Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Here for general support for H series TVs, request and problem solve area.
Post Reply

leikli
SamyGO Project Donor
Posts: 79
Joined: Mon Dec 29, 2014 11:41 pm

Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Post by leikli »

Code: Select all

VDLinux#> uname -a
Linux (none) 3.8.13 #1 SMP PREEMPT Fri May 30 15:18:51 KST 2014 armv7l GNU/Linux
VDLinux#> cat /.version
"Golf.S 0138" KERNEL MODULE VERSION : "0134.1178, DTV, Golf.S, product, MAIN_GOLFS_RCA"
sectroyer wrote:also this one would be useful:

Code: Select all

insmod /mnt/lib/modules/MST14/3.8.13/kernel/fs/cifs/cifs.ko
and then quickly this:

Code: Select all

dmesg | tail

Code: Select all

VDLinux#> insmod /mnt/lib/modules/MST14/3.8.13/kernel/fs/cifs/cifs.ko
insmod: can't insert '/mnt/lib/modules/MST14/3.8.13/kernel/fs/cifs/cifs.ko': invalid module format
VDLinux#> dmesg | tail
sdp-i2c CH:9 ID:0x90(-6)
sdp-i2c CH:9 ID:0x90(-6)
sdp-i2c CH:9 ID:0x90(-6)
sdp-i2c CH:9 ID:0x90(-6)
sdp-i2c CH:9 ID:0x90(-6)
sdp-i2c CH:9 ID:0x90(-6)
sdp-i2c CH:9 ID:0x90(-6)
sdp-i2c CH:9 ID:0x90(-6)
sdp-i2c CH:9 ID:0x90(-6)
cifs: version magic '0122, product SMP preempt mod_unload ARMv7 ' should be '0134, product SMP preempt mod_unload ARMv7 p2v8 '
I suppose this can explain the following lines in my sam.log file:

Code: Select all

insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/aead.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/pcompress.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/cryptomgr.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/crypto_blkcipher.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/md4.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/md5.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/hmac.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/des_generic.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/rng.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/crypto_wq.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/chainiv.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/eseqiv.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/arc4.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/ecb.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/krng.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/ansi_cprng.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/crypto/sha256_generic.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/fs/fuse/fuse.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.8.13/kernel/fs/cifs/cifs.ko': No such file or directory
Model: UE40H7005 Firmware: T-GFSDEUC-1210.5 (previously T-GFSDEUC-1142.0)
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Post by sectroyer »

Yeah. Everything is clear now :) Be patient fix in progress ;)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
leikli
SamyGO Project Donor
Posts: 79
Joined: Mon Dec 29, 2014 11:41 pm

Re: [!!!] Rooting H series

Post by leikli »

sectroyer wrote:
leikli wrote: Could this explain why I cannot log in via ssh? Am I the only one with this issue? Since I have a non-MST TV, I would expect some errors.
new samyext4.img for NON-MST users:
https://www.sendspace.com/file/xfi1ed
Simply put on the usb and replace original file. Hopefully everything will work. MST users might also try "small fixes" for them ;)
Thanks! I am not at home today and I cannot test it right now. I will test it tomorrow evening and report how it works.
Model: UE40H7005 Firmware: T-GFSDEUC-1210.5 (previously T-GFSDEUC-1142.0)
Top
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Post by juusso »

leikli wrote:...
Could you please show full sam.log file?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Top
leikli
SamyGO Project Donor
Posts: 79
Joined: Mon Dec 29, 2014 11:41 pm

Re: Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Post by leikli »

sectroyer wrote:new samyext4.img for NON-MST users:
https://www.sendspace.com/file/xfi1ed
Simply put on the usb and replace original file. Hopefully everything will work. MST users might also try "small fixes" for them ;)
OK, here are my results. I ran the same commands as last time:
VDLinux#> uname -a
Linux (none) 3.8.13 #1 SMP PREEMPT Fri May 30 15:18:51 KST 2014 armv7l GNU/Linux
VDLinux#> cat /.version
"Golf.S 0138" KERNEL MODULE VERSION : "0134.1178, DTV, Golf.S, product, MAIN_GOLFS_RCA"
VDLinux#> insmod /mnt/lib/modules/MST14/3.8.13/kernel/fs/cifs/cifs.ko
insmod: can't insert '/mnt/lib/modules/MST14/3.8.13/kernel/fs/cifs/cifs.ko': File exists
VDLinux#> dmesg | tail
[SABSP] Write protected!!!!!!!
ZLIB_COMPRESSION
#### device loop104 ####
###### bypass = 0 dcache = 1
EXT4-fs (sdb1): error count: 1156
EXT4-fs (sdb1): initial error at 3912: ext4_free_inode:327
EXT4-fs (sdb1): last error at 17: ext4_mb_generate_buddy:744
EXT4-fs (loop3): error count: 107
EXT4-fs (loop3): initial error at 1388744973: ext4_mb_generate_buddy:731
EXT4-fs (loop3): last error at 22: ext4_mb_generate_buddy:744
I don't think everything is OK yet, even though more things work now. I still cannot log in via ssh. I have attached my sam.log file.
You do not have the required permissions to view the files attached to this post.
Model: UE40H7005 Firmware: T-GFSDEUC-1210.5 (previously T-GFSDEUC-1142.0)
Top
leikli
SamyGO Project Donor
Posts: 79
Joined: Mon Dec 29, 2014 11:41 pm

Re: Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Post by leikli »

juuso wrote:Can you post samygo.log from /mnt directory as well?

p.s. Do you noticed you have some patches working, for example ChannelInfoPatch (full infobar visible when switching channels), shorter infobar timings or custom values for sleep timer?
I haven't noticed any changes in the infobar, but I am not sure what to expect. However, the sleep timer values have changed.

If I would like to modify the sleep timer settings to my own values, how should I do?
You do not have the required permissions to view the files attached to this post.
Model: UE40H7005 Firmware: T-GFSDEUC-1210.5 (previously T-GFSDEUC-1142.0)
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Post by sectroyer »

leikli wrote:
juuso wrote:Can you post samygo.log from /mnt directory as well?

p.s. Do you noticed you have some patches working, for example ChannelInfoPatch (full infobar visible when switching channels), shorter infobar timings or custom values for sleep timer?
I haven't noticed any changes in the infobar, but I am not sure what to expect. However, the sleep timer values have changed.

If I would like to modify the sleep timer settings to my own values, how should I do?
lelki please post the results of command:

Code: Select all

lsmod
:)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Post by sectroyer »

and also please run this:

Code: Select all

insmod /mnt/lib/modules/3.8.13/kernel/drivers/pty/newmount.ko
and then quickly :

Code: Select all

dmesg | tail
and this:

Code: Select all

cat /mtd_exe/partition.txt
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Post by sectroyer »

leliki telnet now works?
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
leikli
SamyGO Project Donor
Posts: 79
Joined: Mon Dec 29, 2014 11:41 pm

Re: Model: UE40H7005 Firmware: T-GFSDEUC-1142.0

Post by leikli »

sectroyer wrote:lelki please post the results of command:

Code: Select all

lsmod
:)

Code: Select all

VDLinux#> lsmod
cifs 362440 0 - Live 0xbf196000
fuse 50836 0 - Live 0xbf186000
sha256_generic 8032 0 - Live 0xbf181000
ansi_cprng 2852 0 - Live 0xbf17d000
krng 632 0 - Live 0xbf179000
crypto_wq 392 0 - Live 0xbf165000
rng 1164 2 ansi_cprng,krng, Live 0xbf163000
des_generic 16728 0 - Live 0xbf15b000
hmac 1944 0 - Live 0xbf157000
md5 1204 0 - Live 0xbef84000
md4 2896 0 - Live 0xbef6b000
cryptomgr 1704 0 - Live 0xbef4b000
pcompress 776 0 - Live 0xbef29000
aead 3660 1 cryptomgr, Live 0xbe642000
newpty 8996 0 [permanent], Live 0xbf13c000 (O)
newdevpts 3344 1 newpty, Live 0xbe60b000 (O)
anyver 2820 0 - Live 0xbe435000 (O)
ext4 314160 2 - Live 0xbf0ec000 (O)
mbcache 4172 1 ext4, Live 0xbef97000 (O)
jbd2 62000 1 ext4, Live 0xbf0db000 (O)
usb_storage 33816 2 - Live 0xbef8d000
exfat_fs 15808 0 - Live 0xbef86000
exfat_core 46104 1 exfat_fs, Live 0xbef77000
tntfs 490812 0 - Live 0xbf062000 (P)
ath6kl_usb 605744 0 - Live 0xbefcd000 (O)
cfg80211 179560 1 ath6kl_usb, Live 0xbefa0000 (O)
hid_chicony 1084 0 - Live 0xbef9e000
hid_apple 4000 0 - Live 0xbef9a000
hid_microsoft 1972 0 - Live 0xbe659000
hid_generic 548 0 - Live 0xbe63c000
ohci_hcd 15701 0 - Live 0xbef72000
bthid 2836 0 - Live 0xbe601000 (O)
mousedev 7620 0 - Live 0xbef6d000
evdev 7288 0 - Live 0xbef68000
usbhid 21620 0 - Live 0xbef5f000
hid 68680 6 hid_chicony,hid_apple,hid_microsoft,hid_generic,bthid,usbhid, Live 0xbef4d000
dummy 1292 0 - Live 0xbe5bf000 (O)
batman_adv 109920 0 - Live 0xbef2f000 (O)
libcrc32c 600 0 - Live 0xbe55d000 (O)
bridge 43792 0 - Live 0xbe41c000 (O)
stp 1084 1 bridge, Live 0xbe41a000 (O)
llc 2588 2 bridge,stp, Live 0xbe416000 (O)
tddrvdone 920 0 - Live 0xbef2d000 (O)
tddrvdonecore 1116 1 tddrvdone, Live 0xbef2b000 (PO)
mali_drm 2348 2 - Live 0xbef27000 (O)
samgpldrv 141920 60 - Live 0xbef03000 (O)
samdrv 9071400 17 samgpldrv, Live 0xbe65b000 (PO)
btusb 78176 1 - Live 0xbe644000 (O)
btpcm 12012 1 btusb, Live 0xbe63e000 (O)
btsec 145776 1 btusb, Live 0xbe617000 (O)
sdp_mac 25596 0 - Live 0xbe60d000
btsbc 25860 1 btusb, Live 0xbe603000 (O)
xhci_hcd 68560 0 - Live 0xbe5ef000
ehci_hcd 36904 0 - Live 0xbe5e2000
usbcore 110692 9 usb_storage,ath6kl_usb,ohci_hcd,usbhid,btusb,xhci_hcd,ehci_hcd, Live 0xbe5c3000
usb_common 484 1 usbcore, Live 0xbe5c1000
tddrv 4620 0 - Live 0xbe5bc000 (O)
tddrvcore 366944 10 tddrvdonecore,tddrv, Live 0xbe55f000 (PO)
mali 1198944 28 samdrv, Live 0xbe437000 (O)
hevc 47356 0 - Live 0xbe428000 (O)
tzdrv 49164 20 - Live 0xbe408000 (O)
micom_module 772 0 - Live 0xbe406000 (O)
micom_module_core 19584 5 tddrvdonecore,tddrvcore,micom_module, Live 0xbe400000 (PO)
SpoilerShow
sectroyer wrote:and also please run this:

Code: Select all

insmod /mnt/lib/modules/3.8.13/kernel/drivers/pty/newmount.ko
and then quickly :

Code: Select all

dmesg | tail
and this:

Code: Select all

cat /mtd_exe/partition.txt

Code: Select all

VDLinux#> insmod /mnt/lib/modules/3.8.13/kernel/drivers/pty/newmount.ko
insmod: can't insert '/mnt/lib/modules/3.8.13/kernel/drivers/pty/newmount.ko': Operation not permitted
VDLinux#> dmesg | tail
EXT4-fs error (device sdb1): ext4_mb_generate_buddy:744: group 2515, 19403 clusters in bitmap, 7914 in gd; block bitmap corrupt.
=============================================================
 [newmount] loaded
=============================================================
 [newmount] sys_call_table: 0xc0012f84
 [newmount] sys_mount: 0xc00e7248
 [newmount] sys_umount: 0xc00549dc
 [newmount] found MOV_RD_0x9E9FE3F1 at: 0xc00e6cb0
 [newmount] ORR_RD_RD_7 not found!
=============================================================

Code: Select all

VDLinux#> cat /mtd_exe/partition.txt
v4
partitionID     flash_device_name       flash_device_size       flash_image_name        flash_device_type       flash_upgrade_type      flash_partition_map     flash_mount_path        flash_writable
0       /dev/mmcblk0p0  512K    onboot.bin      MLC     OTHER   BOOTLOADER0     NONE    RO
1       /dev/mmcblk0p1  512K    seret.bin       MLC     USER    SERET0  NONE    RO
2       /dev/mmcblk0p2  512K    seret.bin       MLC     USER    SERET1  NONE    RO
3       /dev/mmcblk0p3  512K    secos.bin       MLC     USER    SECOS0  NONE    RO
4       /dev/mmcblk0p4  0K      ex_partition    MLC     NONE    NONE    NONE    RO
5       /dev/mmcblk0p5  512K    secos.bin       MLC     USER    SECOS1  NONE    RO
6       /dev/mmcblk0p6  7168K   uImage  MLC     USER    KERNEL0 NONE    RO
7       /dev/mmcblk0p7  5632K   rootfs.img      MLC     USER    RFS0    NONE    RO
8       /dev/mmcblk0p8  7168K   uImage  MLC     USER    KERNEL1 NONE    RO
9       /dev/mmcblk0p9  5632K   rootfs.img      MLC     USER    RFS1    NONE    RO
10      /dev/mmcblk0p10 8K      sign0.bin       MLC     NONE    SECUREMAC0      NONE    RO
11      /dev/mmcblk0p11 8K      sign1.bin       MLC     NONE    SECUREMAC1      NONE    RO
12      /dev/mmcblk0p12 8K      VD-HEADER       MLC     NONE    NONE    NONE    RO
13      /dev/mmcblk0p13 3072K   NONE    MLC     NONE    NONE    mtd_drmregion_a RW
14      /dev/mmcblk0p14 3072K   NONE    MLC     NONE    NONE    mtd_drmregion_b RW
15      /dev/mmcblk0p15 204800K NONE    MLC     NONE    NONE    mtd_rwarea      RW
16      /dev/mmcblk0p16 2099200K        uniro.img       MLC     OTHER   NONE    mtd_uniro       RO
17      /dev/mmcblk0p16.v1      0K      exe.img MLC     USER    EXE0    mtd_exe VIRT
18      /dev/mmcblk0p16.v2      0K      exe.img MLC     USER    EXE1    mtd_exe VIRT
19      /dev/mmcblk0p16.v3      0K      rocommon.img    MLC     USER    CONTENT0        mtd_rocommon    VIRT
20      /dev/mmcblk0p16.v4      0K      rocommon.img    MLC     USER    CONTENT1        mtd_rocommon    VIRT
21      /dev/mmcblk0p17 1479520K        unirw.img       MLC     OTHER   NONE    mtd_unirw       RW

# flash_device_type     is used by SLC NAND nand.otp.dump
# flash_upgrade_type    is used by SERET and SWU
# flash_partition_map   is used to distinguish dual partitions
# flash_mount_path      is used by SWU and easy to recognize mounting point
# Micron MAX 3656MB (3743744K) (3833593856)
sectroyer wrote:leliki telnet now works?
Telnet to port 3123 and port 33 works. The TV now responds to telnet to port port 23, but I will never get a shell prompt and it will crash and reboot the TV after a number of seconds.
Model: UE40H7005 Firmware: T-GFSDEUC-1210.5 (previously T-GFSDEUC-1142.0)
Top

Post Reply

Return to “[H] Support”