can be set ..
Need more feedback .. any !
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

tendi
SamyGO Project Donor
Posts: 118
Joined: Thu Oct 16, 2014 3:57 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by tendi » Sat Jan 03, 2015 1:56 pm

Infact I thought that it could be due to the speed of the connection... A few minutes ago I tried once again and this time I succeeded to download that same file over wifi. Then I connected to the lan in order to download the next file with a better speed and - surprise :) - that happened again. After only 37 MB of 1,15 GB the download stopped. The average transfer speed was 75 MB/s - 113 MB/s.
Tv model: UE40H6400
Firmware: T-MST14DEUC-2117.5

Lordbyte
Official SamyGO Developer
Posts: 1472
Joined: Sun Aug 18, 2013 11:07 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by Lordbyte » Sat Jan 03, 2015 2:00 pm

tendi wrote:Infact I thought that it could be due to the speed of the connection... A few minutes ago a tried once again and this time I succeeded to download that same file over wifi. Then I connected to the lan in order to download the next file with a better speed and - surprise :) - that happened again. After only 37 MB of 1,15 GB the download stopped. The average transfer speed was 75 MB/s - 113 MB/s.
So, do I have a LAN-problem, or is your TV-model low end (no offence) ?
I need either others reporting issue, or accept that a very few TV?s are not fast enough to
support the decoder-faster-than-download pragma .. or should I add a serializing-switch perhaps .. hmmmmm
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.

tendi
SamyGO Project Donor
Posts: 118
Joined: Thu Oct 16, 2014 3:57 pm

Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.

Post by tendi » Sat Jan 03, 2015 2:12 pm

Lordbyte wrote:So, do I have a LAN-problem, or is your TV-model low end (no offence) ?
It may be, I don't know. But consider that it's still a quad core model made in 2014...
Anyway, now I'm downloading over wifi at the average speed of 16 MB/s and it's working.
Tv model: UE40H6400
Firmware: T-MST14DEUC-2117.5

Post Reply

Return to “[F] Software”