CIFS/SMB unsupported video data

Here for general support for B series TVs, request and problem solve area.

jw1001
Posts: 166
Joined: Mon Dec 07, 2009 4:58 pm

Re: CIFS/SMB file format not supported

Post by jw1001 »

Which DLNA server is the NAS running? It might be transcoding the files.
User avatar
erdem_ua
SamyGO Admin
Posts: 3126
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: CIFS/SMB unsupported video data

Post by erdem_ua »

I think you could adjust buffer size to resolve that issue. Please look SamyGO Extensions packs init scripts. Increasing buffer size might solve your problem. At least, it solves my problem here.
Do you use WiFi dongle? If you, please try with cable instead of WiFi. Your problem might be related with bandwidth too.
User avatar
erdem_ua
SamyGO Admin
Posts: 3126
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: CIFS/SMB unsupported video data

Post by erdem_ua »

Him, so your problem is related with bandwith. You needed to switch NFS. Also placing a aluminum foil to your Wifi antenna (make it like dish) will increase your signal strength, this will help to your connection to. Is it your router in same room?.

If you can't bear cables, than you might wanted to switch 802.11n supported WiFi dongles that allows 300Mbps connection. But you needed to have 802.11n supported access point or router or modem for it.

If you use WiFi for your computer too, than your BW will be halved. Connect your computer to router with cable. That will solve the issue too.

Try those bit, if you can't solve your problem than we will look this again.
Regards

Post Reply

Return to “[B] Support”