[ROOT] Rooting E/F on latest firmwares
Re: [App] Rooting E/F on latest firmwares
Ok thank you i try it. Question: The Files libsamy.zip, debug and debug 2 from the first posts why does i need them? I can't read it in the instructions from the first post
Re: [App] Rooting E/F on latest firmwares
Follow only the Instructions in the First Post. Don't care about the other Files.
I Summary:
- Small Partition and try
if it not run
- Small Partition + Sleep 120 and try
if it not run
- Reset the Smarthub and make a Factury Reset over Service Menu (don't forget to the OTN to off, after that), try again to root
if it not run
I Summary:
- Small Partition and try
if it not run
- Small Partition + Sleep 120 and try
if it not run
- Reset the Smarthub and make a Factury Reset over Service Menu (don't forget to the OTN to off, after that), try again to root
if it not run
If still no root, replace run.sh in USB SamyGO_data folder by the one from this archive, restart TV, wait a while and paste here sam.log you might find in SamyGO_data.
UE46F6340 with T-MST12DEUC @ 2105.0 & UE55F6500 with T-MST12DEUC @ 2107.1 & UE32F5370 with T-MST12DEUC @ 2111.1
at all: SamyGo work Oscam work
at all: SamyGo work Oscam work
Re: [App] Rooting E/F on latest firmwares
Wow, i get it work! Now i need to set up the Oscam as Newcamd client any info?robert90 wrote:http://tanjasoft.com/how-to/install-osc ... -series-h/majklcze wrote:Now i need to get the OSCAM working can somebody point me where to start?
Here you will find a manual and the necessary files. Costs a few euros , but works very well.
Re: [App] Rooting E/F on latest firmwares
Possible, but certainly not in rooting threadmajklcze wrote:Wow, i get it work! Now i need to set up the Oscam as Newcamd client any info?
I do NOT receive any PM. Please use forum.
Re: [App] Rooting E/F on latest firmwares
Hi, i have tried the instructions of rebornid.
The problem is once I get root and this is after the reboot again inactive or no longer starts .
I have tried everything from the first post and instructions of rebornid sleep 30,120 but dont't start.
run.sh and sam.log does not work well.
After several resets from TV and Smart Hub, it is lucky if samygo after hours 1 start times.
I did it again managed that samygo starts and now I do not reboot. I have now ftp access, Can anyone help now to locate the error?
--- I test this: i restarted the tv if ftp and samy runs with "reboot" in putty telnet!!!! Every reboot the root works with ftp and telnet !!! But i try to start the tv with on/off by remote contol and samy go dont' t work anymore! What is the problem? I don't know!?
The problem is once I get root and this is after the reboot again inactive or no longer starts .
I have tried everything from the first post and instructions of rebornid sleep 30,120 but dont't start.
run.sh and sam.log does not work well.
After several resets from TV and Smart Hub, it is lucky if samygo after hours 1 start times.
I did it again managed that samygo starts and now I do not reboot. I have now ftp access, Can anyone help now to locate the error?
--- I test this: i restarted the tv if ftp and samy runs with "reboot" in putty telnet!!!! Every reboot the root works with ftp and telnet !!! But i try to start the tv with on/off by remote contol and samy go dont' t work anymore! What is the problem? I don't know!?
Re: [App] Rooting E/F on latest firmwares
I could the last time started as samygo the logs back up!
Maybe someone can help?
Maybe someone can help?
You do not have the required permissions to view the files attached to this post.
Re: [App] Rooting E/F on latest firmwares
Well your log shows some OTN stuff Isn't OTN Support disabled ASAP ?stefan81 wrote:I could the last time started as samygo the logs back up!
Maybe someone can help?
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [App] Rooting E/F on latest firmwares
Yes, OTN Support is in the Service Men? OFF.
You do not have the required permissions to view the files attached to this post.
Re: [App] Rooting E/F on latest firmwares
I would try different usb. Root IS working. You can check it by trying telnet on port 5023. As described already in first poststefan81 wrote:Yes, OTN Support is in the Service Men? OFF.
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [App] Rooting E/F on latest firmwares
I had the same problem. If you have telnet access, try using above mentioned commands.Joejoe wrote:...
- Change execute permision:- execute rcSGO with this line:Code: Select all
chmod +x /mtd_rwcommon/SamyGO/rcSGO
- waiting for 5 minutes -> nothing happensCode: Select all
/bin/sh -c "/bin/sh /mtd_rwcommon/SamyGO/rcSGO &" &
- execute rcSGO with this line:- waiting for 5 minutes -> nothing happensCode: Select all
/bin/sh -c "/bin/sh /mtd_rwcommon/SamyGO/rcSGO" &
- don't know why but I try a reboot
- after approximately 1 min my virtual USB appears I could not believe my eyes
...
Greetz Joe
I also had to change sleep time to 30 in the rcsgo file over ftp (path: mtd_rwcommon/SamyGO/rcSGO).
After reboot it worked for me.
You can see that it is ready when virt.usb appears in your sources.